! Started logfile: J0418+3801_L_2010_07_29_pus_uvs.log on Sat Jan  9 14:40:19 2016
obs J0418+3801_L_2010_07_29_pus_uva.fits
! Reading UV FITS file: J0418+3801_L_2010_07_29_pus_uva.fits
! AN table 1: 534 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.764586 visibilities/baseline/integration-bin.
! Found source: J0418+3801
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  1.35446e+09        8e+06          1        8e+06
!  02        2  1.36246e+09        8e+06          1        8e+06
!  03        3  1.42646e+09        8e+06          1        8e+06
!  04        4  1.43446e+09        8e+06          1        8e+06
! 
! Polarization(s): RR LL RL LR
! 
! Read 741 lines of history.
! 
! Reading 293968 visibilities.
select I
! Selecting polarization: I,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.8 
print "taper_size =",taper_size
! taper_size = 15 
![@muppet J0418+3801_L_2010_07_29_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.800x0.800 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 642 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 642 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 642 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 642 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000205Jy  sigma=0.013043
! Fit after  self-cal, rms=0.978875Jy  sigma=0.012787
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.682 mas, bmaj=9.526 mas, bpa=16.52 degrees
! Estimated noise=454.295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38129 Jy
! Component: 100  -  total flux cleaned = 1.78456 Jy
! Total flux subtracted in 100 components = 1.78456 Jy
! Clean residual min=-0.042562 max=0.169820 Jy/beam
! Clean residual mean=-0.000047 rms=0.009104 Jy/beam
! Combined flux in latest and established models = 1.78456 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.78456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.352770Jy  sigma=0.004520
! Fit after  self-cal, rms=0.352751Jy  sigma=0.004520
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.176688 Jy
! Component: 100  -  total flux cleaned = 0.2627 Jy
! Total flux subtracted in 100 components = 0.2627 Jy
! Clean residual min=-0.027355 max=0.041772 Jy/beam
! Clean residual mean=-0.000027 rms=0.005507 Jy/beam
! Combined flux in latest and established models = 2.04726 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 2.04726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206336Jy  sigma=0.002561
! Fit after  self-cal, rms=0.206224Jy  sigma=0.002560
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0491974 Jy
! Component: 100  -  total flux cleaned = 0.0795113 Jy
! Total flux subtracted in 100 components = 0.0795113 Jy
! Clean residual min=-0.026442 max=0.036715 Jy/beam
! Clean residual mean=-0.000022 rms=0.005018 Jy/beam
! Combined flux in latest and established models = 2.12677 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 2.12677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183206Jy  sigma=0.002254
! Fit after  self-cal, rms=0.183202Jy  sigma=0.002254
! Inverting map 
! Added new window around map position (8.8, 5.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334858 Jy
! Component: 100  -  total flux cleaned = 0.054349 Jy
! Total flux subtracted in 100 components = 0.054349 Jy
! Clean residual min=-0.025558 max=0.026911 Jy/beam
! Clean residual mean=-0.000018 rms=0.004785 Jy/beam
! Combined flux in latest and established models = 2.18112 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 43 components and 2.18112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171525Jy  sigma=0.002097
! Fit after  self-cal, rms=0.170741Jy  sigma=0.002089
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.001 mas, bmaj=11.74 mas, bpa=15.28 degrees
! Estimated noise=209.956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360137 Jy
! Component: 100  -  total flux cleaned = 0.0585485 Jy
! Component: 150  -  total flux cleaned = 0.0739272 Jy
! Component: 200  -  total flux cleaned = 0.0820462 Jy
! Total flux subtracted in 200 components = 0.0820462 Jy
! Clean residual min=-0.019490 max=0.019851 Jy/beam
! Clean residual mean=-0.000022 rms=0.003654 Jy/beam
! Combined flux in latest and established models = 2.26316 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 2.26316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162074Jy  sigma=0.001975
! Fit after  self-cal, rms=0.161631Jy  sigma=0.001970
! Inverting map 
! Added new window around map position (17.6, 6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017804 Jy
! Component: 100  -  total flux cleaned = 0.0193935 Jy
! Component: 150  -  total flux cleaned = 0.0207821 Jy
! Component: 200  -  total flux cleaned = 0.0214001 Jy
! Total flux subtracted in 200 components = 0.0214001 Jy
! Clean residual min=-0.018936 max=0.014134 Jy/beam
! Clean residual mean=-0.000012 rms=0.003450 Jy/beam
! Combined flux in latest and established models = 2.28456 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 2.28456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159467Jy  sigma=0.001934
! Fit after  self-cal, rms=0.159201Jy  sigma=0.001931
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        1.00*    KP        1.01     
!   LA        1.03     MK        1.03     NL        1.06     OV        0.99     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.00*    KP        1.03     
!   LA        1.07     MK        1.04     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00*    KP        0.89     
!   LA        0.95     MK        0.91     NL        0.98     OV        0.99     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.00*    KP        0.95     
!   LA        0.97     MK        0.95     NL        0.98     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.159201Jy  sigma=0.001931
! Fit after  self-cal, rms=0.074607Jy  sigma=0.000778
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.011 mas, bmaj=11.78 mas, bpa=15.12 degrees
! Estimated noise=210.436 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00559545 Jy
! Component: 100  -  total flux cleaned = -0.00680585 Jy
! Component: 150  -  total flux cleaned = -0.00809193 Jy
! Component: 200  -  total flux cleaned = -0.00920354 Jy
! Total flux subtracted in 200 components = -0.00920354 Jy
! Clean residual min=-0.005162 max=0.005535 Jy/beam
! Clean residual mean=-0.000003 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 2.27536 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 2.27536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072696Jy  sigma=0.000749
! Fit after  self-cal, rms=0.072640Jy  sigma=0.000748
! Inverting map 
! Added new window around map position (28.8, 15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184476 Jy
! Component: 100  -  total flux cleaned = 0.001069 Jy
! Component: 150  -  total flux cleaned = 0.000534377 Jy
! Component: 200  -  total flux cleaned = 0.000365595 Jy
! Total flux subtracted in 200 components = 0.000365595 Jy
! Clean residual min=-0.004740 max=0.004529 Jy/beam
! Clean residual mean=-0.000001 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 2.27572 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 2.27572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071725Jy  sigma=0.000736
! Fit after  self-cal, rms=0.071697Jy  sigma=0.000736
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071697Jy  sigma=0.000736
! Fit after  self-cal, rms=0.068013Jy  sigma=0.000705
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.015 mas, bmaj=11.77 mas, bpa=15.1 degrees
! Estimated noise=210.649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00287717 Jy
! Component: 100  -  total flux cleaned = -0.0030814 Jy
! Component: 150  -  total flux cleaned = -0.00308603 Jy
! Component: 200  -  total flux cleaned = -0.00323655 Jy
! Total flux subtracted in 200 components = -0.00323655 Jy
! Clean residual min=-0.004513 max=0.004390 Jy/beam
! Clean residual mean=-0.000005 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 2.27249 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 120 components and 2.27249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066968Jy  sigma=0.000694
! Fit after  self-cal, rms=0.066952Jy  sigma=0.000694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000125614 Jy
! Component: 100  -  total flux cleaned = -0.000395893 Jy
! Component: 150  -  total flux cleaned = -0.000393289 Jy
! Component: 200  -  total flux cleaned = -0.000513528 Jy
! Total flux subtracted in 200 components = -0.000513528 Jy
! Clean residual min=-0.004521 max=0.004366 Jy/beam
! Clean residual mean=-0.000005 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 2.27197 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 125 components and 2.27197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066391Jy  sigma=0.000689
! Fit after  self-cal, rms=0.066383Jy  sigma=0.000689
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066383Jy  sigma=0.000689
! Fit after  self-cal, rms=0.060137Jy  sigma=0.000650
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.012 mas, bmaj=11.77 mas, bpa=15.03 degrees
! Estimated noise=210.689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000621528 Jy
! Component: 100  -  total flux cleaned = -0.000915899 Jy
! Component: 150  -  total flux cleaned = -0.000919174 Jy
! Component: 200  -  total flux cleaned = -0.000920842 Jy
! Total flux subtracted in 200 components = -0.000920842 Jy
! Clean residual min=-0.004307 max=0.004469 Jy/beam
! Clean residual mean=-0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 2.27105 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 134 components and 2.27105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059474Jy  sigma=0.000643
! Fit after  self-cal, rms=0.059465Jy  sigma=0.000643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.8, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000518133 Jy
! Component: 100  -  total flux cleaned = -0.000360773 Jy
! Component: 150  -  total flux cleaned = -0.000354359 Jy
! Component: 200  -  total flux cleaned = -0.000481482 Jy
! Total flux subtracted in 200 components = -0.000481482 Jy
! Clean residual min=-0.003045 max=0.003015 Jy/beam
! Clean residual mean=-0.000004 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 2.27057 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 146 components and 2.27057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058443Jy  sigma=0.000636
! Fit after  self-cal, rms=0.058409Jy  sigma=0.000636
! Inverting map 
! Added new window around map position (44.8, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000907316 Jy
! Component: 100  -  total flux cleaned = 0.000782004 Jy
! Component: 150  -  total flux cleaned = 0.00101279 Jy
! Component: 200  -  total flux cleaned = 0.00101313 Jy
! Total flux subtracted in 200 components = 0.00101313 Jy
! Clean residual min=-0.002826 max=0.002317 Jy/beam
! Clean residual mean=-0.000003 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 2.27158 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 158 components and 2.27158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057825Jy  sigma=0.000631
! Fit after  self-cal, rms=0.057812Jy  sigma=0.000631
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057812Jy  sigma=0.000631
! Fit after  self-cal, rms=0.057533Jy  sigma=0.000629
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.64 mas, bmaj=15.73 mas, bpa=18.26 degrees
! Estimated noise=235.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267976 Jy
! Component: 100  -  total flux cleaned = -0.000357144 Jy
! Component: 150  -  total flux cleaned = -0.000293752 Jy
! Component: 200  -  total flux cleaned = -0.000130519 Jy
! Total flux subtracted in 200 components = -0.000130519 Jy
! Clean residual min=-0.001729 max=0.001687 Jy/beam
! Clean residual mean=-0.000003 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 2.27145 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 193 components and 2.27145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057399Jy  sigma=0.000627
! Fit after  self-cal, rms=0.057394Jy  sigma=0.000627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279436 Jy
! Component: 100  -  total flux cleaned = 0.000371957 Jy
! Component: 150  -  total flux cleaned = 0.000495016 Jy
! Component: 200  -  total flux cleaned = 0.000608491 Jy
! Total flux subtracted in 200 components = 0.000608491 Jy
! Clean residual min=-0.001738 max=0.001642 Jy/beam
! Clean residual mean=-0.000002 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 2.27206 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 208 components and 2.27206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057315Jy  sigma=0.000626
! Fit after  self-cal, rms=0.057311Jy  sigma=0.000626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.013 mas, bmaj=11.77 mas, bpa=14.97 degrees
! Estimated noise=210.742 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.013 x 11.77 at 14.97 degrees (North through East)
! Clean map  min=-0.0064808  max=1.8694 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057311Jy  sigma=0.000626
! Fit after  self-cal, rms=0.052784Jy  sigma=0.000569
! Inverting map and beam 
! Estimated beam: bmin=6.014 mas, bmaj=11.77 mas, bpa=14.95 degrees
! Estimated noise=210.752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197289 Jy
! Component: 100  -  total flux cleaned = -8.06187e-05 Jy
! Component: 150  -  total flux cleaned = -8.35839e-05 Jy
! Component: 200  -  total flux cleaned = -8.06656e-05 Jy
! Total flux subtracted in 200 components = -8.06656e-05 Jy
! Clean residual min=-0.002281 max=0.002136 Jy/beam
! Clean residual mean=0.000000 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 2.27198 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 213 components and 2.27198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052155Jy  sigma=0.000565
! Fit after  self-cal, rms=0.052143Jy  sigma=0.000565
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120775 Jy
! Component: 100  -  total flux cleaned = -0.00022178 Jy
! Component: 150  -  total flux cleaned = -0.000316131 Jy
! Component: 200  -  total flux cleaned = -0.00031662 Jy
! Total flux subtracted in 200 components = -0.00031662 Jy
! Clean residual min=-0.002112 max=0.002126 Jy/beam
! Clean residual mean=0.000000 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 2.27167 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 214 components and 2.27167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051674Jy  sigma=0.000562
! Fit after  self-cal, rms=0.051665Jy  sigma=0.000562
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051665Jy  sigma=0.000562
! Fit after  self-cal, rms=0.051543Jy  sigma=0.000561
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.678 mas, bmaj=9.518 mas, bpa=15.92 degrees
! Estimated noise=457.374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.39142 Jy
! Component: 100  -  total flux cleaned = 1.80339 Jy
! Component: 150  -  total flux cleaned = 1.98378 Jy
! Component: 200  -  total flux cleaned = 2.06894 Jy
! Total flux subtracted in 200 components = 2.06894 Jy
! Clean residual min=-0.013994 max=0.040524 Jy/beam
! Clean residual mean=-0.000020 rms=0.003064 Jy/beam
! Combined flux in latest and established models = 2.06894 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.06894 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.014 mas, bmaj=11.76 mas, bpa=14.9 degrees
! Estimated noise=210.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0766355 Jy
! Component: 100  -  total flux cleaned = 0.119416 Jy
! Component: 150  -  total flux cleaned = 0.145655 Jy
! Component: 200  -  total flux cleaned = 0.162555 Jy
! Total flux subtracted in 200 components = 0.162555 Jy
! Clean residual min=-0.004015 max=0.009254 Jy/beam
! Clean residual mean=-0.000018 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 2.2315 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 65 components and 2.2315 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118476 Jy
! Component: 100  -  total flux cleaned = 0.0194454 Jy
! Component: 150  -  total flux cleaned = 0.0221899 Jy
! Component: 200  -  total flux cleaned = 0.0243978 Jy
! Total flux subtracted in 200 components = 0.0243978 Jy
! Clean residual min=-0.004455 max=0.004978 Jy/beam
! Clean residual mean=-0.000007 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 2.2559 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 79 components and 2.2559 Jy
! Inverting map 
! Added new window around map position (0, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157693 Jy
! Component: 100  -  total flux cleaned = 0.00275444 Jy
! Component: 150  -  total flux cleaned = 0.00406553 Jy
! Component: 200  -  total flux cleaned = 0.00488891 Jy
! Total flux subtracted in 200 components = 0.00488891 Jy
! Clean residual min=-0.003377 max=0.003509 Jy/beam
! Clean residual mean=-0.000005 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 2.26079 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 2.26079 Jy
! Inverting map 
! Added new window around map position (10.4, -10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601124 Jy
! Component: 100  -  total flux cleaned = 0.00116885 Jy
! Component: 150  -  total flux cleaned = 0.00153322 Jy
! Component: 200  -  total flux cleaned = 0.00188327 Jy
! Total flux subtracted in 200 components = 0.00188327 Jy
! Clean residual min=-0.002885 max=0.003097 Jy/beam
! Clean residual mean=-0.000004 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 2.26267 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 108 components and 2.26267 Jy
! Inverting map 
! Added new window around map position (-0.8, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000530704 Jy
! Component: 100  -  total flux cleaned = 0.00102703 Jy
! Component: 150  -  total flux cleaned = 0.0013465 Jy
! Component: 200  -  total flux cleaned = 0.0016517 Jy
! Total flux subtracted in 200 components = 0.0016517 Jy
! Clean residual min=-0.002556 max=0.002530 Jy/beam
! Clean residual mean=-0.000004 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 2.26432 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 115 components and 2.26432 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 15 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.65 mas, bmaj=15.74 mas, bpa=18.2 degrees
! Estimated noise=235.056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334611 Jy
! Component: 100  -  total flux cleaned = 0.00525712 Jy
! Component: 150  -  total flux cleaned = 0.00571339 Jy
! Component: 200  -  total flux cleaned = 0.00597435 Jy
! Total flux subtracted in 200 components = 0.00597435 Jy
! Clean residual min=-0.001598 max=0.001760 Jy/beam
! Clean residual mean=0.000000 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 2.2703 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175717 Jy
! Component: 100  -  total flux cleaned = 0.000229497 Jy
! Component: 150  -  total flux cleaned = 0.000227235 Jy
! Component: 200  -  total flux cleaned = 0.000181969 Jy
! Total flux subtracted in 200 components = 0.000181969 Jy
! Clean residual min=-0.001575 max=0.001691 Jy/beam
! Clean residual mean=0.000001 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 2.27048 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 184 components and 2.27048 Jy
! Inverting map 
! Added new window around map position (69.6, 38.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154484 Jy
! Component: 100  -  total flux cleaned = 0.00197525 Jy
! Component: 150  -  total flux cleaned = 0.00221707 Jy
! Component: 200  -  total flux cleaned = 0.00241001 Jy
! Total flux subtracted in 200 components = 0.00241001 Jy
! Clean residual min=-0.001484 max=0.001127 Jy/beam
! Clean residual mean=0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 2.27289 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 209 components and 2.27289 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.014 mas, bmaj=11.76 mas, bpa=14.9 degrees
! Estimated noise=210.78 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000643556 Jy
! Component: 100  -  total flux cleaned = -0.000632532 Jy
! Component: 150  -  total flux cleaned = -0.000632665 Jy
! Component: 200  -  total flux cleaned = -0.000504868 Jy
! Total flux subtracted in 200 components = -0.000504868 Jy
! Clean residual min=-0.002106 max=0.002188 Jy/beam
! Clean residual mean=0.000001 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 2.27238 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 215 components and 2.27238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052470Jy  sigma=0.000574
! Fit after  self-cal, rms=0.052350Jy  sigma=0.000573
wmodel J0418+3801_L_2010_07_29_pus_map.mod
! Writing 215 model components to file: J0418+3801_L_2010_07_29_pus_map.mod
wobs J0418+3801_L_2010_07_29_pus_uvs.fits
! Writing UV FITS file: J0418+3801_L_2010_07_29_pus_uvs.fits
wwins J0418+3801_L_2010_07_29_pus_map.win
! wwins: Wrote 10 windows to J0418+3801_L_2010_07_29_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229403 Jy
! Component: 100  -  total flux cleaned = 0.000272009 Jy
! Component: 150  -  total flux cleaned = 0.000314414 Jy
! Component: 200  -  total flux cleaned = 0.000314413 Jy
! Component: 250  -  total flux cleaned = 0.000314591 Jy
! Component: 300  -  total flux cleaned = 0.000314878 Jy
! Component: 350  -  total flux cleaned = 0.000275304 Jy
! Component: 400  -  total flux cleaned = 0.000314726 Jy
! Component: 450  -  total flux cleaned = 0.000315107 Jy
! Component: 500  -  total flux cleaned = 0.000353162 Jy
! Component: 550  -  total flux cleaned = 0.000315433 Jy
! Component: 600  -  total flux cleaned = 0.000315665 Jy
! Component: 650  -  total flux cleaned = 0.000315461 Jy
! Component: 700  -  total flux cleaned = 0.000389102 Jy
! Component: 750  -  total flux cleaned = 0.000316006 Jy
! Component: 800  -  total flux cleaned = 0.000352087 Jy
! Component: 850  -  total flux cleaned = 0.000352234 Jy
! Component: 900  -  total flux cleaned = 0.00031645 Jy
! Component: 950  -  total flux cleaned = 0.000387347 Jy
! Component: 1000  -  total flux cleaned = 0.000317136 Jy
! Component: 1050  -  total flux cleaned = 0.000317267 Jy
! Component: 1100  -  total flux cleaned = 0.000282621 Jy
! Component: 1150  -  total flux cleaned = 0.000351447 Jy
! Component: 1200  -  total flux cleaned = 0.000317115 Jy
! Component: 1250  -  total flux cleaned = 0.000351342 Jy
! Component: 1300  -  total flux cleaned = 0.000351411 Jy
! Component: 1350  -  total flux cleaned = 0.000351195 Jy
! Component: 1400  -  total flux cleaned = 0.000351207 Jy
! Component: 1450  -  total flux cleaned = 0.000350982 Jy
! Component: 1500  -  total flux cleaned = 0.000318243 Jy
! Component: 1550  -  total flux cleaned = 0.000383645 Jy
! Component: 1600  -  total flux cleaned = 0.000384065 Jy
! Component: 1650  -  total flux cleaned = 0.000416738 Jy
! Component: 1700  -  total flux cleaned = 0.000480768 Jy
! Component: 1750  -  total flux cleaned = 0.000353954 Jy
! Component: 1800  -  total flux cleaned = 0.000417622 Jy
! Component: 1850  -  total flux cleaned = 0.00038645 Jy
! Component: 1900  -  total flux cleaned = 0.000449194 Jy
! Component: 1950  -  total flux cleaned = 0.000511391 Jy
! Component: 2000  -  total flux cleaned = 0.000419116 Jy
! Component: 2050  -  total flux cleaned = 0.000480477 Jy
! Component: 2100  -  total flux cleaned = 0.000480522 Jy
! Component: 2150  -  total flux cleaned = 0.000480775 Jy
! Component: 2200  -  total flux cleaned = 0.000450646 Jy
! Component: 2250  -  total flux cleaned = 0.000510516 Jy
! Component: 2300  -  total flux cleaned = 0.000451186 Jy
! Component: 2350  -  total flux cleaned = 0.000480758 Jy
! Component: 2400  -  total flux cleaned = 0.00048106 Jy
! Component: 2450  -  total flux cleaned = 0.000451666 Jy
! Component: 2500  -  total flux cleaned = 0.000480552 Jy
! Component: 2550  -  total flux cleaned = 0.000567869 Jy
! Component: 2600  -  total flux cleaned = 0.000509982 Jy
! Component: 2650  -  total flux cleaned = 0.000538332 Jy
! Component: 2700  -  total flux cleaned = 0.000509801 Jy
! Component: 2750  -  total flux cleaned = 0.000509931 Jy
! Component: 2800  -  total flux cleaned = 0.000594591 Jy
! Component: 2850  -  total flux cleaned = 0.000594748 Jy
! Component: 2900  -  total flux cleaned = 0.000622579 Jy
! Component: 2950  -  total flux cleaned = 0.000567197 Jy
! Component: 3000  -  total flux cleaned = 0.000622768 Jy
! Component: 3050  -  total flux cleaned = 0.000705975 Jy
! Component: 3100  -  total flux cleaned = 0.000651329 Jy
! Component: 3150  -  total flux cleaned = 0.000733374 Jy
! Component: 3200  -  total flux cleaned = 0.000760742 Jy
! Component: 3250  -  total flux cleaned = 0.000760413 Jy
! Component: 3300  -  total flux cleaned = 0.000894663 Jy
! Component: 3350  -  total flux cleaned = 0.000867949 Jy
! Component: 3400  -  total flux cleaned = 0.000841387 Jy
! Component: 3450  -  total flux cleaned = 0.000894383 Jy
! Component: 3500  -  total flux cleaned = 0.000920791 Jy
! Component: 3550  -  total flux cleaned = 0.000947198 Jy
! Component: 3600  -  total flux cleaned = 0.000999231 Jy
! Component: 3650  -  total flux cleaned = 0.000973216 Jy
! Component: 3700  -  total flux cleaned = 0.00102512 Jy
! Component: 3750  -  total flux cleaned = 0.00107687 Jy
! Component: 3800  -  total flux cleaned = 0.00107695 Jy
! Component: 3850  -  total flux cleaned = 0.00107702 Jy
! Component: 3900  -  total flux cleaned = 0.00105147 Jy
! Component: 3950  -  total flux cleaned = 0.0010518 Jy
! Component: 4000  -  total flux cleaned = 0.00105193 Jy
! Component: 4050  -  total flux cleaned = 0.00112715 Jy
! Total flux subtracted in 4096 components = 0.00110237 Jy
! Clean residual min=-0.001251 max=0.001437 Jy/beam
! Clean residual mean=0.000000 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 2.27349 Jy
keep
! Adding 137 model components to the UV plane model.
! The established model now contains 336 components and 2.27348 Jy
![Exited script file: muppet]
wmap "J0418+3801_L_2010_07_29_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.014 x 11.76 at 14.9 degrees (North through East)
! Clean map  min=-0.0054029  max=1.8722 Jy/beam
! Writing clean map to FITS file: J0418+3801_L_2010_07_29_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.8722 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00039697 
device "J0418+3801_L_2010_07_29_pus\_map.eps/VPS"
! Attempting to open device: 'J0418+3801_L_2010_07_29_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0636102 0.0636102 0.12722 0.254441 0.508882 1.01776 2.03553 4.07105 8.1421 16.2842 32.5684 65.1368
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.872 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.014 x 11.76 at 14.9 degrees (North through East)
! Clean map  min=-0.0054029  max=1.8722 Jy/beam
quit
! Quitting program
! Log file J0418+3801_L_2010_07_29_pus_uvs.log closed on Sat Jan  9 14:40:42 2016