! Started logfile: J2327-1447_S_1997_01_11_pus_uve.log on Sun Feb  5 18:40:02 2006
obs J2327-1447_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J2327-1447_S_1997_01_11_pus_uva.fits
! AN table 1: 268 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.759204 visibilities/baseline/integration-bin.
! Found source: J2327-1447
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 36624 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 163 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.537774 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.508348Jy  sigma=6.103120
! Fit after  self-cal, rms=0.508142Jy  sigma=6.099744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.752 mas, bmaj=7.115 mas, bpa=-6.228 degrees
! Estimated noise=1.69018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.440765 Jy
! Component: 100  -  total flux cleaned = 0.487698 Jy
! Total flux subtracted in 100 components = 0.487698 Jy
! Clean residual min=-0.020251 max=0.026730 Jy/beam
! Clean residual mean=0.000337 rms=0.005113 Jy/beam
! Combined flux in latest and established models = 0.487698 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.487698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153562Jy  sigma=1.564188
! Fit after  self-cal, rms=0.153527Jy  sigma=1.564062
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=9.205 mas, bpa=-5.085 degrees
! Estimated noise=1.14278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00682567 Jy
! Component: 100  -  total flux cleaned = 0.00679879 Jy
! Component: 150  -  total flux cleaned = 0.00619604 Jy
! Component: 200  -  total flux cleaned = 0.00536488 Jy
! Total flux subtracted in 200 components = 0.00536488 Jy
! Clean residual min=-0.012465 max=0.013653 Jy/beam
! Clean residual mean=0.000585 rms=0.004035 Jy/beam
! Combined flux in latest and established models = 0.493063 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.493063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.147820Jy  sigma=1.515215
! Fit after  self-cal, rms=0.147785Jy  sigma=1.515055
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.716 x 9.205 at -5.085 degrees (North through East)
! Clean map  min=-0.012272  max=0.50208 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02915
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        1.17     KP        0.86     
!   LA        0.99     MK        0.97     NL        0.80     OV        1.07     
!   PT        1.07     SC        0.84     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.987642
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.23     KP        0.98     
!   LA        1.06     MK        0.99     NL        0.85     OV        1.03     
!   PT        1.03     SC        0.87     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.03279
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.04     HN        1.08     KP        0.89     
!   LA        0.79     MK        0.88     NL        0.92     OV        0.90     
!   PT        1.24     SC        1.02     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.980442
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.24     KP        0.94     
!   LA        0.89     MK        0.98     NL        0.99     OV        1.06     
!   PT        1.13     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.147785Jy  sigma=1.515055
! Fit after  self-cal, rms=0.124976Jy  sigma=1.275285
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124976Jy  sigma=1.275285
! Fit after  self-cal, rms=0.125020Jy  sigma=1.275109
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.667 mas, bmaj=8.81 mas, bpa=-3.944 degrees
! Estimated noise=1.13784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00854757 Jy
! Component: 100  -  total flux cleaned = 0.00873147 Jy
! Component: 150  -  total flux cleaned = 0.00859382 Jy
! Component: 200  -  total flux cleaned = 0.00848788 Jy
! Total flux subtracted in 200 components = 0.00848788 Jy
! Clean residual min=-0.005549 max=0.009070 Jy/beam
! Clean residual mean=0.000618 rms=0.002160 Jy/beam
! Combined flux in latest and established models = 0.50155 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.50155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124760Jy  sigma=1.268879
! Fit after  self-cal, rms=0.124755Jy  sigma=1.268834
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124755Jy  sigma=1.268834
! Fit after  self-cal, rms=0.114142Jy  sigma=1.127851
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, -53.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103493 Jy
! Component: 100  -  total flux cleaned = 0.0153224 Jy
! Component: 150  -  total flux cleaned = 0.0178436 Jy
! Component: 200  -  total flux cleaned = 0.0198366 Jy
! Total flux subtracted in 200 components = 0.0198366 Jy
! Clean residual min=-0.005026 max=0.008290 Jy/beam
! Clean residual mean=0.000549 rms=0.001869 Jy/beam
! Combined flux in latest and established models = 0.521387 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 54 components and 0.521387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113142Jy  sigma=1.116963
! Fit after  self-cal, rms=0.112953Jy  sigma=1.109998
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.667 x 8.81 at -3.944 degrees (North through East)
! Clean map  min=-0.0051682  max=0.50823 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112953Jy  sigma=1.109998
! Fit after  self-cal, rms=0.110040Jy  sigma=1.044510
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110040Jy  sigma=1.044510
! Fit after  self-cal, rms=0.110149Jy  sigma=1.043886
! Inverting map and beam 
! Estimated beam: bmin=3.65 mas, bmaj=8.796 mas, bpa=-3.551 degrees
! Estimated noise=1.13311 mJy/beam.
! Added new window around map position (-22.5, -64).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740591 Jy
! Component: 100  -  total flux cleaned = 0.0087671 Jy
! Component: 150  -  total flux cleaned = 0.00927799 Jy
! Component: 200  -  total flux cleaned = 0.00983768 Jy
! Total flux subtracted in 200 components = 0.00983768 Jy
! Clean residual min=-0.004727 max=0.006434 Jy/beam
! Clean residual mean=0.000325 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.531225 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.531225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109801Jy  sigma=1.037929
! Fit after  self-cal, rms=0.109855Jy  sigma=1.037623
! Inverting map 
! Added new window around map position (-18.5, -11.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00646083 Jy
! Component: 100  -  total flux cleaned = 0.00675112 Jy
! Component: 150  -  total flux cleaned = 0.00724032 Jy
! Component: 200  -  total flux cleaned = 0.00735608 Jy
! Total flux subtracted in 200 components = 0.00735608 Jy
! Clean residual min=-0.004488 max=0.005250 Jy/beam
! Clean residual mean=0.000280 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.538581 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 0.538581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109439Jy  sigma=1.031668
! Fit after  self-cal, rms=0.109424Jy  sigma=1.031334
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109424Jy  sigma=1.031334
! Fit after  self-cal, rms=0.107760Jy  sigma=0.995209
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107760Jy  sigma=0.995209
! Fit after  self-cal, rms=0.107802Jy  sigma=0.995170
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=8.783 mas, bpa=-3.591 degrees
! Estimated noise=1.13219 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156071 Jy
! Component: 100  -  total flux cleaned = 0.00156923 Jy
! Component: 150  -  total flux cleaned = 0.00166508 Jy
! Component: 200  -  total flux cleaned = 0.001662 Jy
! Total flux subtracted in 200 components = 0.001662 Jy
! Clean residual min=-0.004093 max=0.004936 Jy/beam
! Clean residual mean=0.000251 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.540243 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 110 components and 0.540243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107635Jy  sigma=0.993055
! Fit after  self-cal, rms=0.107643Jy  sigma=0.992969
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.801 mas, bmaj=14.27 mas, bpa=1.064 degrees
! Estimated noise=1.38031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217805 Jy
! Component: 100  -  total flux cleaned = 0.00266867 Jy
! Component: 150  -  total flux cleaned = 0.00295703 Jy
! Component: 200  -  total flux cleaned = 0.00339073 Jy
! Total flux subtracted in 200 components = 0.00339073 Jy
! Clean residual min=-0.005330 max=0.005570 Jy/beam
! Clean residual mean=0.000434 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 0.543634 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 141 components and 0.543634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107554Jy  sigma=0.992471
! Fit after  self-cal, rms=0.107550Jy  sigma=0.992394
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.724 mas, bmaj=6.921 mas, bpa=-5.514 degrees
! Estimated noise=1.6712 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.438441 Jy
! Component: 100  -  total flux cleaned = 0.499344 Jy
! Component: 150  -  total flux cleaned = 0.503077 Jy
! Component: 200  -  total flux cleaned = 0.505408 Jy
! Total flux subtracted in 200 components = 0.505408 Jy
! Clean residual min=-0.006352 max=0.008369 Jy/beam
! Clean residual mean=0.000185 rms=0.001891 Jy/beam
! Combined flux in latest and established models = 0.505408 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.505408 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=8.783 mas, bpa=-3.591 degrees
! Estimated noise=1.13219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.011097 Jy
! Component: 100  -  total flux cleaned = 0.0169821 Jy
! Component: 150  -  total flux cleaned = 0.020194 Jy
! Component: 200  -  total flux cleaned = 0.0232438 Jy
! Total flux subtracted in 200 components = 0.0232438 Jy
! Clean residual min=-0.004522 max=0.005033 Jy/beam
! Clean residual mean=0.000280 rms=0.001393 Jy/beam
! Combined flux in latest and established models = 0.528652 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 0.528652 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.801 mas, bmaj=14.27 mas, bpa=1.064 degrees
! Estimated noise=1.38031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00675234 Jy
! Component: 100  -  total flux cleaned = 0.0110705 Jy
! Component: 150  -  total flux cleaned = 0.012627 Jy
! Component: 200  -  total flux cleaned = 0.0131702 Jy
! Total flux subtracted in 200 components = 0.0131702 Jy
! Clean residual min=-0.005758 max=0.005728 Jy/beam
! Clean residual mean=0.000428 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 0.541823 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 103 components and 0.541823 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=8.783 mas, bpa=-3.591 degrees
! Estimated noise=1.13219 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00136271 Jy
! Component: 100  -  total flux cleaned = -0.00213973 Jy
! Component: 150  -  total flux cleaned = -0.00227268 Jy
! Component: 200  -  total flux cleaned = -0.002521 Jy
! Total flux subtracted in 200 components = -0.002521 Jy
! Clean residual min=-0.004262 max=0.005186 Jy/beam
! Clean residual mean=0.000246 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.539302 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.539302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107850Jy  sigma=0.996657
! Fit after  self-cal, rms=0.107866Jy  sigma=0.996431
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 21 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J2327-1447_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J2327-1447_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J2327-1447_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:40:59 2006