! Started logfile: J2236-1433_S_1997_01_11_pus_uve.log on Sun Feb  5 18:38:08 2006
obs J2236-1433_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J2236-1433_S_1997_01_11_pus_uva.fits
! AN table 1: 204 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.900545 visibilities/baseline/integration-bin.
! Found source: J2236-1433
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 33068 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.299793 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.763826Jy  sigma=8.529967
! Fit after  self-cal, rms=0.762387Jy  sigma=8.514687
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.726 mas, bmaj=7.025 mas, bpa=-2.638 degrees
! Estimated noise=1.83169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.20077 Jy
! Component: 100  -  total flux cleaned = 0.24748 Jy
! Total flux subtracted in 100 components = 0.24748 Jy
! Clean residual min=-0.014329 max=0.032024 Jy/beam
! Clean residual mean=0.000124 rms=0.004310 Jy/beam
! Combined flux in latest and established models = 0.24748 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.24748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155157Jy  sigma=1.458522
! Fit after  self-cal, rms=0.155134Jy  sigma=1.456517
! Inverting map 
! Added new window around map position (5, -0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0375091 Jy
! Component: 100  -  total flux cleaned = 0.0567288 Jy
! Total flux subtracted in 100 components = 0.0567288 Jy
! Clean residual min=-0.011581 max=0.017882 Jy/beam
! Clean residual mean=0.000158 rms=0.003509 Jy/beam
! Combined flux in latest and established models = 0.304209 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 47 components and 0.304209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145085Jy  sigma=1.331738
! Fit after  self-cal, rms=0.144198Jy  sigma=1.316093
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.624 mas, bmaj=9.189 mas, bpa=-4.431 degrees
! Estimated noise=1.15182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206768 Jy
! Component: 100  -  total flux cleaned = 0.026238 Jy
! Component: 150  -  total flux cleaned = 0.0281487 Jy
! Component: 200  -  total flux cleaned = 0.0290481 Jy
! Total flux subtracted in 200 components = 0.0290481 Jy
! Clean residual min=-0.010234 max=0.012615 Jy/beam
! Clean residual mean=0.000520 rms=0.003293 Jy/beam
! Combined flux in latest and established models = 0.333257 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 45 model components to the UV plane model.
! The established model now contains 82 components and 0.333257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141675Jy  sigma=1.285870
! Fit after  self-cal, rms=0.141448Jy  sigma=1.282069
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.624 x 9.189 at -4.431 degrees (North through East)
! Clean map  min=-0.010202  max=0.23812 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.03484
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.28     KP        0.84     
!   LA        0.94     MK        0.94     NL        0.77     OV        1.05     
!   PT        1.04     SC        0.84     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.980568
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.12     HN        1.46     KP        0.99     
!   LA        1.05     MK        0.98     NL        0.78     OV        1.02     
!   PT        1.03     SC        0.85     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01644
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.05     HN        1.28     KP        0.90     
!   LA        0.79     MK        0.85     NL        0.87     OV        0.92     
!   PT        1.21     SC        1.05     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.949645
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     HN        1.57     KP        0.94     
!   LA        0.85     MK        0.94     NL        0.98     OV        1.05     
!   PT        1.14     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.141448Jy  sigma=1.282069
! Fit after  self-cal, rms=0.133929Jy  sigma=1.187691
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133929Jy  sigma=1.187691
! Fit after  self-cal, rms=0.133967Jy  sigma=1.186952
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.632 mas, bmaj=8.782 mas, bpa=-3.521 degrees
! Estimated noise=1.11858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000958222 Jy
! Component: 100  -  total flux cleaned = -0.00230248 Jy
! Component: 150  -  total flux cleaned = -0.00314728 Jy
! Component: 200  -  total flux cleaned = -0.00337858 Jy
! Total flux subtracted in 200 components = -0.00337858 Jy
! Clean residual min=-0.005790 max=0.007496 Jy/beam
! Clean residual mean=0.000505 rms=0.002067 Jy/beam
! Combined flux in latest and established models = 0.329878 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 96 components and 0.329878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133572Jy  sigma=1.181704
! Fit after  self-cal, rms=0.133538Jy  sigma=1.180804
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133538Jy  sigma=1.180804
! Fit after  self-cal, rms=0.128442Jy  sigma=1.111395
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234768 Jy
! Component: 100  -  total flux cleaned = 0.00255148 Jy
! Component: 150  -  total flux cleaned = 0.00246826 Jy
! Component: 200  -  total flux cleaned = 0.00246997 Jy
! Total flux subtracted in 200 components = 0.00246997 Jy
! Clean residual min=-0.005350 max=0.007475 Jy/beam
! Clean residual mean=0.000506 rms=0.002007 Jy/beam
! Combined flux in latest and established models = 0.332348 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.332348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128338Jy  sigma=1.109765
! Fit after  self-cal, rms=0.128296Jy  sigma=1.106114
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.632 x 8.782 at -3.521 degrees (North through East)
! Clean map  min=-0.0053276  max=0.23656 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128296Jy  sigma=1.106114
! Fit after  self-cal, rms=0.128743Jy  sigma=1.057410
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128743Jy  sigma=1.057410
! Fit after  self-cal, rms=0.128849Jy  sigma=1.056983
! Inverting map and beam 
! Estimated beam: bmin=3.62 mas, bmaj=8.718 mas, bpa=-3.465 degrees
! Estimated noise=1.10745 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120588 Jy
! Component: 100  -  total flux cleaned = 0.00115198 Jy
! Component: 150  -  total flux cleaned = 0.00110709 Jy
! Component: 200  -  total flux cleaned = 0.00102263 Jy
! Total flux subtracted in 200 components = 0.00102263 Jy
! Clean residual min=-0.004659 max=0.007070 Jy/beam
! Clean residual mean=0.000345 rms=0.001727 Jy/beam
! Combined flux in latest and established models = 0.333371 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 114 components and 0.333371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128742Jy  sigma=1.056361
! Fit after  self-cal, rms=0.128763Jy  sigma=1.056274
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128763Jy  sigma=1.056274
! Fit after  self-cal, rms=0.128420Jy  sigma=1.018298
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128420Jy  sigma=1.018298
! Fit after  self-cal, rms=0.128456Jy  sigma=1.018206
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=8.78 mas, bpa=-3.958 degrees
! Estimated noise=1.11206 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232684 Jy
! Component: 100  -  total flux cleaned = 0.00219972 Jy
! Component: 150  -  total flux cleaned = 0.00209222 Jy
! Component: 200  -  total flux cleaned = 0.0020439 Jy
! Total flux subtracted in 200 components = 0.0020439 Jy
! Clean residual min=-0.004464 max=0.007024 Jy/beam
! Clean residual mean=0.000324 rms=0.001681 Jy/beam
! Combined flux in latest and established models = 0.335415 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 121 components and 0.335415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128446Jy  sigma=1.017238
! Fit after  self-cal, rms=0.128451Jy  sigma=1.017183
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.266 mas, bmaj=14.86 mas, bpa=3.923 degrees
! Estimated noise=1.36593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000371894 Jy
! Component: 100  -  total flux cleaned = 0.000559962 Jy
! Component: 150  -  total flux cleaned = 0.000559856 Jy
! Component: 200  -  total flux cleaned = 0.000527456 Jy
! Total flux subtracted in 200 components = 0.000527456 Jy
! Clean residual min=-0.005357 max=0.007647 Jy/beam
! Clean residual mean=0.000605 rms=0.002305 Jy/beam
! Combined flux in latest and established models = 0.335942 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 124 components and 0.335942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128434Jy  sigma=1.017276
! Fit after  self-cal, rms=0.128432Jy  sigma=1.017218
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.702 mas, bmaj=6.882 mas, bpa=-2.695 degrees
! Estimated noise=1.77898 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.197337 Jy
! Component: 100  -  total flux cleaned = 0.252949 Jy
! Component: 150  -  total flux cleaned = 0.284428 Jy
! Component: 200  -  total flux cleaned = 0.303725 Jy
! Total flux subtracted in 200 components = 0.303725 Jy
! Clean residual min=-0.006593 max=0.007621 Jy/beam
! Clean residual mean=0.000095 rms=0.002080 Jy/beam
! Combined flux in latest and established models = 0.303725 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.303725 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=8.78 mas, bpa=-3.958 degrees
! Estimated noise=1.11206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183706 Jy
! Component: 100  -  total flux cleaned = 0.0260494 Jy
! Component: 150  -  total flux cleaned = 0.0294305 Jy
! Component: 200  -  total flux cleaned = 0.0299804 Jy
! Total flux subtracted in 200 components = 0.0299804 Jy
! Clean residual min=-0.004686 max=0.006856 Jy/beam
! Clean residual mean=0.000327 rms=0.001698 Jy/beam
! Combined flux in latest and established models = 0.333706 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 71 components and 0.333706 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.266 mas, bmaj=14.86 mas, bpa=3.923 degrees
! Estimated noise=1.36593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212912 Jy
! Component: 100  -  total flux cleaned = 0.00217966 Jy
! Component: 150  -  total flux cleaned = 0.00222194 Jy
! Component: 200  -  total flux cleaned = 0.00222367 Jy
! Total flux subtracted in 200 components = 0.00222367 Jy
! Clean residual min=-0.005394 max=0.007624 Jy/beam
! Clean residual mean=0.000604 rms=0.002311 Jy/beam
! Combined flux in latest and established models = 0.335929 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 77 components and 0.33593 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=8.78 mas, bpa=-3.958 degrees
! Estimated noise=1.11206 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000658948 Jy
! Component: 100  -  total flux cleaned = -0.000725073 Jy
! Component: 150  -  total flux cleaned = -0.000779629 Jy
! Component: 200  -  total flux cleaned = -0.000830064 Jy
! Total flux subtracted in 200 components = -0.000830064 Jy
! Clean residual min=-0.004510 max=0.006925 Jy/beam
! Clean residual mean=0.000324 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.335099 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.335099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128390Jy  sigma=1.016876
! Fit after  self-cal, rms=0.128366Jy  sigma=1.016696
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 18 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J2236-1433_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J2236-1433_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J2236-1433_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:38:45 2006