! Started logfile: J2129-1538_S_1997_01_11_pus_uve.log on Sun Feb  5 18:35:34 2006
obs J2129-1538_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J2129-1538_S_1997_01_11_pus_uva.fits
! AN table 1: 203 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.786864 visibilities/baseline/integration-bin.
! Found source: J2129-1538
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 28752 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.80171 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.307671Jy  sigma=3.485993
! Fit after  self-cal, rms=0.307162Jy  sigma=3.480984
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.978 mas, bmaj=8.403 mas, bpa=-2.464 degrees
! Estimated noise=1.89587 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.658119 Jy
! Component: 100  -  total flux cleaned = 0.753329 Jy
! Total flux subtracted in 100 components = 0.753329 Jy
! Clean residual min=-0.025728 max=0.028715 Jy/beam
! Clean residual mean=-0.000094 rms=0.007645 Jy/beam
! Combined flux in latest and established models = 0.753329 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.75333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206990Jy  sigma=2.003380
! Fit after  self-cal, rms=0.207175Jy  sigma=2.002354
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=10.22 mas, bpa=-3.366 degrees
! Estimated noise=1.30031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000968969 Jy
! Component: 100  -  total flux cleaned = -0.00244336 Jy
! Component: 150  -  total flux cleaned = -0.00353097 Jy
! Component: 200  -  total flux cleaned = -0.00396619 Jy
! Total flux subtracted in 200 components = -0.00396619 Jy
! Clean residual min=-0.018459 max=0.018343 Jy/beam
! Clean residual mean=0.000041 rms=0.005444 Jy/beam
! Combined flux in latest and established models = 0.749363 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.749363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202149Jy  sigma=1.958721
! Fit after  self-cal, rms=0.202137Jy  sigma=1.958845
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.832 x 10.22 at -3.366 degrees (North through East)
! Clean map  min=-0.017835  max=0.74983 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.0354
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.16     KP        0.87     
!   LA        0.99     MK        0.95     NL        0.75     OV        1.06     
!   PT        1.08     SC        0.83     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.979384
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.26     KP        0.98     
!   LA        1.08     MK        0.98     NL        0.87     OV        1.01     
!   PT        1.08     SC        0.85     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03351
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        1.08     KP        0.89     
!   LA        0.81     MK        0.87     NL        0.90     OV        0.90     
!   PT        1.27     SC        1.03     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.986145
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.22     KP        0.94     
!   LA        0.87     MK        0.98     NL        0.97     OV        1.02     
!   PT        1.15     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.202137Jy  sigma=1.958845
! Fit after  self-cal, rms=0.160049Jy  sigma=1.601315
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160049Jy  sigma=1.601315
! Fit after  self-cal, rms=0.160076Jy  sigma=1.601491
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.764 mas, bmaj=9.837 mas, bpa=-2.681 degrees
! Estimated noise=1.29832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167891 Jy
! Component: 100  -  total flux cleaned = 0.0183714 Jy
! Component: 150  -  total flux cleaned = 0.0181744 Jy
! Component: 200  -  total flux cleaned = 0.017816 Jy
! Total flux subtracted in 200 components = 0.017816 Jy
! Clean residual min=-0.008211 max=0.009302 Jy/beam
! Clean residual mean=0.000622 rms=0.002324 Jy/beam
! Combined flux in latest and established models = 0.767179 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.767179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158766Jy  sigma=1.585736
! Fit after  self-cal, rms=0.158779Jy  sigma=1.586003
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158779Jy  sigma=1.586003
! Fit after  self-cal, rms=0.123537Jy  sigma=1.174800
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, -50.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00965497 Jy
! Component: 100  -  total flux cleaned = 0.0113917 Jy
! Component: 150  -  total flux cleaned = 0.0118064 Jy
! Component: 200  -  total flux cleaned = 0.012138 Jy
! Total flux subtracted in 200 components = 0.012138 Jy
! Clean residual min=-0.007370 max=0.007232 Jy/beam
! Clean residual mean=0.000536 rms=0.001939 Jy/beam
! Combined flux in latest and established models = 0.779317 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.779317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122400Jy  sigma=1.163553
! Fit after  self-cal, rms=0.119849Jy  sigma=1.133939
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.764 x 9.837 at -2.681 degrees (North through East)
! Clean map  min=-0.0064997  max=0.76085 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119849Jy  sigma=1.133939
! Fit after  self-cal, rms=0.108327Jy  sigma=0.997768
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108327Jy  sigma=0.997768
! Fit after  self-cal, rms=0.108173Jy  sigma=0.994862
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=9.723 mas, bpa=-2.396 degrees
! Estimated noise=1.29281 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045519 Jy
! Component: 100  -  total flux cleaned = 0.00611525 Jy
! Component: 150  -  total flux cleaned = 0.00640537 Jy
! Component: 200  -  total flux cleaned = 0.00657401 Jy
! Total flux subtracted in 200 components = 0.00657401 Jy
! Clean residual min=-0.006758 max=0.005625 Jy/beam
! Clean residual mean=0.000107 rms=0.001513 Jy/beam
! Combined flux in latest and established models = 0.785892 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.785892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108008Jy  sigma=0.991746
! Fit after  self-cal, rms=0.108044Jy  sigma=0.991341
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108044Jy  sigma=0.991341
! Fit after  self-cal, rms=0.105590Jy  sigma=0.954943
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105590Jy  sigma=0.954943
! Fit after  self-cal, rms=0.105630Jy  sigma=0.954882
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=9.686 mas, bpa=-2.368 degrees
! Estimated noise=1.29436 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389097 Jy
! Component: 100  -  total flux cleaned = 0.00472059 Jy
! Component: 150  -  total flux cleaned = 0.0049524 Jy
! Component: 200  -  total flux cleaned = 0.00502112 Jy
! Total flux subtracted in 200 components = 0.00502112 Jy
! Clean residual min=-0.006685 max=0.005319 Jy/beam
! Clean residual mean=0.000115 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 0.790913 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 0.790913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105555Jy  sigma=0.953058
! Fit after  self-cal, rms=0.105571Jy  sigma=0.953035
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.392 mas, bmaj=15.54 mas, bpa=4.611 degrees
! Estimated noise=1.56406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000922138 Jy
! Component: 100  -  total flux cleaned = 0.00129197 Jy
! Component: 150  -  total flux cleaned = 0.00147178 Jy
! Component: 200  -  total flux cleaned = 0.00158096 Jy
! Total flux subtracted in 200 components = 0.00158096 Jy
! Clean residual min=-0.007236 max=0.006124 Jy/beam
! Clean residual mean=0.000178 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.792494 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 112 components and 0.792494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105618Jy  sigma=0.952769
! Fit after  self-cal, rms=0.105618Jy  sigma=0.952699
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.941 mas, bmaj=8.192 mas, bpa=-1.953 degrees
! Estimated noise=1.86276 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.653626 Jy
! Component: 100  -  total flux cleaned = 0.753612 Jy
! Component: 150  -  total flux cleaned = 0.776145 Jy
! Component: 200  -  total flux cleaned = 0.777432 Jy
! Total flux subtracted in 200 components = 0.777432 Jy
! Clean residual min=-0.007983 max=0.007271 Jy/beam
! Clean residual mean=0.000130 rms=0.002031 Jy/beam
! Combined flux in latest and established models = 0.777432 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.777432 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=9.686 mas, bpa=-2.368 degrees
! Estimated noise=1.29436 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00796284 Jy
! Component: 100  -  total flux cleaned = 0.0095375 Jy
! Component: 150  -  total flux cleaned = 0.0105565 Jy
! Component: 200  -  total flux cleaned = 0.0112285 Jy
! Total flux subtracted in 200 components = 0.0112285 Jy
! Clean residual min=-0.007132 max=0.005724 Jy/beam
! Clean residual mean=0.000142 rms=0.001509 Jy/beam
! Combined flux in latest and established models = 0.78866 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.78866 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.392 mas, bmaj=15.54 mas, bpa=4.611 degrees
! Estimated noise=1.56406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030923 Jy
! Component: 100  -  total flux cleaned = 0.00336205 Jy
! Component: 150  -  total flux cleaned = 0.00357692 Jy
! Component: 200  -  total flux cleaned = 0.00369448 Jy
! Total flux subtracted in 200 components = 0.00369448 Jy
! Clean residual min=-0.007189 max=0.006254 Jy/beam
! Clean residual mean=0.000178 rms=0.001883 Jy/beam
! Combined flux in latest and established models = 0.792354 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 71 components and 0.792354 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=9.686 mas, bpa=-2.368 degrees
! Estimated noise=1.29436 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000889876 Jy
! Component: 100  -  total flux cleaned = -0.000992775 Jy
! Component: 150  -  total flux cleaned = -0.000988522 Jy
! Component: 200  -  total flux cleaned = -0.00107973 Jy
! Total flux subtracted in 200 components = -0.00107973 Jy
! Clean residual min=-0.006935 max=0.005720 Jy/beam
! Clean residual mean=0.000106 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.791275 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 92 components and 0.791275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105857Jy  sigma=0.955860
! Fit after  self-cal, rms=0.105848Jy  sigma=0.955798
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J2129-1538_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J2129-1538_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J2129-1538_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:35:57 2006