! Started logfile: J1939-1525_S_1997_01_11_pus_uve.log on Sun Feb  5 18:30:18 2006
obs J1939-1525_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1939-1525_S_1997_01_11_pus_uva.fits
! AN table 1: 202 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891199 visibilities/baseline/integration-bin.
! Found source: J1939-1525
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 32404 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 384 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.739994 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.373201Jy  sigma=3.725896
! Fit after  self-cal, rms=0.370700Jy  sigma=3.707527
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.088 mas, bpa=-0.9743 degrees
! Estimated noise=2.42809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.597186 Jy
! Component: 100  -  total flux cleaned = 0.685789 Jy
! Total flux subtracted in 100 components = 0.685789 Jy
! Clean residual min=-0.023412 max=0.025098 Jy/beam
! Clean residual mean=-0.000235 rms=0.006855 Jy/beam
! Combined flux in latest and established models = 0.685789 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.685789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225120Jy  sigma=1.887880
! Fit after  self-cal, rms=0.225184Jy  sigma=1.887578
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.691 mas, bmaj=9.258 mas, bpa=-4.623 degrees
! Estimated noise=1.45635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116255 Jy
! Component: 100  -  total flux cleaned = 0.01166 Jy
! Component: 150  -  total flux cleaned = 0.0112289 Jy
! Component: 200  -  total flux cleaned = 0.0109014 Jy
! Total flux subtracted in 200 components = 0.0109014 Jy
! Clean residual min=-0.022772 max=0.017154 Jy/beam
! Clean residual mean=-0.000401 rms=0.005765 Jy/beam
! Combined flux in latest and established models = 0.69669 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.69669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222043Jy  sigma=1.857679
! Fit after  self-cal, rms=0.221967Jy  sigma=1.857416
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.691 x 9.258 at -4.623 degrees (North through East)
! Clean map  min=-0.022539  max=0.67559 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.03526
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        1.12     KP        0.87     
!   LA        1.00     MK        0.96     NL        0.75     OV        1.04     
!   PT        1.11     SC        0.85     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.982554
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        1.21     KP        0.98     
!   LA        1.08     MK        1.00     NL        0.85     OV        1.02     
!   PT        1.07     SC        0.88     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03373
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.00     HN        1.05     KP        0.90     
!   LA        0.82     MK        0.86     NL        0.90     OV        0.91     
!   PT        1.25     SC        1.07     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.990441
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        1.17     KP        0.94     
!   LA        0.87     MK        1.00     NL        0.95     OV        1.00     
!   PT        1.15     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.221967Jy  sigma=1.857416
! Fit after  self-cal, rms=0.191274Jy  sigma=1.629835
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191274Jy  sigma=1.629835
! Fit after  self-cal, rms=0.191308Jy  sigma=1.629720
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=8.989 mas, bpa=-3.583 degrees
! Estimated noise=1.4627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125589 Jy
! Component: 100  -  total flux cleaned = 0.013004 Jy
! Component: 150  -  total flux cleaned = 0.0130033 Jy
! Component: 200  -  total flux cleaned = 0.0130075 Jy
! Total flux subtracted in 200 components = 0.0130075 Jy
! Clean residual min=-0.008530 max=0.008465 Jy/beam
! Clean residual mean=0.000012 rms=0.002598 Jy/beam
! Combined flux in latest and established models = 0.709698 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.709698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190578Jy  sigma=1.621956
! Fit after  self-cal, rms=0.190527Jy  sigma=1.621821
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190527Jy  sigma=1.621821
! Fit after  self-cal, rms=0.136207Jy  sigma=1.093464
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00746921 Jy
! Component: 100  -  total flux cleaned = 0.00636979 Jy
! Component: 150  -  total flux cleaned = 0.0056782 Jy
! Component: 200  -  total flux cleaned = 0.00509474 Jy
! Total flux subtracted in 200 components = 0.00509474 Jy
! Clean residual min=-0.007948 max=0.008487 Jy/beam
! Clean residual mean=0.000006 rms=0.002381 Jy/beam
! Combined flux in latest and established models = 0.714793 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.714793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135021Jy  sigma=1.084434
! Fit after  self-cal, rms=0.131290Jy  sigma=1.049549
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.656 x 8.989 at -3.583 degrees (North through East)
! Clean map  min=-0.0079841  max=0.69903 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131290Jy  sigma=1.049549
! Fit after  self-cal, rms=0.120643Jy  sigma=0.947326
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120643Jy  sigma=0.947326
! Fit after  self-cal, rms=0.120316Jy  sigma=0.943867
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=8.938 mas, bpa=-3.067 degrees
! Estimated noise=1.45551 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140461 Jy
! Component: 100  -  total flux cleaned = 0.00158742 Jy
! Component: 150  -  total flux cleaned = 0.00163311 Jy
! Component: 200  -  total flux cleaned = 0.00167471 Jy
! Total flux subtracted in 200 components = 0.00167471 Jy
! Clean residual min=-0.006287 max=0.006644 Jy/beam
! Clean residual mean=0.000079 rms=0.001905 Jy/beam
! Combined flux in latest and established models = 0.716467 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.716467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120247Jy  sigma=0.943265
! Fit after  self-cal, rms=0.120209Jy  sigma=0.942795
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120209Jy  sigma=0.942795
! Fit after  self-cal, rms=0.117123Jy  sigma=0.908143
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117123Jy  sigma=0.908143
! Fit after  self-cal, rms=0.117146Jy  sigma=0.908044
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.922 mas, bpa=-2.978 degrees
! Estimated noise=1.4574 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189515 Jy
! Component: 100  -  total flux cleaned = 0.00207378 Jy
! Component: 150  -  total flux cleaned = 0.00210959 Jy
! Component: 200  -  total flux cleaned = 0.0021115 Jy
! Total flux subtracted in 200 components = 0.0021115 Jy
! Clean residual min=-0.006167 max=0.006433 Jy/beam
! Clean residual mean=0.000076 rms=0.001871 Jy/beam
! Combined flux in latest and established models = 0.718579 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.718579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117094Jy  sigma=0.907636
! Fit after  self-cal, rms=0.117109Jy  sigma=0.907601
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.658 mas, bmaj=15.3 mas, bpa=2.744 degrees
! Estimated noise=1.78361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000972388 Jy
! Component: 100  -  total flux cleaned = 0.000968845 Jy
! Component: 150  -  total flux cleaned = 0.000975012 Jy
! Component: 200  -  total flux cleaned = 0.00104274 Jy
! Total flux subtracted in 200 components = 0.00104274 Jy
! Clean residual min=-0.006878 max=0.007850 Jy/beam
! Clean residual mean=0.000143 rms=0.002700 Jy/beam
! Combined flux in latest and established models = 0.719622 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 62 components and 0.719622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117107Jy  sigma=0.907715
! Fit after  self-cal, rms=0.117110Jy  sigma=0.907697
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=6.964 mas, bpa=-0.2426 degrees
! Estimated noise=2.39167 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.603473 Jy
! Component: 100  -  total flux cleaned = 0.690029 Jy
! Component: 150  -  total flux cleaned = 0.707561 Jy
! Component: 200  -  total flux cleaned = 0.711014 Jy
! Total flux subtracted in 200 components = 0.711014 Jy
! Clean residual min=-0.008853 max=0.008835 Jy/beam
! Clean residual mean=-0.000034 rms=0.002365 Jy/beam
! Combined flux in latest and established models = 0.711014 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.711014 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.922 mas, bpa=-2.978 degrees
! Estimated noise=1.4574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -7).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00861981 Jy
! Component: 100  -  total flux cleaned = 0.00882262 Jy
! Component: 150  -  total flux cleaned = 0.00897713 Jy
! Component: 200  -  total flux cleaned = 0.00925368 Jy
! Total flux subtracted in 200 components = 0.00925368 Jy
! Clean residual min=-0.006314 max=0.005847 Jy/beam
! Clean residual mean=0.000074 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.720268 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 0.720268 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.658 mas, bmaj=15.3 mas, bpa=2.744 degrees
! Estimated noise=1.78361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249874 Jy
! Component: 100  -  total flux cleaned = 0.0026795 Jy
! Component: 150  -  total flux cleaned = 0.00283063 Jy
! Component: 200  -  total flux cleaned = 0.00289258 Jy
! Total flux subtracted in 200 components = 0.00289258 Jy
! Clean residual min=-0.006652 max=0.007108 Jy/beam
! Clean residual mean=0.000141 rms=0.002492 Jy/beam
! Combined flux in latest and established models = 0.72316 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.72316 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.922 mas, bpa=-2.978 degrees
! Estimated noise=1.4574 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000992842 Jy
! Component: 100  -  total flux cleaned = -0.00108539 Jy
! Component: 150  -  total flux cleaned = -0.00108073 Jy
! Component: 200  -  total flux cleaned = -0.00107814 Jy
! Total flux subtracted in 200 components = -0.00107814 Jy
! Clean residual min=-0.006089 max=0.005592 Jy/beam
! Clean residual mean=0.000076 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 0.722082 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.722082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116976Jy  sigma=0.905804
! Fit after  self-cal, rms=0.116962Jy  sigma=0.905568
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 6 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1939-1525_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1939-1525_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1939-1525_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:31:01 2006