! Started logfile: J1558-1409_S_1997_01_11_pus_uve.log on Sun Feb 5 18:17:49 2006 obs J1558-1409_S_1997_01_11_pus_uva.fits ! Reading UV FITS file: J1558-1409_S_1997_01_11_pus_uva.fits ! AN table 1: 271 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755228 visibilities/baseline/integration-bin. ! Found source: J1558-1409 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 606 lines of history. ! ! Reading 36840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 5 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=7 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. dev /xwindow ! Attempting to open device: '/xwindow' rflags="m3" radplot ! Overriding default options with user defined rflags="m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 84 buffered edits. tplot ! Using default options string "" ! Move the cursor into the plot window and press 'H' for help phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.4244 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 7 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.695091Jy sigma=8.041207 ! Fit after self-cal, rms=0.692629Jy sigma=8.032452 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=7.229 mas, bpa=-1.837 degrees ! Estimated noise=1.62082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.276731 Jy ! Component: 100 - total flux cleaned = 0.338425 Jy ! Total flux subtracted in 100 components = 0.338425 Jy ! Clean residual min=-0.035510 max=0.147232 Jy/beam ! Clean residual mean=0.000543 rms=0.012655 Jy/beam ! Combined flux in latest and established models = 0.338425 Jy ! Performing phase self-cal over 7 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.338425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236119Jy sigma=2.505192 ! Fit after self-cal, rms=0.235611Jy sigma=2.500982 ! Inverting map ! Added new window around map position (6, 2.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.133823 Jy ! Component: 100 - total flux cleaned = 0.145897 Jy ! Total flux subtracted in 100 components = 0.145897 Jy ! Clean residual min=-0.034688 max=0.074347 Jy/beam ! Clean residual mean=0.000081 rms=0.007975 Jy/beam ! Combined flux in latest and established models = 0.484322 Jy ! Performing phase self-cal over 7 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.484322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171675Jy sigma=1.774790 ! Fit after self-cal, rms=0.149725Jy sigma=1.502659 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395923 Jy ! Component: 100 - total flux cleaned = 0.041499 Jy ! Total flux subtracted in 100 components = 0.041499 Jy ! Clean residual min=-0.020259 max=0.028859 Jy/beam ! Clean residual mean=-0.000102 rms=0.005065 Jy/beam ! Combined flux in latest and established models = 0.525821 Jy ! Performing phase self-cal over 7 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.525821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137976Jy sigma=1.381854 ! Fit after self-cal, rms=0.135635Jy sigma=1.351738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=9.202 mas, bpa=-6.503 degrees ! Estimated noise=1.10604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141908 Jy ! Component: 100 - total flux cleaned = -0.00432066 Jy ! Component: 150 - total flux cleaned = -0.00529992 Jy ! Component: 200 - total flux cleaned = -0.00615009 Jy ! Total flux subtracted in 200 components = -0.00615009 Jy ! Clean residual min=-0.016875 max=0.013807 Jy/beam ! Clean residual mean=-0.000226 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.519671 Jy ! Performing phase self-cal over 7 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.519671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133301Jy sigma=1.326084 ! Fit after self-cal, rms=0.133107Jy sigma=1.323532 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.668 x 9.202 at -6.503 degrees (North through East) ! Clean map min=-0.015654 max=0.28658 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03207 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.10 KP 0.86 ! LA 0.97 MK 0.99 NL 0.83 OV 1.06 ! PT 1.07 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981822 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 1.18 KP 0.99 ! LA 1.08 MK 1.03 NL 0.91 OV 1.01 ! PT 1.02 SC 0.88 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02528 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.05 KP 0.87 ! LA 0.83 MK 0.90 NL 0.98 OV 0.93 ! PT 1.24 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.985218 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.13 KP 0.94 ! LA 0.88 MK 1.03 NL 0.98 OV 1.06 ! PT 1.12 SC 1.02 ! ! ! Fit before self-cal, rms=0.133107Jy sigma=1.323532 ! Fit after self-cal, rms=0.120190Jy sigma=1.204652 selfcal false, false, phase_soltime ! Performing phase self-cal over 7 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120190Jy sigma=1.204652 ! Fit after self-cal, rms=0.120135Jy sigma=1.204003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=8.883 mas, bpa=-5.215 degrees ! Estimated noise=1.10942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714896 Jy ! Component: 100 - total flux cleaned = 0.00803634 Jy ! Component: 150 - total flux cleaned = 0.00851963 Jy ! Component: 200 - total flux cleaned = 0.00910286 Jy ! Total flux subtracted in 200 components = 0.00910286 Jy ! Clean residual min=-0.009488 max=0.008493 Jy/beam ! Clean residual mean=-0.000126 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 0.528774 Jy ! Performing phase self-cal over 7 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.528774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119013Jy sigma=1.187648 ! Fit after self-cal, rms=0.118943Jy sigma=1.186264 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118943Jy sigma=1.186264 ! Fit after self-cal, rms=0.111442Jy sigma=1.083743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231883 Jy ! Component: 100 - total flux cleaned = 0.00265303 Jy ! Component: 150 - total flux cleaned = 0.00251456 Jy ! Component: 200 - total flux cleaned = 0.00251266 Jy ! Total flux subtracted in 200 components = 0.00251266 Jy ! Clean residual min=-0.008433 max=0.007883 Jy/beam ! Clean residual mean=-0.000137 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.531287 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.531286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111116Jy sigma=1.078840 ! Fit after self-cal, rms=0.111071Jy sigma=1.072953 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.668 x 8.883 at -5.215 degrees (North through East) ! Clean map min=-0.0079539 max=0.28958 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111071Jy sigma=1.072953 ! Fit after self-cal, rms=0.117616Jy sigma=0.985459 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117616Jy sigma=0.985459 ! Fit after self-cal, rms=0.117794Jy sigma=0.984904 ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=8.996 mas, bpa=-5.096 degrees ! Estimated noise=1.10522 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171602 Jy ! Component: 100 - total flux cleaned = 0.00172089 Jy ! Component: 150 - total flux cleaned = 0.00159445 Jy ! Component: 200 - total flux cleaned = 0.00147998 Jy ! Total flux subtracted in 200 components = 0.00147998 Jy ! Clean residual min=-0.004521 max=0.004822 Jy/beam ! Clean residual mean=0.000077 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.532766 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.532766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117595Jy sigma=0.981523 ! Fit after self-cal, rms=0.117637Jy sigma=0.981302 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117637Jy sigma=0.981302 ! Fit after self-cal, rms=0.117676Jy sigma=0.959048 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117676Jy sigma=0.959048 ! Fit after self-cal, rms=0.117716Jy sigma=0.959018 ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=8.98 mas, bpa=-4.977 degrees ! Estimated noise=1.10548 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138368 Jy ! Component: 100 - total flux cleaned = 0.00138677 Jy ! Component: 150 - total flux cleaned = 0.0012861 Jy ! Component: 200 - total flux cleaned = 0.00119637 Jy ! Total flux subtracted in 200 components = 0.00119637 Jy ! Clean residual min=-0.004415 max=0.004618 Jy/beam ! Clean residual mean=0.000062 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.533963 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.533963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117574Jy sigma=0.956767 ! Fit after self-cal, rms=0.117561Jy sigma=0.956630 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.821 mas, bmaj=14.02 mas, bpa=0.2253 degrees ! Estimated noise=1.34129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643539 Jy ! Component: 100 - total flux cleaned = 0.000710713 Jy ! Component: 150 - total flux cleaned = 0.000765885 Jy ! Component: 200 - total flux cleaned = 0.000766569 Jy ! Total flux subtracted in 200 components = 0.000766569 Jy ! Clean residual min=-0.004708 max=0.004448 Jy/beam ! Clean residual mean=0.000105 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.534729 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.534729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117534Jy sigma=0.956097 ! Fit after self-cal, rms=0.117524Jy sigma=0.955961 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.166 mas, bpa=-0.9556 degrees ! Estimated noise=1.62203 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.33662 Jy ! Component: 100 - total flux cleaned = 0.450502 Jy ! Component: 150 - total flux cleaned = 0.497993 Jy ! Component: 200 - total flux cleaned = 0.520697 Jy ! Total flux subtracted in 200 components = 0.520697 Jy ! Clean residual min=-0.008327 max=0.009828 Jy/beam ! Clean residual mean=0.000072 rms=0.002307 Jy/beam ! Combined flux in latest and established models = 0.520697 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.520698 Jy ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=8.98 mas, bpa=-4.977 degrees ! Estimated noise=1.10548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102833 Jy ! Component: 100 - total flux cleaned = 0.0118152 Jy ! Component: 150 - total flux cleaned = 0.0129739 Jy ! Component: 200 - total flux cleaned = 0.0134523 Jy ! Total flux subtracted in 200 components = 0.0134523 Jy ! Clean residual min=-0.004645 max=0.005131 Jy/beam ! Clean residual mean=0.000060 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.53415 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.53415 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.821 mas, bmaj=14.02 mas, bpa=0.2253 degrees ! Estimated noise=1.34129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287822 Jy ! Component: 100 - total flux cleaned = 0.00288461 Jy ! Component: 150 - total flux cleaned = 0.00288483 Jy ! Component: 200 - total flux cleaned = 0.00280619 Jy ! Total flux subtracted in 200 components = 0.00280619 Jy ! Clean residual min=-0.004638 max=0.003856 Jy/beam ! Clean residual mean=0.000078 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.536956 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.536956 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=8.98 mas, bpa=-4.977 degrees ! Estimated noise=1.10548 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141716 Jy ! Component: 100 - total flux cleaned = -0.00169768 Jy ! Component: 150 - total flux cleaned = -0.00170459 Jy ! Component: 200 - total flux cleaned = -0.00170244 Jy ! Total flux subtracted in 200 components = -0.00170244 Jy ! Clean residual min=-0.004198 max=0.004713 Jy/beam ! Clean residual mean=0.000051 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.535254 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.535254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117455Jy sigma=0.954130 ! Fit after self-cal, rms=0.117407Jy sigma=0.953666 dev /xwindow ! Attempting to open device: '/xwindow' rflags="m3" radplot ! Overriding default options with user defined rflags="m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 51 buffered edits. tplot ! Using default options string "" ! Move the cursor into the plot window and press 'H' for help rflags="m1-" radplot ! Overriding default options with user defined rflags="m1-" ! Move the cursor into the plot window and press 'H' for help ! Applying 4 buffered edits. vplot 3 ! Using default options string "efbm3" ! For help move the cursor into the plot window and press 'H'. rflags="m3" radplot ! Overriding default options with user defined rflags="m3" ! Move the cursor into the plot window and press 'H' for help uncal true,true ! uncal: All telescope phase corrections have been un-done. ! uncal: All telescope amplitude corrections have been un-done. wobs "J1558-1409_S_1997_01_11_pus\_uve.fits" ! Writing UV FITS file: J1558-1409_S_1997_01_11_pus_uve.fits print "* Congratulations, you are done!" ! * Congratulations, you are done! quit ! Quitting program ! Log file J1558-1409_S_1997_01_11_pus_uve.log closed on Sun Feb 5 18:18:47 2006