! Started logfile: J1513-1012_S_1997_01_11_pus_uve.log on Sun Feb  5 18:15:29 2006
obs J1513-1012_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1513-1012_S_1997_01_11_pus_uva.fits
! AN table 1: 202 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.909241 visibilities/baseline/integration-bin.
! Found source: J1513-1012
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 33060 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.489987 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.605857Jy  sigma=7.389503
! Fit after  self-cal, rms=0.574552Jy  sigma=7.173914
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.913 mas, bmaj=7.012 mas, bpa=-0.9634 degrees
! Estimated noise=1.71908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.373039 Jy
! Component: 100  -  total flux cleaned = 0.462626 Jy
! Total flux subtracted in 100 components = 0.462626 Jy
! Clean residual min=-0.020114 max=0.029990 Jy/beam
! Clean residual mean=-0.000071 rms=0.006406 Jy/beam
! Combined flux in latest and established models = 0.462626 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.462626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165345Jy  sigma=1.739352
! Fit after  self-cal, rms=0.165219Jy  sigma=1.736892
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.601 mas, bmaj=8.846 mas, bpa=-4.203 degrees
! Estimated noise=1.13281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, 0).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0509061 Jy
! Component: 100  -  total flux cleaned = 0.0679179 Jy
! Component: 150  -  total flux cleaned = 0.072147 Jy
! Component: 200  -  total flux cleaned = 0.0739206 Jy
! Total flux subtracted in 200 components = 0.0739206 Jy
! Clean residual min=-0.016344 max=0.019224 Jy/beam
! Clean residual mean=0.000108 rms=0.004265 Jy/beam
! Combined flux in latest and established models = 0.536546 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 44 components and 0.536546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150848Jy  sigma=1.549271
! Fit after  self-cal, rms=0.150345Jy  sigma=1.542939
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.601 x 8.846 at -4.203 degrees (North through East)
! Clean map  min=-0.016608  max=0.4438 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.03118
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.05     HN        1.11     KP        0.87     
!   LA        0.98     MK        1.00     NL        0.79     OV        1.07     
!   PT        1.03     SC        0.91     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.985626
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.14     KP        0.99     
!   LA        1.08     MK        1.04     NL        0.90     OV        1.03     
!   PT        1.02     SC        0.90     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.04433
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.01     HN        0.99     KP        0.89     
!   LA        0.81     MK        0.88     NL        0.93     OV        0.90     
!   PT        1.21     SC        1.05     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.999521
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.06     HN        1.13     KP        0.98     
!   LA        0.88     MK        1.04     NL        0.96     OV        0.99     
!   PT        1.08     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.150345Jy  sigma=1.542939
! Fit after  self-cal, rms=0.135106Jy  sigma=1.393208
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135106Jy  sigma=1.393208
! Fit after  self-cal, rms=0.135140Jy  sigma=1.392999
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.624 mas, bmaj=8.563 mas, bpa=-2.942 degrees
! Estimated noise=1.14132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.5, -0.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237463 Jy
! Component: 100  -  total flux cleaned = 0.0375122 Jy
! Component: 150  -  total flux cleaned = 0.0437436 Jy
! Component: 200  -  total flux cleaned = 0.0462202 Jy
! Total flux subtracted in 200 components = 0.0462202 Jy
! Clean residual min=-0.009455 max=0.010663 Jy/beam
! Clean residual mean=0.000030 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 0.582767 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 81 components and 0.582767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131188Jy  sigma=1.340111
! Fit after  self-cal, rms=0.130864Jy  sigma=1.335666
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130864Jy  sigma=1.335666
! Fit after  self-cal, rms=0.105955Jy  sigma=1.142947
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545003 Jy
! Component: 100  -  total flux cleaned = 0.00631324 Jy
! Component: 150  -  total flux cleaned = 0.00654685 Jy
! Component: 200  -  total flux cleaned = 0.00674713 Jy
! Total flux subtracted in 200 components = 0.00674713 Jy
! Clean residual min=-0.007056 max=0.007171 Jy/beam
! Clean residual mean=0.000020 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.589514 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 105 components and 0.589514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104921Jy  sigma=1.128715
! Fit after  self-cal, rms=0.104638Jy  sigma=1.123822
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.624 x 8.563 at -2.942 degrees (North through East)
! Clean map  min=-0.0082859  max=0.45316 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104638Jy  sigma=1.123822
! Fit after  self-cal, rms=0.100953Jy  sigma=1.031629
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100953Jy  sigma=1.031629
! Fit after  self-cal, rms=0.101011Jy  sigma=1.031259
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=8.608 mas, bpa=-2.835 degrees
! Estimated noise=1.13044 mJy/beam.
! Added new window around map position (21, 2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880673 Jy
! Component: 100  -  total flux cleaned = 0.0107942 Jy
! Component: 150  -  total flux cleaned = 0.0109694 Jy
! Component: 200  -  total flux cleaned = 0.0111194 Jy
! Total flux subtracted in 200 components = 0.0111194 Jy
! Clean residual min=-0.004418 max=0.004772 Jy/beam
! Clean residual mean=0.000049 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.600633 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.600633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100262Jy  sigma=1.020052
! Fit after  self-cal, rms=0.100238Jy  sigma=1.019411
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100238Jy  sigma=1.019411
! Fit after  self-cal, rms=0.098722Jy  sigma=0.979995
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098722Jy  sigma=0.979995
! Fit after  self-cal, rms=0.098730Jy  sigma=0.979974
! Inverting map and beam 
! Estimated beam: bmin=3.596 mas, bmaj=8.619 mas, bpa=-2.927 degrees
! Estimated noise=1.13221 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342746 Jy
! Component: 100  -  total flux cleaned = 0.00343557 Jy
! Component: 150  -  total flux cleaned = 0.00357081 Jy
! Component: 200  -  total flux cleaned = 0.00380657 Jy
! Total flux subtracted in 200 components = 0.00380657 Jy
! Clean residual min=-0.004072 max=0.004045 Jy/beam
! Clean residual mean=0.000055 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.60444 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 149 components and 0.60444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098508Jy  sigma=0.975321
! Fit after  self-cal, rms=0.098489Jy  sigma=0.975155
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.054 mas, bmaj=13.45 mas, bpa=3.96 degrees
! Estimated noise=1.3945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00073715 Jy
! Component: 100  -  total flux cleaned = 0.000600774 Jy
! Component: 150  -  total flux cleaned = 0.000417475 Jy
! Component: 200  -  total flux cleaned = 0.000194382 Jy
! Total flux subtracted in 200 components = 0.000194382 Jy
! Clean residual min=-0.003992 max=0.004374 Jy/beam
! Clean residual mean=0.000119 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.604634 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 161 components and 0.604634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098433Jy  sigma=0.974248
! Fit after  self-cal, rms=0.098433Jy  sigma=0.974131
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.916 mas, bmaj=6.989 mas, bpa=-0.472 degrees
! Estimated noise=1.69862 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.37456 Jy
! Component: 100  -  total flux cleaned = 0.463558 Jy
! Component: 150  -  total flux cleaned = 0.503955 Jy
! Component: 200  -  total flux cleaned = 0.528814 Jy
! Total flux subtracted in 200 components = 0.528814 Jy
! Clean residual min=-0.008729 max=0.010606 Jy/beam
! Clean residual mean=-0.000010 rms=0.002453 Jy/beam
! Combined flux in latest and established models = 0.528814 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.528813 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.596 mas, bmaj=8.619 mas, bpa=-2.927 degrees
! Estimated noise=1.13221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287563 Jy
! Component: 100  -  total flux cleaned = 0.0462805 Jy
! Component: 150  -  total flux cleaned = 0.057825 Jy
! Component: 200  -  total flux cleaned = 0.0646148 Jy
! Total flux subtracted in 200 components = 0.0646148 Jy
! Clean residual min=-0.004400 max=0.005298 Jy/beam
! Clean residual mean=0.000076 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 0.593428 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 73 components and 0.593429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.054 mas, bmaj=13.45 mas, bpa=3.96 degrees
! Estimated noise=1.3945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00763122 Jy
! Component: 100  -  total flux cleaned = 0.00932059 Jy
! Component: 150  -  total flux cleaned = 0.010029 Jy
! Component: 200  -  total flux cleaned = 0.0100311 Jy
! Total flux subtracted in 200 components = 0.0100311 Jy
! Clean residual min=-0.004353 max=0.004399 Jy/beam
! Clean residual mean=0.000120 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.60346 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 126 components and 0.60346 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.596 mas, bmaj=8.619 mas, bpa=-2.927 degrees
! Estimated noise=1.13221 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137575 Jy
! Component: 100  -  total flux cleaned = -0.00123981 Jy
! Component: 150  -  total flux cleaned = -0.00098705 Jy
! Component: 200  -  total flux cleaned = -0.000754014 Jy
! Total flux subtracted in 200 components = -0.000754014 Jy
! Clean residual min=-0.003938 max=0.004597 Jy/beam
! Clean residual mean=0.000060 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.602706 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 151 components and 0.602705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098986Jy  sigma=0.977350
! Fit after  self-cal, rms=0.098882Jy  sigma=0.976705
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 17 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 2 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1513-1012_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1513-1012_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1513-1012_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:16:18 2006