! Started logfile: J1445-1629_S_1997_01_11_pus_uvs.log on Sun Feb 5 19:36:03 2006 obs J1445-1629_S_1997_01_11_pus_uve.fits ! Reading UV FITS file: J1445-1629_S_1997_01_11_pus_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746914 visibilities/baseline/integration-bin. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 610 lines of history. ! ! Reading 2420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.5 float taper_size taper_size = 20. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709692Jy sigma=8.834819 ! Fit after self-cal, rms=0.704796Jy sigma=8.745160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.259 mas, bpa=-4.191 degrees ! Estimated noise=1.87026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222871 Jy ! Component: 100 - total flux cleaned = 0.278811 Jy ! Total flux subtracted in 100 components = 0.278811 Jy ! Clean residual min=-0.014003 max=0.023371 Jy/beam ! Clean residual mean=0.000058 rms=0.004475 Jy/beam ! Combined flux in latest and established models = 0.278811 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.278811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122355Jy sigma=1.315258 ! Fit after self-cal, rms=0.122285Jy sigma=1.314701 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=9.878 mas, bpa=-3.612 degrees ! Estimated noise=1.31973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354236 Jy ! Component: 100 - total flux cleaned = 0.0511296 Jy ! Component: 150 - total flux cleaned = 0.0573804 Jy ! Component: 200 - total flux cleaned = 0.0576342 Jy ! Total flux subtracted in 200 components = 0.0576342 Jy ! Clean residual min=-0.009951 max=0.010421 Jy/beam ! Clean residual mean=-0.000053 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.336445 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.336445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111826Jy sigma=1.189543 ! Fit after self-cal, rms=0.111715Jy sigma=1.188789 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 1.06 KP 0.86 ! LA 0.97 MK 0.94 NL 1.76 OV 1.05 ! PT 1.03 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.18 KP 1.04 ! LA 1.08 MK 0.97 NL 0.96 OV 0.98 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.10 KP 0.89 ! LA 0.82 MK 0.82 NL 1.08 OV 0.90 ! PT 1.23 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.08 HN 1.18 KP 0.95 ! LA 0.89 MK 0.99 NL 1.10 OV 1.04 ! PT 1.12 SC 1.02 ! ! ! Fit before self-cal, rms=0.111715Jy sigma=1.188789 ! Fit after self-cal, rms=0.106795Jy sigma=1.076683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=9.698 mas, bpa=-3.248 degrees ! Estimated noise=1.30178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167694 Jy ! Component: 100 - total flux cleaned = 0.00180671 Jy ! Component: 150 - total flux cleaned = 0.00160245 Jy ! Component: 200 - total flux cleaned = 0.00132424 Jy ! Total flux subtracted in 200 components = 0.00132424 Jy ! Clean residual min=-0.006740 max=0.007230 Jy/beam ! Clean residual mean=0.000019 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.337769 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.337769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106478Jy sigma=1.073492 ! Fit after self-cal, rms=0.106425Jy sigma=1.072867 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106425Jy sigma=1.072867 ! Fit after self-cal, rms=0.101888Jy sigma=1.009691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=9.753 mas, bpa=-3.108 degrees ! Estimated noise=1.30453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330505 Jy ! Component: 100 - total flux cleaned = -0.000417752 Jy ! Component: 150 - total flux cleaned = -0.000417209 Jy ! Component: 200 - total flux cleaned = -0.000415427 Jy ! Total flux subtracted in 200 components = -0.000415427 Jy ! Clean residual min=-0.005305 max=0.005002 Jy/beam ! Clean residual mean=-0.000002 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.337354 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.337354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101768Jy sigma=1.008256 ! Fit after self-cal, rms=0.101852Jy sigma=1.007905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169575 Jy ! Component: 100 - total flux cleaned = 0.000222731 Jy ! Component: 150 - total flux cleaned = 0.000224093 Jy ! Component: 200 - total flux cleaned = 0.000316437 Jy ! Total flux subtracted in 200 components = 0.000316437 Jy ! Clean residual min=-0.005230 max=0.004946 Jy/beam ! Clean residual mean=-0.000006 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.33767 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.33767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101798Jy sigma=1.007208 ! Fit after self-cal, rms=0.101793Jy sigma=1.007157 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101793Jy sigma=1.007157 ! Fit after self-cal, rms=0.101695Jy sigma=1.006809 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=9.755 mas, bpa=-2.993 degrees ! Estimated noise=1.30185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291916 Jy ! Component: 100 - total flux cleaned = -0.0002898 Jy ! Component: 150 - total flux cleaned = -0.000288222 Jy ! Component: 200 - total flux cleaned = -0.000242811 Jy ! Total flux subtracted in 200 components = -0.000242811 Jy ! Clean residual min=-0.005201 max=0.004643 Jy/beam ! Clean residual mean=-0.000011 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.337428 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.337428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101634Jy sigma=1.006178 ! Fit after self-cal, rms=0.101631Jy sigma=1.006152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30076e-05 Jy ! Component: 100 - total flux cleaned = -1.71219e-06 Jy ! Component: 150 - total flux cleaned = -1.35919e-06 Jy ! Component: 200 - total flux cleaned = 3.52048e-05 Jy ! Total flux subtracted in 200 components = 3.52048e-05 Jy ! Clean residual min=-0.005188 max=0.004560 Jy/beam ! Clean residual mean=-0.000012 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.337463 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.337463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101596Jy sigma=1.005751 ! Fit after self-cal, rms=0.101596Jy sigma=1.005721 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101596Jy sigma=1.005721 ! Fit after self-cal, rms=0.101393Jy sigma=1.005588 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.279 mas, bmaj=15.36 mas, bpa=3.513 degrees ! Estimated noise=1.58137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146136 Jy ! Component: 100 - total flux cleaned = -0.000137651 Jy ! Component: 150 - total flux cleaned = -0.000133407 Jy ! Component: 200 - total flux cleaned = -0.000132882 Jy ! Total flux subtracted in 200 components = -0.000132882 Jy ! Clean residual min=-0.004535 max=0.004160 Jy/beam ! Clean residual mean=-0.000023 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.33733 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.33733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101388Jy sigma=1.005678 ! Fit after self-cal, rms=0.101365Jy sigma=1.005358 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.66748e-05 Jy ! Component: 100 - total flux cleaned = -2.92083e-05 Jy ! Component: 150 - total flux cleaned = -4.71004e-06 Jy ! Component: 200 - total flux cleaned = -2.23456e-05 Jy ! Total flux subtracted in 200 components = -2.23456e-05 Jy ! Clean residual min=-0.004540 max=0.004169 Jy/beam ! Clean residual mean=-0.000023 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.337308 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.337307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101363Jy sigma=1.005466 ! Fit after self-cal, rms=0.101354Jy sigma=1.005261 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=9.75 mas, bpa=-2.89 degrees ! Estimated noise=1.29917 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.606 x 9.75 at -2.89 degrees (North through East) ! Clean map min=-0.0049911 max=0.29276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=8.187 mas, bpa=-3.69 degrees ! Estimated noise=1.87206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222977 Jy ! Component: 100 - total flux cleaned = 0.281543 Jy ! Component: 150 - total flux cleaned = 0.308455 Jy ! Component: 200 - total flux cleaned = 0.322279 Jy ! Total flux subtracted in 200 components = 0.322279 Jy ! Clean residual min=-0.007165 max=0.008672 Jy/beam ! Clean residual mean=0.000028 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.322279 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.322279 Jy ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=9.75 mas, bpa=-2.89 degrees ! Estimated noise=1.29917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104036 Jy ! Component: 100 - total flux cleaned = 0.0149194 Jy ! Component: 150 - total flux cleaned = 0.0157597 Jy ! Component: 200 - total flux cleaned = 0.0160335 Jy ! Total flux subtracted in 200 components = 0.0160335 Jy ! Clean residual min=-0.005475 max=0.004364 Jy/beam ! Clean residual mean=-0.000015 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.338312 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.338312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.279 mas, bmaj=15.36 mas, bpa=3.513 degrees ! Estimated noise=1.58137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000926954 Jy ! Component: 100 - total flux cleaned = 0.000616955 Jy ! Component: 150 - total flux cleaned = 0.000504749 Jy ! Component: 200 - total flux cleaned = 0.00039983 Jy ! Total flux subtracted in 200 components = 0.00039983 Jy ! Clean residual min=-0.004654 max=0.003510 Jy/beam ! Clean residual mean=-0.000036 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.338712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.4025e-05 Jy ! Component: 100 - total flux cleaned = -0.000183158 Jy ! Component: 150 - total flux cleaned = -0.000224126 Jy ! Component: 200 - total flux cleaned = -0.000264484 Jy ! Total flux subtracted in 200 components = -0.000264484 Jy ! Clean residual min=-0.004660 max=0.003548 Jy/beam ! Clean residual mean=-0.000034 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.338448 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.338448 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=9.75 mas, bpa=-2.89 degrees ! Estimated noise=1.29917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284759 Jy ! Component: 100 - total flux cleaned = 6.89865e-05 Jy ! Component: 150 - total flux cleaned = -2.86366e-05 Jy ! Component: 200 - total flux cleaned = -0.000117031 Jy ! Total flux subtracted in 200 components = -0.000117031 Jy ! Clean residual min=-0.005134 max=0.004175 Jy/beam ! Clean residual mean=-0.000020 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.338331 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.338331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101056Jy sigma=1.003520 ! Fit after self-cal, rms=0.101077Jy sigma=1.003335 wmodel J1445-1629_S_1997_01_11_pus_map.mod ! Writing 73 model components to file: J1445-1629_S_1997_01_11_pus_map.mod wobs J1445-1629_S_1997_01_11_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_1997_01_11_pus_uvs.fits wwins J1445-1629_S_1997_01_11_pus_map.win ! wwins: Wrote 2 windows to J1445-1629_S_1997_01_11_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102908 Jy ! Component: 100 - total flux cleaned = -0.00110459 Jy ! Component: 150 - total flux cleaned = -0.00116674 Jy ! Component: 200 - total flux cleaned = -0.0014053 Jy ! Component: 250 - total flux cleaned = -0.0016356 Jy ! Component: 300 - total flux cleaned = -0.00169106 Jy ! Component: 350 - total flux cleaned = -0.00185419 Jy ! Component: 400 - total flux cleaned = -0.00211859 Jy ! Component: 450 - total flux cleaned = -0.00237672 Jy ! Component: 500 - total flux cleaned = -0.00257916 Jy ! Component: 550 - total flux cleaned = -0.00287704 Jy ! Component: 600 - total flux cleaned = -0.00321676 Jy ! Component: 650 - total flux cleaned = -0.00350191 Jy ! Component: 700 - total flux cleaned = -0.00382794 Jy ! Component: 750 - total flux cleaned = -0.00401042 Jy ! Component: 800 - total flux cleaned = -0.00427957 Jy ! Component: 850 - total flux cleaned = -0.00454418 Jy ! Component: 900 - total flux cleaned = -0.00471817 Jy ! Component: 950 - total flux cleaned = -0.00488956 Jy ! Component: 1000 - total flux cleaned = -0.00518532 Jy ! Component: 1050 - total flux cleaned = -0.00526835 Jy ! Component: 1100 - total flux cleaned = -0.00543232 Jy ! Component: 1150 - total flux cleaned = -0.00551272 Jy ! Component: 1200 - total flux cleaned = -0.00559336 Jy ! Component: 1250 - total flux cleaned = -0.00579107 Jy ! Component: 1300 - total flux cleaned = -0.00598572 Jy ! Component: 1350 - total flux cleaned = -0.00606272 Jy ! Component: 1400 - total flux cleaned = -0.0062522 Jy ! Component: 1450 - total flux cleaned = -0.00628949 Jy ! Component: 1500 - total flux cleaned = -0.00636431 Jy ! Component: 1550 - total flux cleaned = -0.00647473 Jy ! Component: 1600 - total flux cleaned = -0.00654813 Jy ! Component: 1650 - total flux cleaned = -0.00665574 Jy ! Component: 1700 - total flux cleaned = -0.00669132 Jy ! Component: 1750 - total flux cleaned = -0.00686663 Jy ! Component: 1800 - total flux cleaned = -0.0069008 Jy ! Component: 1850 - total flux cleaned = -0.00683161 Jy ! Component: 1900 - total flux cleaned = -0.00693341 Jy ! Component: 1950 - total flux cleaned = -0.00686593 Jy ! Component: 2000 - total flux cleaned = -0.00686597 Jy ! Total flux subtracted in 2048 components = -0.00689859 Jy ! Clean residual min=-0.001967 max=0.001763 Jy/beam ! Clean residual mean=-0.000007 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.331432 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 209 components and 0.331432 Jy wmap "J1445-1629_S_1997_01_11_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.606 x 9.75 at -2.89 degrees (North through East) ! Clean map min=-0.0035697 max=0.29296 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_1997_01_11_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.292956 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701158 device "J1445-1629_S_1997_01_11_pus\_map.eps/VPS" ! Attempting to open device: 'J1445-1629_S_1997_01_11_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.718018 0.718018 1.43604 2.87207 5.74414 11.4883 22.9766 45.9532 91.9063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.292 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.606 x 9.75 at -2.89 degrees (North through East) ! Clean map min=-0.0035697 max=0.29296 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1445-1629_S_1997_01_11_pus\_map.gif/vgif" ! Attempting to open device: 'J1445-1629_S_1997_01_11_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1445-1629_S_1997_01_11_pus_uvs.log closed on Sun Feb 5 19:36:38 2006