! Started logfile: J1445-1629_S_1997_01_11_pus_uve.log on Sun Feb  5 18:13:14 2006
obs J1445-1629_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1445-1629_S_1997_01_11_pus_uva.fits
! AN table 1: 199 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.734003 visibilities/baseline/integration-bin.
! Found source: J1445-1629
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 26292 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 34 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.32867 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.709895Jy  sigma=8.822665
! Fit after  self-cal, rms=0.708532Jy  sigma=8.803623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=8.264 mas, bpa=-4.197 degrees
! Estimated noise=1.86584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.246109 Jy
! Component: 100  -  total flux cleaned = 0.295464 Jy
! Total flux subtracted in 100 components = 0.295464 Jy
! Clean residual min=-0.013024 max=0.020816 Jy/beam
! Clean residual mean=0.000028 rms=0.004080 Jy/beam
! Combined flux in latest and established models = 0.295464 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.295464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124428Jy  sigma=1.349194
! Fit after  self-cal, rms=0.124256Jy  sigma=1.348378
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=10.32 mas, bpa=-5.362 degrees
! Estimated noise=1.25326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -5.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0294372 Jy
! Component: 100  -  total flux cleaned = 0.0346581 Jy
! Component: 150  -  total flux cleaned = 0.0350603 Jy
! Component: 200  -  total flux cleaned = 0.0347821 Jy
! Total flux subtracted in 200 components = 0.0347821 Jy
! Clean residual min=-0.009737 max=0.010883 Jy/beam
! Clean residual mean=-0.000053 rms=0.002602 Jy/beam
! Combined flux in latest and established models = 0.330247 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.330247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118739Jy  sigma=1.278073
! Fit after  self-cal, rms=0.118446Jy  sigma=1.275955
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.656 x 10.32 at -5.362 degrees (North through East)
! Clean map  min=-0.0093306  max=0.29029 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.957045
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.04     HN        1.06     KP        0.85     
!   LA        1.00     MK        0.95     NL        1.76     OV        1.05     
!   PT        1.02     SC        0.81     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.993976
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.07     HN        1.14     KP        1.04     
!   LA        1.07     MK        0.99     NL        0.93     OV        0.97     
!   PT        0.98     SC        0.91     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03083
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        1.06     KP        0.89     
!   LA        0.82     MK        0.84     NL        1.05     OV        0.89     
!   PT        1.22     SC        1.02     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.981001
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.14     KP        0.95     
!   LA        0.88     MK        1.01     NL        1.08     OV        1.03     
!   PT        1.11     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.118446Jy  sigma=1.275955
! Fit after  self-cal, rms=0.111388Jy  sigma=1.204823
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111388Jy  sigma=1.204823
! Fit after  self-cal, rms=0.111389Jy  sigma=1.204708
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=9.939 mas, bpa=-4.489 degrees
! Estimated noise=1.20377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229784 Jy
! Component: 100  -  total flux cleaned = -0.00232547 Jy
! Component: 150  -  total flux cleaned = -0.00191305 Jy
! Component: 200  -  total flux cleaned = -0.00191786 Jy
! Total flux subtracted in 200 components = -0.00191786 Jy
! Clean residual min=-0.006242 max=0.007036 Jy/beam
! Clean residual mean=-0.000001 rms=0.001811 Jy/beam
! Combined flux in latest and established models = 0.328329 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 65 components and 0.328329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111117Jy  sigma=1.197038
! Fit after  self-cal, rms=0.111024Jy  sigma=1.196766
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111024Jy  sigma=1.196766
! Fit after  self-cal, rms=0.106437Jy  sigma=1.102755
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214935 Jy
! Component: 100  -  total flux cleaned = 0.00271248 Jy
! Component: 150  -  total flux cleaned = 0.00271193 Jy
! Component: 200  -  total flux cleaned = 0.00270808 Jy
! Total flux subtracted in 200 components = 0.00270808 Jy
! Clean residual min=-0.005795 max=0.006506 Jy/beam
! Clean residual mean=-0.000006 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 0.331037 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.331037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106185Jy  sigma=1.100301
! Fit after  self-cal, rms=0.106173Jy  sigma=1.095060
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.606 x 9.939 at -4.489 degrees (North through East)
! Clean map  min=-0.0055993  max=0.28326 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106173Jy  sigma=1.095060
! Fit after  self-cal, rms=0.104638Jy  sigma=1.016936
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104638Jy  sigma=1.016936
! Fit after  self-cal, rms=0.104847Jy  sigma=1.015951
! Inverting map and beam 
! Estimated beam: bmin=3.624 mas, bmaj=9.962 mas, bpa=-4.163 degrees
! Estimated noise=1.19634 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000456042 Jy
! Component: 100  -  total flux cleaned = -0.000269753 Jy
! Component: 150  -  total flux cleaned = -0.000183456 Jy
! Component: 200  -  total flux cleaned = -0.000107411 Jy
! Total flux subtracted in 200 components = -0.000107411 Jy
! Clean residual min=-0.004082 max=0.003999 Jy/beam
! Clean residual mean=-0.000026 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.330929 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.330929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104748Jy  sigma=1.013918
! Fit after  self-cal, rms=0.104805Jy  sigma=1.013646
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104805Jy  sigma=1.013646
! Fit after  self-cal, rms=0.118393Jy  sigma=0.980672
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118393Jy  sigma=0.980672
! Fit after  self-cal, rms=0.118685Jy  sigma=0.980320
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=9.979 mas, bpa=-4.197 degrees
! Estimated noise=1.20483 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107147 Jy
! Component: 100  -  total flux cleaned = 0.00136593 Jy
! Component: 150  -  total flux cleaned = 0.00144741 Jy
! Component: 200  -  total flux cleaned = 0.00152131 Jy
! Total flux subtracted in 200 components = 0.00152131 Jy
! Clean residual min=-0.004064 max=0.004100 Jy/beam
! Clean residual mean=0.000007 rms=0.001021 Jy/beam
! Combined flux in latest and established models = 0.332451 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 122 components and 0.332451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118628Jy  sigma=0.978194
! Fit after  self-cal, rms=0.118722Jy  sigma=0.978058
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.412 mas, bmaj=15.66 mas, bpa=3.768 degrees
! Estimated noise=1.48184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016757 Jy
! Component: 100  -  total flux cleaned = 0.000214379 Jy
! Component: 150  -  total flux cleaned = 0.000181311 Jy
! Component: 200  -  total flux cleaned = 0.000153615 Jy
! Total flux subtracted in 200 components = 0.000153615 Jy
! Clean residual min=-0.004079 max=0.003941 Jy/beam
! Clean residual mean=0.000009 rms=0.001108 Jy/beam
! Combined flux in latest and established models = 0.332604 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 136 components and 0.332604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118762Jy  sigma=0.977857
! Fit after  self-cal, rms=0.118723Jy  sigma=0.977633
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=8.182 mas, bpa=-3.616 degrees
! Estimated noise=1.82692 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.243297 Jy
! Component: 100  -  total flux cleaned = 0.294343 Jy
! Component: 150  -  total flux cleaned = 0.314581 Jy
! Component: 200  -  total flux cleaned = 0.322404 Jy
! Total flux subtracted in 200 components = 0.322404 Jy
! Clean residual min=-0.006279 max=0.006702 Jy/beam
! Clean residual mean=0.000033 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.322404 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.322404 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=9.979 mas, bpa=-4.197 degrees
! Estimated noise=1.20483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00849609 Jy
! Component: 100  -  total flux cleaned = 0.0101368 Jy
! Component: 150  -  total flux cleaned = 0.0105307 Jy
! Component: 200  -  total flux cleaned = 0.0105377 Jy
! Total flux subtracted in 200 components = 0.0105377 Jy
! Clean residual min=-0.004385 max=0.004037 Jy/beam
! Clean residual mean=0.000006 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.332942 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 57 components and 0.332942 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.412 mas, bmaj=15.66 mas, bpa=3.768 degrees
! Estimated noise=1.48184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000958076 Jy
! Component: 100  -  total flux cleaned = 0.000731819 Jy
! Component: 150  -  total flux cleaned = 0.000666072 Jy
! Component: 200  -  total flux cleaned = 0.000490024 Jy
! Total flux subtracted in 200 components = 0.000490024 Jy
! Clean residual min=-0.004016 max=0.004021 Jy/beam
! Clean residual mean=0.000005 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.333432 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 80 components and 0.333432 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=9.979 mas, bpa=-4.197 degrees
! Estimated noise=1.20483 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000754922 Jy
! Component: 100  -  total flux cleaned = -0.000993204 Jy
! Component: 150  -  total flux cleaned = -0.000989127 Jy
! Component: 200  -  total flux cleaned = -0.00108921 Jy
! Total flux subtracted in 200 components = -0.00108921 Jy
! Clean residual min=-0.004028 max=0.003905 Jy/beam
! Clean residual mean=0.000007 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.332343 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 95 components and 0.332343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118653Jy  sigma=0.977205
! Fit after  self-cal, rms=0.118667Jy  sigma=0.976901
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 5 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 2 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1445-1629_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1445-1629_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1445-1629_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:13:48 2006