! Started logfile: J1404-0130_S_1997_01_11_pus_uvs.log on Sun Feb 5 19:33:03 2006 obs J1404-0130_S_1997_01_11_pus_uve.fits ! Reading UV FITS file: J1404-0130_S_1997_01_11_pus_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.830864 visibilities/baseline/integration-bin. ! Found source: J1404-0130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 610 lines of history. ! ! Reading 2692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.5 float taper_size taper_size = 20. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.650325Jy sigma=8.949532 ! Fit after self-cal, rms=0.647455Jy sigma=8.918021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.147 mas, bpa=-5.549 degrees ! Estimated noise=1.63702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267945 Jy ! Component: 100 - total flux cleaned = 0.350808 Jy ! Total flux subtracted in 100 components = 0.350808 Jy ! Clean residual min=-0.014073 max=0.034192 Jy/beam ! Clean residual mean=-0.000018 rms=0.004610 Jy/beam ! Combined flux in latest and established models = 0.350808 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.350808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120040Jy sigma=1.344084 ! Fit after self-cal, rms=0.120036Jy sigma=1.343374 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350085 Jy ! Component: 100 - total flux cleaned = 0.0383633 Jy ! Total flux subtracted in 100 components = 0.0383633 Jy ! Clean residual min=-0.014339 max=0.016528 Jy/beam ! Clean residual mean=-0.000049 rms=0.003511 Jy/beam ! Combined flux in latest and established models = 0.389171 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.389171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109195Jy sigma=1.233026 ! Fit after self-cal, rms=0.109204Jy sigma=1.232664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=8.271 mas, bpa=-5.777 degrees ! Estimated noise=1.12352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 62). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847298 Jy ! Component: 100 - total flux cleaned = 0.00808968 Jy ! Component: 150 - total flux cleaned = 0.00747165 Jy ! Component: 200 - total flux cleaned = 0.00748173 Jy ! Total flux subtracted in 200 components = 0.00748173 Jy ! Clean residual min=-0.008714 max=0.013742 Jy/beam ! Clean residual mean=-0.000160 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 0.396653 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.396653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105927Jy sigma=1.200835 ! Fit after self-cal, rms=0.105825Jy sigma=1.199356 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.05 KP 0.87 ! LA 0.99 MK 0.96 NL 0.77 OV 1.08 ! PT 1.01 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 1.19 KP 0.98 ! LA 1.12 MK 0.99 NL 0.89 OV 1.01 ! PT 1.02 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.09 KP 0.89 ! LA 0.85 MK 0.84 NL 0.96 OV 0.92 ! PT 1.25 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.15 KP 1.03 ! LA 0.88 MK 1.04 NL 0.98 OV 1.02 ! PT 1.09 SC 1.03 ! ! ! Fit before self-cal, rms=0.105825Jy sigma=1.199356 ! Fit after self-cal, rms=0.090402Jy sigma=1.029079 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.136 mas, bpa=-5.415 degrees ! Estimated noise=1.11232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00429674 Jy ! Component: 100 - total flux cleaned = -0.00462373 Jy ! Component: 150 - total flux cleaned = -0.00498185 Jy ! Component: 200 - total flux cleaned = -0.00514047 Jy ! Total flux subtracted in 200 components = -0.00514047 Jy ! Clean residual min=-0.004934 max=0.004712 Jy/beam ! Clean residual mean=-0.000077 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.391512 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.391512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090071Jy sigma=1.024282 ! Fit after self-cal, rms=0.090039Jy sigma=1.023622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090039Jy sigma=1.023622 ! Fit after self-cal, rms=0.090026Jy sigma=1.006398 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=8.131 mas, bpa=-5.423 degrees ! Estimated noise=1.11455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95523e-05 Jy ! Component: 100 - total flux cleaned = -0.000101235 Jy ! Component: 150 - total flux cleaned = -0.000172905 Jy ! Component: 200 - total flux cleaned = -0.000238364 Jy ! Total flux subtracted in 200 components = -0.000238364 Jy ! Clean residual min=-0.005048 max=0.004211 Jy/beam ! Clean residual mean=-0.000038 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.391274 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.391274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089886Jy sigma=1.004987 ! Fit after self-cal, rms=0.089893Jy sigma=1.004913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468985 Jy ! Component: 100 - total flux cleaned = -0.000413308 Jy ! Component: 150 - total flux cleaned = -0.000468464 Jy ! Component: 200 - total flux cleaned = -0.000416761 Jy ! Total flux subtracted in 200 components = -0.000416761 Jy ! Clean residual min=-0.005001 max=0.004050 Jy/beam ! Clean residual mean=-0.000038 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.390857 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.390857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089819Jy sigma=1.004259 ! Fit after self-cal, rms=0.089817Jy sigma=1.004251 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089817Jy sigma=1.004251 ! Fit after self-cal, rms=0.089802Jy sigma=1.003885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=8.123 mas, bpa=-5.5 degrees ! Estimated noise=1.11462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679544 Jy ! Component: 100 - total flux cleaned = 0.000673582 Jy ! Component: 150 - total flux cleaned = 0.000776834 Jy ! Component: 200 - total flux cleaned = 0.000826404 Jy ! Total flux subtracted in 200 components = 0.000826404 Jy ! Clean residual min=-0.004945 max=0.004010 Jy/beam ! Clean residual mean=-0.000036 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.391684 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.391684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089717Jy sigma=1.003169 ! Fit after self-cal, rms=0.089719Jy sigma=1.003152 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108391 Jy ! Component: 100 - total flux cleaned = -0.000107864 Jy ! Component: 150 - total flux cleaned = -0.000106837 Jy ! Component: 200 - total flux cleaned = -6.34632e-05 Jy ! Total flux subtracted in 200 components = -6.34632e-05 Jy ! Clean residual min=-0.004901 max=0.003945 Jy/beam ! Clean residual mean=-0.000036 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.39162 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.39162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089676Jy sigma=1.002692 ! Fit after self-cal, rms=0.089675Jy sigma=1.002679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089675Jy sigma=1.002679 ! Fit after self-cal, rms=0.089645Jy sigma=1.002425 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.79 mas, bmaj=12.22 mas, bpa=-0.8258 degrees ! Estimated noise=1.38823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020754 Jy ! Component: 100 - total flux cleaned = 0.00249505 Jy ! Component: 150 - total flux cleaned = 0.00252759 Jy ! Component: 200 - total flux cleaned = 0.00258921 Jy ! Total flux subtracted in 200 components = 0.00258921 Jy ! Clean residual min=-0.004364 max=0.003541 Jy/beam ! Clean residual mean=-0.000089 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.39421 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.39421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089671Jy sigma=1.002201 ! Fit after self-cal, rms=0.089643Jy sigma=1.002113 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457739 Jy ! Component: 100 - total flux cleaned = 0.000514329 Jy ! Component: 150 - total flux cleaned = 0.000541132 Jy ! Component: 200 - total flux cleaned = 0.000591839 Jy ! Total flux subtracted in 200 components = 0.000591839 Jy ! Clean residual min=-0.004418 max=0.003508 Jy/beam ! Clean residual mean=-0.000094 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.394801 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.394801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089651Jy sigma=1.002038 ! Fit after self-cal, rms=0.089645Jy sigma=1.002030 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.115 mas, bpa=-5.56 degrees ! Estimated noise=1.11457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 8.115 at -5.56 degrees (North through East) ! Clean map min=-0.004583 max=0.34873 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=7.03 mas, bpa=-5.072 degrees ! Estimated noise=1.62291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265801 Jy ! Component: 100 - total flux cleaned = 0.349071 Jy ! Component: 150 - total flux cleaned = 0.384367 Jy ! Component: 200 - total flux cleaned = 0.397114 Jy ! Total flux subtracted in 200 components = 0.397114 Jy ! Clean residual min=-0.007936 max=0.007808 Jy/beam ! Clean residual mean=0.000001 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.397114 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.397114 Jy ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.115 mas, bpa=-5.56 degrees ! Estimated noise=1.11457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831336 Jy ! Component: 100 - total flux cleaned = -0.00133658 Jy ! Component: 150 - total flux cleaned = -0.00196091 Jy ! Component: 200 - total flux cleaned = -0.00213287 Jy ! Total flux subtracted in 200 components = -0.00213287 Jy ! Clean residual min=-0.005286 max=0.004039 Jy/beam ! Clean residual mean=-0.000058 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.394981 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.394981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.79 mas, bmaj=12.22 mas, bpa=-0.8258 degrees ! Estimated noise=1.38823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220181 Jy ! Component: 100 - total flux cleaned = 0.00197212 Jy ! Component: 150 - total flux cleaned = 0.00163703 Jy ! Component: 200 - total flux cleaned = 0.0013401 Jy ! Total flux subtracted in 200 components = 0.0013401 Jy ! Clean residual min=-0.005216 max=0.003357 Jy/beam ! Clean residual mean=-0.000108 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.396322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162622 Jy ! Component: 100 - total flux cleaned = -0.000364076 Jy ! Component: 150 - total flux cleaned = -0.000549396 Jy ! Component: 200 - total flux cleaned = -0.000679694 Jy ! Total flux subtracted in 200 components = -0.000679694 Jy ! Clean residual min=-0.005057 max=0.003352 Jy/beam ! Clean residual mean=-0.000101 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.395642 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 0.395642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.115 mas, bpa=-5.56 degrees ! Estimated noise=1.11457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000578378 Jy ! Component: 100 - total flux cleaned = -0.000767088 Jy ! Component: 150 - total flux cleaned = -0.000936677 Jy ! Component: 200 - total flux cleaned = -0.00116773 Jy ! Total flux subtracted in 200 components = -0.00116773 Jy ! Clean residual min=-0.005008 max=0.003735 Jy/beam ! Clean residual mean=-0.000044 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.394474 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.394474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089744Jy sigma=1.001990 ! Fit after self-cal, rms=0.089759Jy sigma=1.001895 wmodel J1404-0130_S_1997_01_11_pus_map.mod ! Writing 65 model components to file: J1404-0130_S_1997_01_11_pus_map.mod wobs J1404-0130_S_1997_01_11_pus_uvs.fits ! Writing UV FITS file: J1404-0130_S_1997_01_11_pus_uvs.fits wwins J1404-0130_S_1997_01_11_pus_map.win ! wwins: Wrote 2 windows to J1404-0130_S_1997_01_11_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013758 Jy ! Component: 100 - total flux cleaned = -0.00116812 Jy ! Component: 150 - total flux cleaned = -0.000910807 Jy ! Component: 200 - total flux cleaned = -0.000725864 Jy ! Component: 250 - total flux cleaned = -0.000725769 Jy ! Component: 300 - total flux cleaned = -0.000896329 Jy ! Component: 350 - total flux cleaned = -0.00116914 Jy ! Component: 400 - total flux cleaned = -0.00132639 Jy ! Component: 450 - total flux cleaned = -0.00127406 Jy ! Component: 500 - total flux cleaned = -0.00122439 Jy ! Component: 550 - total flux cleaned = -0.00132154 Jy ! Component: 600 - total flux cleaned = -0.00136865 Jy ! Component: 650 - total flux cleaned = -0.00132402 Jy ! Component: 700 - total flux cleaned = -0.00145975 Jy ! Component: 750 - total flux cleaned = -0.00150455 Jy ! Component: 800 - total flux cleaned = -0.00146175 Jy ! Component: 850 - total flux cleaned = -0.00141951 Jy ! Component: 900 - total flux cleaned = -0.00137787 Jy ! Component: 950 - total flux cleaned = -0.00137722 Jy ! Component: 1000 - total flux cleaned = -0.00137713 Jy ! Component: 1050 - total flux cleaned = -0.00141611 Jy ! Component: 1100 - total flux cleaned = -0.00137693 Jy ! Component: 1150 - total flux cleaned = -0.00137611 Jy ! Component: 1200 - total flux cleaned = -0.00122643 Jy ! Component: 1250 - total flux cleaned = -0.00126397 Jy ! Component: 1300 - total flux cleaned = -0.00122723 Jy ! Component: 1350 - total flux cleaned = -0.0012265 Jy ! Component: 1400 - total flux cleaned = -0.00111952 Jy ! Component: 1450 - total flux cleaned = -0.00101393 Jy ! Component: 1500 - total flux cleaned = -0.000979941 Jy ! Component: 1550 - total flux cleaned = -0.00101442 Jy ! Component: 1600 - total flux cleaned = -0.000845096 Jy ! Component: 1650 - total flux cleaned = -0.000745313 Jy ! Component: 1700 - total flux cleaned = -0.000712675 Jy ! Component: 1750 - total flux cleaned = -0.00064728 Jy ! Component: 1800 - total flux cleaned = -0.000485427 Jy ! Component: 1850 - total flux cleaned = -0.000453638 Jy ! Component: 1900 - total flux cleaned = -0.000358242 Jy ! Component: 1950 - total flux cleaned = -0.000264172 Jy ! Component: 2000 - total flux cleaned = -0.00023309 Jy ! Total flux subtracted in 2048 components = -0.000171517 Jy ! Clean residual min=-0.001668 max=0.001992 Jy/beam ! Clean residual mean=-0.000008 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.394303 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 179 components and 0.394302 Jy wmap "J1404-0130_S_1997_01_11_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 8.115 at -5.56 degrees (North through East) ! Clean map min=-0.0043376 max=0.34925 Jy/beam ! Writing clean map to FITS file: J1404-0130_S_1997_01_11_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.349248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000609467 device "J1404-0130_S_1997_01_11_pus\_map.eps/VPS" ! Attempting to open device: 'J1404-0130_S_1997_01_11_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.523525 0.523525 1.04705 2.0941 4.1882 8.3764 16.7528 33.5056 67.0112 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.349 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 8.115 at -5.56 degrees (North through East) ! Clean map min=-0.0043376 max=0.34925 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1404-0130_S_1997_01_11_pus\_map.gif/vgif" ! Attempting to open device: 'J1404-0130_S_1997_01_11_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1404-0130_S_1997_01_11_pus_uvs.log closed on Sun Feb 5 19:33:38 2006