! Started logfile: J1404-0130_S_1997_01_11_pus_uve.log on Sun Feb  5 18:09:32 2006
obs J1404-0130_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1404-0130_S_1997_01_11_pus_uva.fits
! AN table 1: 202 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.853575 visibilities/baseline/integration-bin.
! Found source: J1404-0130
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 31036 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 155 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.386793 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.651010Jy  sigma=8.947729
! Fit after  self-cal, rms=0.649804Jy  sigma=8.937212
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.897 mas, bmaj=7.15 mas, bpa=-5.517 degrees
! Estimated noise=1.67857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.303675 Jy
! Component: 100  -  total flux cleaned = 0.376195 Jy
! Total flux subtracted in 100 components = 0.376195 Jy
! Clean residual min=-0.013600 max=0.019337 Jy/beam
! Clean residual mean=-0.000037 rms=0.003882 Jy/beam
! Combined flux in latest and established models = 0.376195 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.376195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117630Jy  sigma=1.327129
! Fit after  self-cal, rms=0.117605Jy  sigma=1.326402
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=8.799 mas, bpa=-7.803 degrees
! Estimated noise=1.06118 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00547008 Jy
! Component: 100  -  total flux cleaned = 0.00492787 Jy
! Component: 150  -  total flux cleaned = 0.0045137 Jy
! Component: 200  -  total flux cleaned = 0.00420923 Jy
! Total flux subtracted in 200 components = 0.00420923 Jy
! Clean residual min=-0.008704 max=0.012835 Jy/beam
! Clean residual mean=-0.000124 rms=0.002638 Jy/beam
! Combined flux in latest and established models = 0.380405 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.380405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112795Jy  sigma=1.279379
! Fit after  self-cal, rms=0.112757Jy  sigma=1.279220
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.588 x 8.799 at -7.803 degrees (North through East)
! Clean map  min=-0.0084998  max=0.34547 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.05245
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.05     KP        0.86     
!   LA        0.98     MK        0.95     NL        0.78     OV        1.07     
!   PT        1.02     SC        0.83     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.992608
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.19     KP        0.96     
!   LA        1.11     MK        0.98     NL        0.87     OV        0.99     
!   PT        1.04     SC        0.87     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03294
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.00     HN        1.09     KP        0.88     
!   LA        0.84     MK        0.84     NL        0.94     OV        0.90     
!   PT        1.26     SC        1.03     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.983523
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.16     KP        1.01     
!   LA        0.87     MK        1.03     NL        0.97     OV        1.00     
!   PT        1.10     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.112757Jy  sigma=1.279220
! Fit after  self-cal, rms=0.100075Jy  sigma=1.147213
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100075Jy  sigma=1.147213
! Fit after  self-cal, rms=0.100068Jy  sigma=1.147159
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.551 mas, bmaj=8.477 mas, bpa=-7.241 degrees
! Estimated noise=1.07284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00993619 Jy
! Component: 100  -  total flux cleaned = 0.012568 Jy
! Component: 150  -  total flux cleaned = 0.0131075 Jy
! Component: 200  -  total flux cleaned = 0.0131793 Jy
! Total flux subtracted in 200 components = 0.0131793 Jy
! Clean residual min=-0.006159 max=0.005150 Jy/beam
! Clean residual mean=-0.000054 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.393584 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.393584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099336Jy  sigma=1.136862
! Fit after  self-cal, rms=0.099317Jy  sigma=1.136812
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099317Jy  sigma=1.136812
! Fit after  self-cal, rms=0.094478Jy  sigma=1.065819
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101029 Jy
! Component: 100  -  total flux cleaned = 0.001075 Jy
! Component: 150  -  total flux cleaned = 0.00101903 Jy
! Component: 200  -  total flux cleaned = 0.00102038 Jy
! Total flux subtracted in 200 components = 0.00102038 Jy
! Clean residual min=-0.005980 max=0.004951 Jy/beam
! Clean residual mean=-0.000057 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.394604 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.394604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094396Jy  sigma=1.064901
! Fit after  self-cal, rms=0.094303Jy  sigma=1.061316
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.551 x 8.477 at -7.241 degrees (North through East)
! Clean map  min=-0.0057101  max=0.35282 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094303Jy  sigma=1.061316
! Fit after  self-cal, rms=0.091948Jy  sigma=1.008110
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091948Jy  sigma=1.008110
! Fit after  self-cal, rms=0.091978Jy  sigma=1.007808
! Inverting map and beam 
! Estimated beam: bmin=3.533 mas, bmaj=8.415 mas, bpa=-6.964 degrees
! Estimated noise=1.0687 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150072 Jy
! Component: 100  -  total flux cleaned = 0.00156722 Jy
! Component: 150  -  total flux cleaned = 0.00163032 Jy
! Component: 200  -  total flux cleaned = 0.00169029 Jy
! Total flux subtracted in 200 components = 0.00169029 Jy
! Clean residual min=-0.006066 max=0.004196 Jy/beam
! Clean residual mean=-0.000029 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.396294 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.396295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091934Jy  sigma=1.006676
! Fit after  self-cal, rms=0.091950Jy  sigma=1.006634
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091950Jy  sigma=1.006634
! Fit after  self-cal, rms=0.089744Jy  sigma=0.966579
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089744Jy  sigma=0.966579
! Fit after  self-cal, rms=0.089748Jy  sigma=0.966547
! Inverting map and beam 
! Estimated beam: bmin=3.529 mas, bmaj=8.396 mas, bpa=-6.846 degrees
! Estimated noise=1.07205 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255872 Jy
! Component: 100  -  total flux cleaned = 0.00273294 Jy
! Component: 150  -  total flux cleaned = 0.00278498 Jy
! Component: 200  -  total flux cleaned = 0.00283067 Jy
! Total flux subtracted in 200 components = 0.00283067 Jy
! Clean residual min=-0.005712 max=0.003954 Jy/beam
! Clean residual mean=-0.000036 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.399125 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.399125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089684Jy  sigma=0.965461
! Fit after  self-cal, rms=0.089685Jy  sigma=0.965454
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.925 mas, bmaj=12.3 mas, bpa=-0.1537 degrees
! Estimated noise=1.34389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140132 Jy
! Component: 100  -  total flux cleaned = 0.00156544 Jy
! Component: 150  -  total flux cleaned = 0.00167048 Jy
! Component: 200  -  total flux cleaned = 0.00179609 Jy
! Total flux subtracted in 200 components = 0.00179609 Jy
! Clean residual min=-0.004622 max=0.003621 Jy/beam
! Clean residual mean=-0.000091 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.400921 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.400921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089717Jy  sigma=0.965710
! Fit after  self-cal, rms=0.089710Jy  sigma=0.965662
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.884 mas, bmaj=7.003 mas, bpa=-4.691 degrees
! Estimated noise=1.68527 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.30579 Jy
! Component: 100  -  total flux cleaned = 0.378766 Jy
! Component: 150  -  total flux cleaned = 0.400753 Jy
! Component: 200  -  total flux cleaned = 0.401437 Jy
! Total flux subtracted in 200 components = 0.401437 Jy
! Clean residual min=-0.007304 max=0.007130 Jy/beam
! Clean residual mean=0.000010 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.401437 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.401437 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.529 mas, bmaj=8.396 mas, bpa=-6.846 degrees
! Estimated noise=1.07205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372756 Jy
! Component: 100  -  total flux cleaned = 6.52732e-05 Jy
! Component: 150  -  total flux cleaned = -0.000188124 Jy
! Component: 200  -  total flux cleaned = -0.000617158 Jy
! Total flux subtracted in 200 components = -0.000617158 Jy
! Clean residual min=-0.005800 max=0.003933 Jy/beam
! Clean residual mean=-0.000044 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.40082 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.40082 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.925 mas, bmaj=12.3 mas, bpa=-0.1537 degrees
! Estimated noise=1.34389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705891 Jy
! Component: 100  -  total flux cleaned = 0.00059143 Jy
! Component: 150  -  total flux cleaned = 0.000536356 Jy
! Component: 200  -  total flux cleaned = 0.000559759 Jy
! Total flux subtracted in 200 components = 0.000559759 Jy
! Clean residual min=-0.004761 max=0.003618 Jy/beam
! Clean residual mean=-0.000095 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.40138 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.40138 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.529 mas, bmaj=8.396 mas, bpa=-6.846 degrees
! Estimated noise=1.07205 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000402759 Jy
! Component: 100  -  total flux cleaned = -0.00064118 Jy
! Component: 150  -  total flux cleaned = -0.00098488 Jy
! Component: 200  -  total flux cleaned = -0.00122901 Jy
! Total flux subtracted in 200 components = -0.00122901 Jy
! Clean residual min=-0.005706 max=0.003765 Jy/beam
! Clean residual mean=-0.000040 rms=0.001058 Jy/beam
! Combined flux in latest and established models = 0.400151 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.400151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089703Jy  sigma=0.965013
! Fit after  self-cal, rms=0.089698Jy  sigma=0.965000
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 1 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 3 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1404-0130_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1404-0130_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1404-0130_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:10:12 2006