! Started logfile: J1305-1033_S_1997_01_11_pus_uve.log on Sun Feb  5 18:05:49 2006
obs J1305-1033_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1305-1033_S_1997_01_11_pus_uva.fits
! AN table 1: 203 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.792994 visibilities/baseline/integration-bin.
! Found source: J1305-1033
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 28976 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 105 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.898771 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.225889Jy  sigma=2.979487
! Fit after  self-cal, rms=0.225719Jy  sigma=2.976816
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=7.693 mas, bpa=-0.8643 degrees
! Estimated noise=1.759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.750476 Jy
! Component: 100  -  total flux cleaned = 0.833715 Jy
! Total flux subtracted in 100 components = 0.833715 Jy
! Clean residual min=-0.035319 max=0.035763 Jy/beam
! Clean residual mean=-0.000178 rms=0.008092 Jy/beam
! Combined flux in latest and established models = 0.833715 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.833715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189050Jy  sigma=2.051696
! Fit after  self-cal, rms=0.189043Jy  sigma=2.051519
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=9.879 mas, bpa=-4.008 degrees
! Estimated noise=1.16257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0137156 Jy
! Component: 100  -  total flux cleaned = -0.0147074 Jy
! Component: 150  -  total flux cleaned = -0.0163578 Jy
! Component: 200  -  total flux cleaned = -0.0181791 Jy
! Total flux subtracted in 200 components = -0.0181791 Jy
! Clean residual min=-0.016645 max=0.018021 Jy/beam
! Clean residual mean=-0.000346 rms=0.005575 Jy/beam
! Combined flux in latest and established models = 0.815536 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.815536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176726Jy  sigma=1.940186
! Fit after  self-cal, rms=0.176695Jy  sigma=1.940152
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.792 x 9.879 at -4.008 degrees (North through East)
! Clean map  min=-0.016217  max=0.84761 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.04329
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.12     KP        0.86     
!   LA        0.98     MK        0.96     NL        0.79     OV        1.05     
!   PT        1.05     SC        0.81     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.989981
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.20     KP        0.97     
!   LA        1.07     MK        1.00     NL        0.87     OV        1.02     
!   PT        1.03     SC        0.86     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03392
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.08     KP        0.89     
!   LA        0.81     MK        0.88     NL        0.91     OV        0.91     
!   PT        1.22     SC        1.02     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.979732
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.08     HN        1.19     KP        0.96     
!   LA        0.87     MK        1.01     NL        0.98     OV        1.04     
!   PT        1.13     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.176695Jy  sigma=1.940152
! Fit after  self-cal, rms=0.122677Jy  sigma=1.411212
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122677Jy  sigma=1.411212
! Fit after  self-cal, rms=0.122674Jy  sigma=1.411089
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.748 mas, bmaj=9.479 mas, bpa=-2.868 degrees
! Estimated noise=1.16912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177289 Jy
! Component: 100  -  total flux cleaned = 0.0225798 Jy
! Component: 150  -  total flux cleaned = 0.0232661 Jy
! Component: 200  -  total flux cleaned = 0.0235491 Jy
! Total flux subtracted in 200 components = 0.0235491 Jy
! Clean residual min=-0.006362 max=0.006588 Jy/beam
! Clean residual mean=-0.000039 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.839085 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 26 components and 0.839085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120546Jy  sigma=1.386010
! Fit after  self-cal, rms=0.120490Jy  sigma=1.385932
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120490Jy  sigma=1.385932
! Fit after  self-cal, rms=0.105799Jy  sigma=1.187146
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000286897 Jy
! Component: 100  -  total flux cleaned = 0.000431953 Jy
! Component: 150  -  total flux cleaned = 0.000647579 Jy
! Component: 200  -  total flux cleaned = 0.000651272 Jy
! Total flux subtracted in 200 components = 0.000651272 Jy
! Clean residual min=-0.006171 max=0.006014 Jy/beam
! Clean residual mean=-0.000030 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.839736 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.839736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105525Jy  sigma=1.184413
! Fit after  self-cal, rms=0.104833Jy  sigma=1.174962
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.748 x 9.479 at -2.868 degrees (North through East)
! Clean map  min=-0.0058093  max=0.86033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104833Jy  sigma=1.174962
! Fit after  self-cal, rms=0.090899Jy  sigma=0.989556
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090899Jy  sigma=0.989556
! Fit after  self-cal, rms=0.090877Jy  sigma=0.988822
! Inverting map and beam 
! Estimated beam: bmin=3.754 mas, bmaj=9.446 mas, bpa=-2.652 degrees
! Estimated noise=1.16723 mJy/beam.
! Added new window around map position (2, 13.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539746 Jy
! Component: 100  -  total flux cleaned = 0.00581661 Jy
! Component: 150  -  total flux cleaned = 0.00615025 Jy
! Component: 200  -  total flux cleaned = 0.00635133 Jy
! Total flux subtracted in 200 components = 0.00635133 Jy
! Clean residual min=-0.004299 max=0.004408 Jy/beam
! Clean residual mean=0.000049 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.846087 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 45 components and 0.846087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090481Jy  sigma=0.983504
! Fit after  self-cal, rms=0.090478Jy  sigma=0.983236
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090478Jy  sigma=0.983236
! Fit after  self-cal, rms=0.088362Jy  sigma=0.952547
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088362Jy  sigma=0.952547
! Fit after  self-cal, rms=0.088362Jy  sigma=0.952537
! Inverting map and beam 
! Estimated beam: bmin=3.753 mas, bmaj=9.421 mas, bpa=-2.54 degrees
! Estimated noise=1.16934 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362167 Jy
! Component: 100  -  total flux cleaned = 0.00391976 Jy
! Component: 150  -  total flux cleaned = 0.0041731 Jy
! Component: 200  -  total flux cleaned = 0.00432407 Jy
! Total flux subtracted in 200 components = 0.00432407 Jy
! Clean residual min=-0.003997 max=0.003957 Jy/beam
! Clean residual mean=0.000066 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.850411 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 53 components and 0.850411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088168Jy  sigma=0.949907
! Fit after  self-cal, rms=0.088171Jy  sigma=0.949836
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.142 mas, bmaj=14.26 mas, bpa=2.906 degrees
! Estimated noise=1.41243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125568 Jy
! Component: 100  -  total flux cleaned = 0.00130756 Jy
! Component: 150  -  total flux cleaned = 0.00140075 Jy
! Component: 200  -  total flux cleaned = 0.00152672 Jy
! Total flux subtracted in 200 components = 0.00152672 Jy
! Clean residual min=-0.004057 max=0.004064 Jy/beam
! Clean residual mean=0.000109 rms=0.001349 Jy/beam
! Combined flux in latest and established models = 0.851938 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 79 components and 0.851938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088148Jy  sigma=0.949542
! Fit after  self-cal, rms=0.088143Jy  sigma=0.949471
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.9 mas, bmaj=7.534 mas, bpa=-0.07248 degrees
! Estimated noise=1.74768 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.74795 Jy
! Component: 100  -  total flux cleaned = 0.853566 Jy
! Component: 150  -  total flux cleaned = 0.855759 Jy
! Component: 200  -  total flux cleaned = 0.854821 Jy
! Total flux subtracted in 200 components = 0.854821 Jy
! Clean residual min=-0.009992 max=0.009271 Jy/beam
! Clean residual mean=0.000051 rms=0.002160 Jy/beam
! Combined flux in latest and established models = 0.854821 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.854821 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.753 mas, bmaj=9.421 mas, bpa=-2.54 degrees
! Estimated noise=1.16934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00294575 Jy
! Component: 100  -  total flux cleaned = -0.00391509 Jy
! Component: 150  -  total flux cleaned = -0.00339597 Jy
! Component: 200  -  total flux cleaned = -0.00297769 Jy
! Total flux subtracted in 200 components = -0.00297769 Jy
! Clean residual min=-0.004123 max=0.004683 Jy/beam
! Clean residual mean=0.000056 rms=0.001205 Jy/beam
! Combined flux in latest and established models = 0.851843 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.851843 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.142 mas, bmaj=14.26 mas, bpa=2.906 degrees
! Estimated noise=1.41243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698279 Jy
! Component: 100  -  total flux cleaned = 0.000622137 Jy
! Component: 150  -  total flux cleaned = 0.000748928 Jy
! Component: 200  -  total flux cleaned = 0.000803922 Jy
! Total flux subtracted in 200 components = 0.000803922 Jy
! Clean residual min=-0.004075 max=0.004183 Jy/beam
! Clean residual mean=0.000099 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.852647 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.852647 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.753 mas, bmaj=9.421 mas, bpa=-2.54 degrees
! Estimated noise=1.16934 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000692832 Jy
! Component: 100  -  total flux cleaned = -0.000706353 Jy
! Component: 150  -  total flux cleaned = -0.000713164 Jy
! Component: 200  -  total flux cleaned = -0.000825174 Jy
! Total flux subtracted in 200 components = -0.000825174 Jy
! Clean residual min=-0.003538 max=0.004274 Jy/beam
! Clean residual mean=0.000056 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.851822 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.851822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088348Jy  sigma=0.951750
! Fit after  self-cal, rms=0.088344Jy  sigma=0.951703
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 2 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1305-1033_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1305-1033_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1305-1033_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:06:29 2006