! Started logfile: J1215-1731_S_1997_01_11_pus_uve.log on Sun Feb  5 18:02:18 2006
obs J1215-1731_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1215-1731_S_1997_01_11_pus_uva.fits
! AN table 1: 206 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.778641 visibilities/baseline/integration-bin.
! Found source: J1215-1731
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 28872 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 16 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.793156 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.298434Jy  sigma=3.767868
! Fit after  self-cal, rms=0.297930Jy  sigma=3.763470
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.751 mas, bmaj=6.777 mas, bpa=-4.96 degrees
! Estimated noise=2.08143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.641003 Jy
! Component: 100  -  total flux cleaned = 0.732707 Jy
! Total flux subtracted in 100 components = 0.732707 Jy
! Clean residual min=-0.029584 max=0.050304 Jy/beam
! Clean residual mean=0.001253 rms=0.008712 Jy/beam
! Combined flux in latest and established models = 0.732707 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.732708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193001Jy  sigma=2.096876
! Fit after  self-cal, rms=0.193018Jy  sigma=2.096706
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.747 mas, bmaj=9.096 mas, bpa=-5.448 degrees
! Estimated noise=1.24513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -3.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0711333 Jy
! Component: 100  -  total flux cleaned = 0.100968 Jy
! Component: 150  -  total flux cleaned = 0.109039 Jy
! Component: 200  -  total flux cleaned = 0.112037 Jy
! Total flux subtracted in 200 components = 0.112037 Jy
! Clean residual min=-0.022459 max=0.026001 Jy/beam
! Clean residual mean=0.001516 rms=0.007119 Jy/beam
! Combined flux in latest and established models = 0.844745 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.844745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169394Jy  sigma=1.802415
! Fit after  self-cal, rms=0.167676Jy  sigma=1.776818
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.747 x 9.096 at -5.448 degrees (North through East)
! Clean map  min=-0.023063  max=0.742 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.02058
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.05     HN        1.18     KP        0.86     
!   LA        0.98     MK        0.99     NL        0.85     OV        1.09     
!   PT        1.03     SC        0.85     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.985613
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.11     HN        1.23     KP        0.98     
!   LA        1.06     MK        1.01     NL        0.89     OV        1.03     
!   PT        1.01     SC        0.88     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03333
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.04     HN        1.08     KP        0.88     
!   LA        0.81     MK        0.89     NL        0.95     OV        0.90     
!   PT        1.20     SC        1.04     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.989599
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.08     HN        1.16     KP        0.94     
!   LA        0.88     MK        0.99     NL        1.00     OV        1.03     
!   PT        1.10     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.167676Jy  sigma=1.776818
! Fit after  self-cal, rms=0.126724Jy  sigma=1.345462
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126724Jy  sigma=1.345462
! Fit after  self-cal, rms=0.126743Jy  sigma=1.345445
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.738 mas, bmaj=8.794 mas, bpa=-4.455 degrees
! Estimated noise=1.23564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200478 Jy
! Component: 100  -  total flux cleaned = 0.028822 Jy
! Component: 150  -  total flux cleaned = 0.0299997 Jy
! Component: 200  -  total flux cleaned = 0.0310219 Jy
! Total flux subtracted in 200 components = 0.0310219 Jy
! Clean residual min=-0.012028 max=0.017757 Jy/beam
! Clean residual mean=0.000904 rms=0.003977 Jy/beam
! Combined flux in latest and established models = 0.875767 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 66 components and 0.875767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124082Jy  sigma=1.308880
! Fit after  self-cal, rms=0.123952Jy  sigma=1.306775
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123952Jy  sigma=1.306775
! Fit after  self-cal, rms=0.114112Jy  sigma=1.192119
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396059 Jy
! Component: 100  -  total flux cleaned = 0.00375066 Jy
! Component: 150  -  total flux cleaned = 0.00355931 Jy
! Component: 200  -  total flux cleaned = 0.00338153 Jy
! Total flux subtracted in 200 components = 0.00338153 Jy
! Clean residual min=-0.011230 max=0.017424 Jy/beam
! Clean residual mean=0.000867 rms=0.003896 Jy/beam
! Combined flux in latest and established models = 0.879149 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 84 components and 0.879149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113378Jy  sigma=1.183374
! Fit after  self-cal, rms=0.112677Jy  sigma=1.177664
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.738 x 8.794 at -4.455 degrees (North through East)
! Clean map  min=-0.011157  max=0.74155 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112677Jy  sigma=1.177664
! Fit after  self-cal, rms=0.104573Jy  sigma=1.071896
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104573Jy  sigma=1.071896
! Fit after  self-cal, rms=0.104352Jy  sigma=1.071356
! Inverting map and beam 
! Estimated beam: bmin=3.712 mas, bmaj=8.793 mas, bpa=-4.213 degrees
! Estimated noise=1.22947 mJy/beam.
! Added new window around map position (20.5, -6.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215588 Jy
! Component: 100  -  total flux cleaned = 0.0326538 Jy
! Component: 150  -  total flux cleaned = 0.0403407 Jy
! Component: 200  -  total flux cleaned = 0.0434044 Jy
! Total flux subtracted in 200 components = 0.0434044 Jy
! Clean residual min=-0.007140 max=0.007909 Jy/beam
! Clean residual mean=-0.000061 rms=0.002046 Jy/beam
! Combined flux in latest and established models = 0.922553 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 57 model components to the UV plane model.
! The established model now contains 140 components and 0.922553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100972Jy  sigma=1.017809
! Fit after  self-cal, rms=0.100701Jy  sigma=1.014727
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100701Jy  sigma=1.014727
! Fit after  self-cal, rms=0.099355Jy  sigma=0.988692
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099355Jy  sigma=0.988692
! Fit after  self-cal, rms=0.099293Jy  sigma=0.988632
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=8.779 mas, bpa=-4.176 degrees
! Estimated noise=1.2268 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00763584 Jy
! Component: 100  -  total flux cleaned = 0.0129934 Jy
! Component: 150  -  total flux cleaned = 0.0158503 Jy
! Component: 200  -  total flux cleaned = 0.0168337 Jy
! Total flux subtracted in 200 components = 0.0168337 Jy
! Clean residual min=-0.005920 max=0.006419 Jy/beam
! Clean residual mean=-0.000040 rms=0.001758 Jy/beam
! Combined flux in latest and established models = 0.939387 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 162 components and 0.939387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098625Jy  sigma=0.979330
! Fit after  self-cal, rms=0.098552Jy  sigma=0.978738
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.281 mas, bmaj=15.23 mas, bpa=4.812 degrees
! Estimated noise=1.49826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034967 Jy
! Component: 100  -  total flux cleaned = 0.00441823 Jy
! Component: 150  -  total flux cleaned = 0.00495334 Jy
! Component: 200  -  total flux cleaned = 0.0050406 Jy
! Total flux subtracted in 200 components = 0.0050406 Jy
! Clean residual min=-0.007054 max=0.005967 Jy/beam
! Clean residual mean=-0.000200 rms=0.002187 Jy/beam
! Combined flux in latest and established models = 0.944427 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 183 components and 0.944427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098449Jy  sigma=0.977043
! Fit after  self-cal, rms=0.098409Jy  sigma=0.976687
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.732 mas, bmaj=6.656 mas, bpa=-4.225 degrees
! Estimated noise=2.03991 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.629778 Jy
! Component: 100  -  total flux cleaned = 0.729435 Jy
! Component: 150  -  total flux cleaned = 0.778462 Jy
! Component: 200  -  total flux cleaned = 0.809942 Jy
! Total flux subtracted in 200 components = 0.809942 Jy
! Clean residual min=-0.010933 max=0.014014 Jy/beam
! Clean residual mean=0.000590 rms=0.003586 Jy/beam
! Combined flux in latest and established models = 0.809942 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.809942 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=8.779 mas, bpa=-4.176 degrees
! Estimated noise=1.2268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386199 Jy
! Component: 100  -  total flux cleaned = 0.0636071 Jy
! Component: 150  -  total flux cleaned = 0.0820162 Jy
! Component: 200  -  total flux cleaned = 0.0958279 Jy
! Total flux subtracted in 200 components = 0.0958279 Jy
! Clean residual min=-0.008020 max=0.008688 Jy/beam
! Clean residual mean=0.000414 rms=0.002480 Jy/beam
! Combined flux in latest and established models = 0.90577 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 91 components and 0.90577 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.281 mas, bmaj=15.23 mas, bpa=4.812 degrees
! Estimated noise=1.49826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154642 Jy
! Component: 100  -  total flux cleaned = 0.0249551 Jy
! Component: 150  -  total flux cleaned = 0.0312588 Jy
! Component: 200  -  total flux cleaned = 0.0338487 Jy
! Total flux subtracted in 200 components = 0.0338487 Jy
! Clean residual min=-0.007402 max=0.006602 Jy/beam
! Clean residual mean=-0.000070 rms=0.002298 Jy/beam
! Combined flux in latest and established models = 0.939618 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 143 components and 0.939619 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=8.779 mas, bpa=-4.176 degrees
! Estimated noise=1.2268 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164588 Jy
! Component: 100  -  total flux cleaned = 0.000548162 Jy
! Component: 150  -  total flux cleaned = 0.0010458 Jy
! Component: 200  -  total flux cleaned = 0.00149231 Jy
! Total flux subtracted in 200 components = 0.00149231 Jy
! Clean residual min=-0.006154 max=0.006916 Jy/beam
! Clean residual mean=-0.000063 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 0.941111 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 162 components and 0.941111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098752Jy  sigma=0.980592
! Fit after  self-cal, rms=0.098660Jy  sigma=0.978650
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 12 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 2 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1215-1731_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1215-1731_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1215-1731_S_1997_01_11_pus_uve.log closed on Sun Feb  5 18:02:57 2006