! Started logfile: J1048-1909_S_1997_01_11_pus_uve.log on Sun Feb  5 17:57:05 2006
obs J1048-1909_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1048-1909_S_1997_01_11_pus_uva.fits
! AN table 1: 201 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.760088 visibilities/baseline/integration-bin.
! Found source: J1048-1909
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 27500 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.525957 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.521435Jy  sigma=6.377599
! Fit after  self-cal, rms=0.521189Jy  sigma=6.375211
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.889 mas, bmaj=8.226 mas, bpa=-5.786 degrees
! Estimated noise=2.0801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.424746 Jy
! Component: 100  -  total flux cleaned = 0.488091 Jy
! Total flux subtracted in 100 components = 0.488091 Jy
! Clean residual min=-0.018754 max=0.038689 Jy/beam
! Clean residual mean=0.000202 rms=0.006087 Jy/beam
! Combined flux in latest and established models = 0.488091 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.488091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155154Jy  sigma=1.546125
! Fit after  self-cal, rms=0.155070Jy  sigma=1.544215
! Inverting map 
! Added new window around map position (4, -6).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.040884 Jy
! Component: 100  -  total flux cleaned = 0.0515271 Jy
! Total flux subtracted in 100 components = 0.0515271 Jy
! Clean residual min=-0.016218 max=0.020015 Jy/beam
! Clean residual mean=-0.000033 rms=0.004952 Jy/beam
! Combined flux in latest and established models = 0.539618 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.539618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146299Jy  sigma=1.458607
! Fit after  self-cal, rms=0.145284Jy  sigma=1.446048
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=10.3 mas, bpa=-6.319 degrees
! Estimated noise=1.28554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00394015 Jy
! Component: 100  -  total flux cleaned = -0.00568337 Jy
! Component: 150  -  total flux cleaned = -0.00663721 Jy
! Component: 200  -  total flux cleaned = -0.00664954 Jy
! Total flux subtracted in 200 components = -0.00664954 Jy
! Clean residual min=-0.012986 max=0.016901 Jy/beam
! Clean residual mean=0.000003 rms=0.004746 Jy/beam
! Combined flux in latest and established models = 0.532969 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.532969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144238Jy  sigma=1.416906
! Fit after  self-cal, rms=0.144003Jy  sigma=1.414466
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.666 x 10.3 at -6.319 degrees (North through East)
! Clean map  min=-0.012874  max=0.4703 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.03877
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.10     KP        0.88     
!   LA        0.96     MK        0.95     NL        0.80     OV        1.08     
!   PT        1.00     SC        0.85     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.982023
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.19     KP        1.02     
!   LA        1.07     MK        1.00     NL        0.84     OV        1.02     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.03198
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.10     KP        0.90     
!   LA        0.80     MK        0.88     NL        0.90     OV        0.91     
!   PT        1.18     SC        1.06     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.992219
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.10     HN        1.16     KP        0.94     
!   LA        0.86     MK        0.99     NL        0.94     OV        1.00     
!   PT        1.18     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.144003Jy  sigma=1.414466
! Fit after  self-cal, rms=0.125924Jy  sigma=1.212267
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125924Jy  sigma=1.212267
! Fit after  self-cal, rms=0.125901Jy  sigma=1.212029
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.635 mas, bmaj=10.03 mas, bpa=-5.91 degrees
! Estimated noise=1.30129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859382 Jy
! Component: 100  -  total flux cleaned = 0.00909375 Jy
! Component: 150  -  total flux cleaned = 0.00947133 Jy
! Component: 200  -  total flux cleaned = 0.00963708 Jy
! Total flux subtracted in 200 components = 0.00963708 Jy
! Clean residual min=-0.006807 max=0.007187 Jy/beam
! Clean residual mean=0.000215 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 0.542606 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 69 components and 0.542606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124929Jy  sigma=1.200780
! Fit after  self-cal, rms=0.124924Jy  sigma=1.200192
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124924Jy  sigma=1.200192
! Fit after  self-cal, rms=0.121741Jy  sigma=1.122048
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166437 Jy
! Component: 100  -  total flux cleaned = 0.00182596 Jy
! Component: 150  -  total flux cleaned = 0.00195263 Jy
! Component: 200  -  total flux cleaned = 0.00195195 Jy
! Total flux subtracted in 200 components = 0.00195195 Jy
! Clean residual min=-0.006369 max=0.006948 Jy/beam
! Clean residual mean=0.000206 rms=0.002046 Jy/beam
! Combined flux in latest and established models = 0.544558 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.544558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121493Jy  sigma=1.118761
! Fit after  self-cal, rms=0.123001Jy  sigma=1.113537
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.635 x 10.03 at -5.91 degrees (North through East)
! Clean map  min=-0.006158  max=0.48096 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123001Jy  sigma=1.113537
! Fit after  self-cal, rms=0.118018Jy  sigma=1.050868
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118018Jy  sigma=1.050868
! Fit after  self-cal, rms=0.118666Jy  sigma=1.050302
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=10.02 mas, bpa=-5.576 degrees
! Estimated noise=1.2969 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116268 Jy
! Component: 100  -  total flux cleaned = 0.00100197 Jy
! Component: 150  -  total flux cleaned = 0.000927721 Jy
! Component: 200  -  total flux cleaned = 0.000982233 Jy
! Total flux subtracted in 200 components = 0.000982233 Jy
! Clean residual min=-0.005432 max=0.005293 Jy/beam
! Clean residual mean=0.000238 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.54554 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.54554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118595Jy  sigma=1.048862
! Fit after  self-cal, rms=0.118728Jy  sigma=1.048655
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118728Jy  sigma=1.048655
! Fit after  self-cal, rms=0.153376Jy  sigma=1.010961
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153376Jy  sigma=1.010961
! Fit after  self-cal, rms=0.153166Jy  sigma=1.009499
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=10.03 mas, bpa=-5.4 degrees
! Estimated noise=1.2996 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193726 Jy
! Component: 100  -  total flux cleaned = 0.00200449 Jy
! Component: 150  -  total flux cleaned = 0.00200296 Jy
! Component: 200  -  total flux cleaned = 0.00200383 Jy
! Total flux subtracted in 200 components = 0.00200383 Jy
! Clean residual min=-0.004769 max=0.005173 Jy/beam
! Clean residual mean=0.000240 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.547544 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.547544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153210Jy  sigma=1.008422
! Fit after  self-cal, rms=0.153712Jy  sigma=1.008148
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.205 mas, bmaj=16.51 mas, bpa=1.411 degrees
! Estimated noise=1.5857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729754 Jy
! Component: 100  -  total flux cleaned = 0.000685308 Jy
! Component: 150  -  total flux cleaned = 0.000652581 Jy
! Component: 200  -  total flux cleaned = 0.0006531 Jy
! Total flux subtracted in 200 components = 0.0006531 Jy
! Clean residual min=-0.005352 max=0.005814 Jy/beam
! Clean residual mean=0.000423 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.548197 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 107 components and 0.548197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153773Jy  sigma=1.008185
! Fit after  self-cal, rms=0.154225Jy  sigma=1.008088
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=8.133 mas, bpa=-5.286 degrees
! Estimated noise=2.0684 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.423173 Jy
! Component: 100  -  total flux cleaned = 0.500225 Jy
! Component: 150  -  total flux cleaned = 0.529527 Jy
! Component: 200  -  total flux cleaned = 0.541572 Jy
! Total flux subtracted in 200 components = 0.541572 Jy
! Clean residual min=-0.009636 max=0.008797 Jy/beam
! Clean residual mean=0.000124 rms=0.002493 Jy/beam
! Combined flux in latest and established models = 0.541572 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.541572 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=10.03 mas, bpa=-5.4 degrees
! Estimated noise=1.2996 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391162 Jy
! Component: 100  -  total flux cleaned = 0.00470633 Jy
! Component: 150  -  total flux cleaned = 0.00490146 Jy
! Component: 200  -  total flux cleaned = 0.00490374 Jy
! Total flux subtracted in 200 components = 0.00490374 Jy
! Clean residual min=-0.005294 max=0.006163 Jy/beam
! Clean residual mean=0.000254 rms=0.001641 Jy/beam
! Combined flux in latest and established models = 0.546476 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.546476 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.205 mas, bmaj=16.51 mas, bpa=1.411 degrees
! Estimated noise=1.5857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180781 Jy
! Component: 100  -  total flux cleaned = 0.00161066 Jy
! Component: 150  -  total flux cleaned = 0.00146094 Jy
! Component: 200  -  total flux cleaned = 0.00146112 Jy
! Total flux subtracted in 200 components = 0.00146112 Jy
! Clean residual min=-0.005716 max=0.005800 Jy/beam
! Clean residual mean=0.000432 rms=0.001910 Jy/beam
! Combined flux in latest and established models = 0.547937 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.547937 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=10.03 mas, bpa=-5.4 degrees
! Estimated noise=1.2996 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.92715e-06 Jy
! Component: 100  -  total flux cleaned = 5.80091e-06 Jy
! Component: 150  -  total flux cleaned = 1.28914e-05 Jy
! Component: 200  -  total flux cleaned = -8.01372e-05 Jy
! Total flux subtracted in 200 components = -8.01373e-05 Jy
! Clean residual min=-0.005194 max=0.005358 Jy/beam
! Clean residual mean=0.000239 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.547856 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.547856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154617Jy  sigma=1.012457
! Fit after  self-cal, rms=0.155208Jy  sigma=1.011601
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 15 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 5 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1048-1909_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1048-1909_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1048-1909_S_1997_01_11_pus_uve.log closed on Sun Feb  5 17:57:37 2006