! Started logfile: J1024-0052_S_1997_01_11_pus_uve.log on Sun Feb  5 17:55:35 2006
obs J1024-0052_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J1024-0052_S_1997_01_11_pus_uva.fits
! AN table 1: 202 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.838944 visibilities/baseline/integration-bin.
! Found source: J1024-0052
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 30504 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 21 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.788889 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.409506Jy  sigma=5.538114
! Fit after  self-cal, rms=0.409917Jy  sigma=5.495886
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=7.085 mas, bpa=-0.606 degrees
! Estimated noise=1.9427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.610411 Jy
! Component: 100  -  total flux cleaned = 0.789401 Jy
! Total flux subtracted in 100 components = 0.789401 Jy
! Clean residual min=-0.041737 max=0.053369 Jy/beam
! Clean residual mean=0.000359 rms=0.012845 Jy/beam
! Combined flux in latest and established models = 0.789401 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.789401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221517Jy  sigma=2.438367
! Fit after  self-cal, rms=0.219948Jy  sigma=2.415837
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.774 mas, bmaj=8.836 mas, bpa=-4.699 degrees
! Estimated noise=1.15078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0865619 Jy
! Component: 100  -  total flux cleaned = 0.0931012 Jy
! Component: 150  -  total flux cleaned = 0.0931675 Jy
! Component: 200  -  total flux cleaned = 0.0922694 Jy
! Total flux subtracted in 200 components = 0.0922694 Jy
! Clean residual min=-0.025741 max=0.025770 Jy/beam
! Clean residual mean=0.000191 rms=0.006001 Jy/beam
! Combined flux in latest and established models = 0.88167 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.88167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185982Jy  sigma=1.984670
! Fit after  self-cal, rms=0.185412Jy  sigma=1.978190
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.774 x 8.836 at -4.699 degrees (North through East)
! Clean map  min=-0.023751  max=0.66646 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.04167
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        1.13     KP        0.87     
!   LA        0.97     MK        0.90     NL        0.80     OV        1.06     
!   PT        1.02     SC        0.88     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.998567
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.09     HN        1.18     KP        1.00     
!   LA        1.07     MK        0.96     NL        0.86     OV        1.04     
!   PT        1.00     SC        0.87     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.04394
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.02     HN        1.04     KP        0.92     
!   LA        0.81     MK        0.80     NL        0.92     OV        0.93     
!   PT        1.19     SC        1.02     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.987324
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.08     HN        1.19     KP        0.97     
!   LA        0.89     MK        0.95     NL        0.96     OV        1.08     
!   PT        1.09     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.185412Jy  sigma=1.978190
! Fit after  self-cal, rms=0.156839Jy  sigma=1.683282
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156839Jy  sigma=1.683282
! Fit after  self-cal, rms=0.156877Jy  sigma=1.683132
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.674 mas, bmaj=8.421 mas, bpa=-4.115 degrees
! Estimated noise=1.16808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273314 Jy
! Component: 100  -  total flux cleaned = 0.0319335 Jy
! Component: 150  -  total flux cleaned = 0.0324699 Jy
! Component: 200  -  total flux cleaned = 0.0320802 Jy
! Total flux subtracted in 200 components = 0.0320802 Jy
! Clean residual min=-0.012326 max=0.011759 Jy/beam
! Clean residual mean=0.000060 rms=0.003167 Jy/beam
! Combined flux in latest and established models = 0.913751 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.91375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154166Jy  sigma=1.631946
! Fit after  self-cal, rms=0.154011Jy  sigma=1.630822
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154011Jy  sigma=1.630822
! Fit after  self-cal, rms=0.141496Jy  sigma=1.419965
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202668 Jy
! Component: 100  -  total flux cleaned = 0.00144319 Jy
! Component: 150  -  total flux cleaned = 0.00110716 Jy
! Component: 200  -  total flux cleaned = 0.000662945 Jy
! Total flux subtracted in 200 components = 0.000662945 Jy
! Clean residual min=-0.009770 max=0.010694 Jy/beam
! Clean residual mean=0.000056 rms=0.002701 Jy/beam
! Combined flux in latest and established models = 0.914413 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.914413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141190Jy  sigma=1.414155
! Fit after  self-cal, rms=0.141059Jy  sigma=1.403062
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.674 x 8.421 at -4.115 degrees (North through East)
! Clean map  min=-0.009256  max=0.67774 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141059Jy  sigma=1.403062
! Fit after  self-cal, rms=0.155512Jy  sigma=1.086249
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155512Jy  sigma=1.086249
! Fit after  self-cal, rms=0.155769Jy  sigma=1.084877
! Inverting map and beam 
! Estimated beam: bmin=3.639 mas, bmaj=8.337 mas, bpa=-4.083 degrees
! Estimated noise=1.16054 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139723 Jy
! Component: 100  -  total flux cleaned = 0.00156394 Jy
! Component: 150  -  total flux cleaned = 0.00156062 Jy
! Component: 200  -  total flux cleaned = 0.00142467 Jy
! Total flux subtracted in 200 components = 0.00142467 Jy
! Clean residual min=-0.008023 max=0.007097 Jy/beam
! Clean residual mean=0.000032 rms=0.001949 Jy/beam
! Combined flux in latest and established models = 0.915838 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.915838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155603Jy  sigma=1.079178
! Fit after  self-cal, rms=0.155671Jy  sigma=1.078229
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155671Jy  sigma=1.078229
! Fit after  self-cal, rms=0.160329Jy  sigma=1.036727
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160329Jy  sigma=1.036727
! Fit after  self-cal, rms=0.160375Jy  sigma=1.036668
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.308 mas, bpa=-3.958 degrees
! Estimated noise=1.15983 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000722298 Jy
! Component: 100  -  total flux cleaned = 0.00140099 Jy
! Component: 150  -  total flux cleaned = 0.0015107 Jy
! Component: 200  -  total flux cleaned = 0.00140967 Jy
! Total flux subtracted in 200 components = 0.00140967 Jy
! Clean residual min=-0.007765 max=0.006776 Jy/beam
! Clean residual mean=0.000025 rms=0.001861 Jy/beam
! Combined flux in latest and established models = 0.917248 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.917248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160303Jy  sigma=1.032576
! Fit after  self-cal, rms=0.160300Jy  sigma=1.031859
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.339 mas, bmaj=12.65 mas, bpa=-3.773 degrees
! Estimated noise=1.4313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257222 Jy
! Component: 100  -  total flux cleaned = 0.00257465 Jy
! Component: 150  -  total flux cleaned = 0.00270016 Jy
! Component: 200  -  total flux cleaned = 0.00280667 Jy
! Total flux subtracted in 200 components = 0.00280667 Jy
! Clean residual min=-0.004735 max=0.005251 Jy/beam
! Clean residual mean=0.000038 rms=0.001650 Jy/beam
! Combined flux in latest and established models = 0.920054 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.920054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160342Jy  sigma=1.031763
! Fit after  self-cal, rms=0.160242Jy  sigma=1.030976
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.906 mas, bmaj=7.055 mas, bpa=-1.404 degrees
! Estimated noise=1.9935 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.640864 Jy
! Component: 100  -  total flux cleaned = 0.823923 Jy
! Component: 150  -  total flux cleaned = 0.895809 Jy
! Component: 200  -  total flux cleaned = 0.911777 Jy
! Total flux subtracted in 200 components = 0.911777 Jy
! Clean residual min=-0.013830 max=0.017722 Jy/beam
! Clean residual mean=0.000090 rms=0.003603 Jy/beam
! Combined flux in latest and established models = 0.911777 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.911778 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.308 mas, bpa=-3.958 degrees
! Estimated noise=1.15983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -3.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00644536 Jy
! Component: 100  -  total flux cleaned = 0.00642156 Jy
! Component: 150  -  total flux cleaned = 0.00687975 Jy
! Component: 200  -  total flux cleaned = 0.00727693 Jy
! Total flux subtracted in 200 components = 0.00727693 Jy
! Clean residual min=-0.007157 max=0.010635 Jy/beam
! Clean residual mean=0.000022 rms=0.001979 Jy/beam
! Combined flux in latest and established models = 0.919054 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.919054 Jy
! Inverting map 
! Added new window around map position (4.5, 3.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038796 Jy
! Component: 100  -  total flux cleaned = 0.00420726 Jy
! Component: 150  -  total flux cleaned = 0.00420738 Jy
! Component: 200  -  total flux cleaned = 0.00421781 Jy
! Total flux subtracted in 200 components = 0.00421781 Jy
! Clean residual min=-0.005997 max=0.006661 Jy/beam
! Clean residual mean=0.000013 rms=0.001644 Jy/beam
! Combined flux in latest and established models = 0.923272 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 56 components and 0.923272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.339 mas, bmaj=12.65 mas, bpa=-3.773 degrees
! Estimated noise=1.4313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038779 Jy
! Component: 100  -  total flux cleaned = 0.000497439 Jy
! Component: 150  -  total flux cleaned = 0.000334611 Jy
! Component: 200  -  total flux cleaned = 0.000259356 Jy
! Total flux subtracted in 200 components = 0.000259356 Jy
! Clean residual min=-0.005085 max=0.004943 Jy/beam
! Clean residual mean=0.000027 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 0.923532 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 84 components and 0.923532 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=8.308 mas, bpa=-3.958 degrees
! Estimated noise=1.15983 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00053831 Jy
! Component: 100  -  total flux cleaned = -0.000330654 Jy
! Component: 150  -  total flux cleaned = -0.000142519 Jy
! Component: 200  -  total flux cleaned = 0.000197215 Jy
! Total flux subtracted in 200 components = 0.000197215 Jy
! Clean residual min=-0.005416 max=0.005984 Jy/beam
! Clean residual mean=0.000014 rms=0.001486 Jy/beam
! Combined flux in latest and established models = 0.923729 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.923729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159403Jy  sigma=1.010758
! Fit after  self-cal, rms=0.159342Jy  sigma=1.008175
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 12 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 5 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J1024-0052_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J1024-0052_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J1024-0052_S_1997_01_11_pus_uve.log closed on Sun Feb  5 17:56:14 2006