! Started logfile: J0405-1308_S_1997_01_11_pus_uvs.log on Fri Feb  3 20:42:56 2006
obs J0405-1308_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J0405-1308_S_1997_01_11_pus_uva.fits
! AN table 1: 203 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.803503 visibilities/baseline/integration-bin.
! Found source: J0405-1308
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 29360 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
float field_size
field_size = 512
float field_cell
field_cell = 0.5
float taper_size
taper_size = 20.
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 296 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 228 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 228 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 228 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.724235Jy  sigma=0.004406
! Fit after  self-cal, rms=0.699191Jy  sigma=0.004263
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.832 mas, bmaj=7.038 mas, bpa=-3.188 degrees
! Estimated noise=1103.35 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.294394 Jy
! Component: 100  -  total flux cleaned = 0.359313 Jy
! Total flux subtracted in 100 components = 0.359313 Jy
! Clean residual min=-0.011688 max=0.024510 Jy/beam
! Clean residual mean=0.002436 rms=0.004741 Jy/beam
! Combined flux in latest and established models = 0.359313 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.359313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.348072Jy  sigma=0.001941
! Fit after  self-cal, rms=0.348057Jy  sigma=0.001941
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.473 mas, bmaj=8.451 mas, bpa=-4.357 degrees
! Estimated noise=685.716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339796 Jy
! Component: 100  -  total flux cleaned = 0.0547072 Jy
! Component: 150  -  total flux cleaned = 0.0702501 Jy
! Component: 200  -  total flux cleaned = 0.0821395 Jy
! Total flux subtracted in 200 components = 0.0821396 Jy
! Clean residual min=-0.009518 max=0.020395 Jy/beam
! Clean residual mean=0.005937 rms=0.004547 Jy/beam
! Combined flux in latest and established models = 0.441452 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 36 components and 0.441452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.343307Jy  sigma=0.001919
! Fit after  self-cal, rms=0.343120Jy  sigma=0.001918
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.08     HN        1.08     KP        0.85     
!   LA        0.97     MK        1.01     NL        0.85     OV        1.14     
!   PT        0.94     SC        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.14     HN        1.20     KP        0.96     
!   LA        1.03     MK        1.02     NL        0.90     OV        1.05     
!   PT        0.97     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.06     KP        1.02     
!   LA        0.80     MK        0.88     NL        0.97     OV        0.90     
!   PT        1.07     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        1.17     KP        1.11     
!   LA        0.83     MK        1.04     NL        1.01     OV        1.06     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.343120Jy  sigma=0.001918
! Fit after  self-cal, rms=0.328869Jy  sigma=0.001890
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.48 mas, bmaj=8.401 mas, bpa=-4.204 degrees
! Estimated noise=679.023 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818857 Jy
! Component: 100  -  total flux cleaned = 0.0135824 Jy
! Component: 150  -  total flux cleaned = 0.0165243 Jy
! Component: 200  -  total flux cleaned = 0.0177449 Jy
! Total flux subtracted in 200 components = 0.0177449 Jy
! Clean residual min=-0.008978 max=0.017245 Jy/beam
! Clean residual mean=0.005182 rms=0.004429 Jy/beam
! Combined flux in latest and established models = 0.459197 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 53 components and 0.459197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.328505Jy  sigma=0.001889
! Fit after  self-cal, rms=0.328843Jy  sigma=0.001888
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.328843Jy  sigma=0.001888
! Fit after  self-cal, rms=0.353909Jy  sigma=0.001843
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.466 mas, bmaj=8.416 mas, bpa=-4.117 degrees
! Estimated noise=685.855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00558125 Jy
! Component: 100  -  total flux cleaned = -0.00707411 Jy
! Component: 150  -  total flux cleaned = -0.00739606 Jy
! Component: 200  -  total flux cleaned = -0.00769463 Jy
! Total flux subtracted in 200 components = -0.00769463 Jy
! Clean residual min=-0.009961 max=0.022747 Jy/beam
! Clean residual mean=0.001429 rms=0.004473 Jy/beam
! Combined flux in latest and established models = 0.451503 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.451503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.353541Jy  sigma=0.001843
! Fit after  self-cal, rms=0.356278Jy  sigma=0.001839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -42).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182944 Jy
! Component: 100  -  total flux cleaned = 0.0210565 Jy
! Component: 150  -  total flux cleaned = 0.0222022 Jy
! Component: 200  -  total flux cleaned = 0.0227037 Jy
! Total flux subtracted in 200 components = 0.0227037 Jy
! Clean residual min=-0.010731 max=0.014324 Jy/beam
! Clean residual mean=0.001285 rms=0.003823 Jy/beam
! Combined flux in latest and established models = 0.474206 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 105 components and 0.474206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354850Jy  sigma=0.001832
! Fit after  self-cal, rms=0.354357Jy  sigma=0.001832
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354357Jy  sigma=0.001832
! Fit after  self-cal, rms=0.354103Jy  sigma=0.001831
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=8.433 mas, bpa=-4.009 degrees
! Estimated noise=682.433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145678 Jy
! Component: 100  -  total flux cleaned = 0.00120612 Jy
! Component: 150  -  total flux cleaned = 0.000557963 Jy
! Component: 200  -  total flux cleaned = 0.000164003 Jy
! Total flux subtracted in 200 components = 0.000164003 Jy
! Clean residual min=-0.011447 max=0.014510 Jy/beam
! Clean residual mean=0.000924 rms=0.003878 Jy/beam
! Combined flux in latest and established models = 0.47437 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 122 components and 0.47437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.353623Jy  sigma=0.001829
! Fit after  self-cal, rms=0.353657Jy  sigma=0.001829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000390532 Jy
! Component: 100  -  total flux cleaned = -0.000391993 Jy
! Component: 150  -  total flux cleaned = -0.000567826 Jy
! Component: 200  -  total flux cleaned = -0.000887957 Jy
! Total flux subtracted in 200 components = -0.000887957 Jy
! Clean residual min=-0.011417 max=0.014413 Jy/beam
! Clean residual mean=0.000972 rms=0.003824 Jy/beam
! Combined flux in latest and established models = 0.473482 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 133 components and 0.473482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.353388Jy  sigma=0.001829
! Fit after  self-cal, rms=0.353325Jy  sigma=0.001829
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.353325Jy  sigma=0.001829
! Fit after  self-cal, rms=0.351878Jy  sigma=0.001829
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=14.52 mas, bpa=3.052 degrees
! Estimated noise=815.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228588 Jy
! Component: 100  -  total flux cleaned = 0.00167464 Jy
! Component: 150  -  total flux cleaned = 0.000974132 Jy
! Component: 200  -  total flux cleaned = 0.000502694 Jy
! Total flux subtracted in 200 components = 0.000502694 Jy
! Clean residual min=-0.015407 max=0.018943 Jy/beam
! Clean residual mean=0.001650 rms=0.005882 Jy/beam
! Combined flux in latest and established models = 0.473985 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 155 components and 0.473985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.351734Jy  sigma=0.001828
! Fit after  self-cal, rms=0.351659Jy  sigma=0.001828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000657196 Jy
! Component: 100  -  total flux cleaned = -0.00108059 Jy
! Component: 150  -  total flux cleaned = -0.00133979 Jy
! Component: 200  -  total flux cleaned = -0.00134365 Jy
! Total flux subtracted in 200 components = -0.00134365 Jy
! Clean residual min=-0.015339 max=0.019123 Jy/beam
! Clean residual mean=0.001728 rms=0.005834 Jy/beam
! Combined flux in latest and established models = 0.472641 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 168 components and 0.472641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.351598Jy  sigma=0.001828
! Fit after  self-cal, rms=0.351548Jy  sigma=0.001828
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=8.453 mas, bpa=-3.975 degrees
! Estimated noise=681.014 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.482 x 8.453 at -3.975 degrees (North through East)
! Clean map  min=-0.012096  max=0.37778 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.81 mas, bmaj=6.962 mas, bpa=-2.768 degrees
! Estimated noise=1126.32 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.299106 Jy
! Component: 100  -  total flux cleaned = 0.365652 Jy
! Component: 150  -  total flux cleaned = 0.390448 Jy
! Component: 200  -  total flux cleaned = 0.402076 Jy
! Total flux subtracted in 200 components = 0.402076 Jy
! Clean residual min=-0.011472 max=0.014166 Jy/beam
! Clean residual mean=0.000839 rms=0.004115 Jy/beam
! Combined flux in latest and established models = 0.402076 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.402076 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=8.453 mas, bpa=-3.975 degrees
! Estimated noise=681.014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226578 Jy
! Component: 100  -  total flux cleaned = 0.0322999 Jy
! Component: 150  -  total flux cleaned = 0.0389118 Jy
! Component: 200  -  total flux cleaned = 0.0433115 Jy
! Total flux subtracted in 200 components = 0.0433115 Jy
! Clean residual min=-0.011205 max=0.016434 Jy/beam
! Clean residual mean=0.001437 rms=0.004065 Jy/beam
! Combined flux in latest and established models = 0.445387 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 68 components and 0.445387 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=14.52 mas, bpa=3.052 degrees
! Estimated noise=815.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119508 Jy
! Component: 100  -  total flux cleaned = 0.0156131 Jy
! Component: 150  -  total flux cleaned = 0.0173815 Jy
! Component: 200  -  total flux cleaned = 0.0186361 Jy
! Total flux subtracted in 200 components = 0.0186361 Jy
! Clean residual min=-0.015660 max=0.019035 Jy/beam
! Clean residual mean=0.002050 rms=0.005921 Jy/beam
! Combined flux in latest and established models = 0.464023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127584 Jy
! Component: 100  -  total flux cleaned = 0.00235829 Jy
! Component: 150  -  total flux cleaned = 0.00314345 Jy
! Component: 200  -  total flux cleaned = 0.0038453 Jy
! Total flux subtracted in 200 components = 0.0038453 Jy
! Clean residual min=-0.015481 max=0.019100 Jy/beam
! Clean residual mean=0.001877 rms=0.005853 Jy/beam
! Combined flux in latest and established models = 0.467869 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 110 components and 0.467868 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=8.453 mas, bpa=-3.975 degrees
! Estimated noise=681.014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00132334 Jy
! Component: 100  -  total flux cleaned = -0.00132116 Jy
! Component: 150  -  total flux cleaned = -0.00131278 Jy
! Component: 200  -  total flux cleaned = -0.00130909 Jy
! Total flux subtracted in 200 components = -0.00130909 Jy
! Clean residual min=-0.012561 max=0.013965 Jy/beam
! Clean residual mean=0.000972 rms=0.003768 Jy/beam
! Combined flux in latest and established models = 0.466559 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 136 components and 0.466559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.351083Jy  sigma=0.001828
! Fit after  self-cal, rms=0.350901Jy  sigma=0.001827
wmodel J0405-1308_S_1997_01_11_pus_map.mod
! Writing 136 model components to file: J0405-1308_S_1997_01_11_pus_map.mod
wobs J0405-1308_S_1997_01_11_pus_uvs.fits
! Writing UV FITS file: J0405-1308_S_1997_01_11_pus_uvs.fits
wwins J0405-1308_S_1997_01_11_pus_map.win
! wwins: Wrote 4 windows to J0405-1308_S_1997_01_11_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620189 Jy
! Component: 100  -  total flux cleaned = 0.00971511 Jy
! Component: 150  -  total flux cleaned = 0.0129333 Jy
! Component: 200  -  total flux cleaned = 0.0163511 Jy
! Component: 250  -  total flux cleaned = 0.0194433 Jy
! Component: 300  -  total flux cleaned = 0.0227738 Jy
! Component: 350  -  total flux cleaned = 0.0258189 Jy
! Component: 400  -  total flux cleaned = 0.0282785 Jy
! Component: 450  -  total flux cleaned = 0.0305051 Jy
! Component: 500  -  total flux cleaned = 0.0329729 Jy
! Component: 550  -  total flux cleaned = 0.0350731 Jy
! Component: 600  -  total flux cleaned = 0.037123 Jy
! Component: 650  -  total flux cleaned = 0.0389813 Jy
! Component: 700  -  total flux cleaned = 0.0407961 Jy
! Component: 750  -  total flux cleaned = 0.042302 Jy
! Component: 800  -  total flux cleaned = 0.0439103 Jy
! Component: 850  -  total flux cleaned = 0.0450937 Jy
! Component: 900  -  total flux cleaned = 0.0463849 Jy
! Component: 950  -  total flux cleaned = 0.0479068 Jy
! Component: 1000  -  total flux cleaned = 0.049027 Jy
! Component: 1050  -  total flux cleaned = 0.0503743 Jy
! Component: 1100  -  total flux cleaned = 0.0513373 Jy
! Component: 1150  -  total flux cleaned = 0.0524038 Jy
! Component: 1200  -  total flux cleaned = 0.0535696 Jy
! Component: 1250  -  total flux cleaned = 0.0544894 Jy
! Component: 1300  -  total flux cleaned = 0.0558487 Jy
! Component: 1350  -  total flux cleaned = 0.0567425 Jy
! Component: 1400  -  total flux cleaned = 0.0578454 Jy
! Component: 1450  -  total flux cleaned = 0.0585 Jy
! Component: 1500  -  total flux cleaned = 0.0594707 Jy
! Component: 1550  -  total flux cleaned = 0.0603221 Jy
! Component: 1600  -  total flux cleaned = 0.0611639 Jy
! Component: 1650  -  total flux cleaned = 0.0616833 Jy
! Component: 1700  -  total flux cleaned = 0.0624041 Jy
! Component: 1750  -  total flux cleaned = 0.063015 Jy
! Component: 1800  -  total flux cleaned = 0.0638219 Jy
! Component: 1850  -  total flux cleaned = 0.0644214 Jy
! Component: 1900  -  total flux cleaned = 0.0652122 Jy
! Component: 1950  -  total flux cleaned = 0.0659954 Jy
! Component: 2000  -  total flux cleaned = 0.0666739 Jy
! Total flux subtracted in 2048 components = 0.067538 Jy
! Clean residual min=-0.007731 max=0.006084 Jy/beam
! Clean residual mean=0.000275 rms=0.002256 Jy/beam
! Combined flux in latest and established models = 0.534097 Jy
keep
! Adding 194 model components to the UV plane model.
! The established model now contains 330 components and 0.534097 Jy
wmap "J0405-1308_S_1997_01_11_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.482 x 8.453 at -3.975 degrees (North through East)
! Clean map  min=-0.010822  max=0.37989 Jy/beam
! Writing clean map to FITS file: J0405-1308_S_1997_01_11_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.379885 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00221232 
device "J0405-1308_S_1997_01_11_pus\_map.eps/VPS"
! Attempting to open device: 'J0405-1308_S_1997_01_11_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.74709 1.74709 3.49419 6.98838 13.9768 27.9535 55.907
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0066 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.379 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.482 x 8.453 at -3.975 degrees (North through East)
! Clean map  min=-0.010822  max=0.37989 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0405-1308_S_1997_01_11_pus\_map.gif/vgif"
! Attempting to open device: 'J0405-1308_S_1997_01_11_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0405-1308_S_1997_01_11_pus_uvs.log closed on Fri Feb  3 20:43:51 2006