! Started logfile: J0204-1701_S_1997_01_11_pus_uve.log on Sun Feb  5 16:57:01 2006
obs J0204-1701_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J0204-1701_S_1997_01_11_pus_uva.fits
! AN table 1: 204 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.843137 visibilities/baseline/integration-bin.
! Found source: J0204-1701
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 30960 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 358 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.02035 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.288972Jy  sigma=3.296652
! Fit after  self-cal, rms=0.284662Jy  sigma=3.287112
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=8.409 mas, bpa=-5.964 degrees
! Estimated noise=2.12517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.793824 Jy
! Component: 100  -  total flux cleaned = 0.985994 Jy
! Total flux subtracted in 100 components = 0.985994 Jy
! Clean residual min=-0.032373 max=0.062270 Jy/beam
! Clean residual mean=0.000045 rms=0.010441 Jy/beam
! Combined flux in latest and established models = 0.985994 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.985993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.237851Jy  sigma=2.376286
! Fit after  self-cal, rms=0.237567Jy  sigma=2.371778
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.683 mas, bmaj=10.59 mas, bpa=-7.206 degrees
! Estimated noise=1.26942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0721891 Jy
! Component: 100  -  total flux cleaned = 0.0800623 Jy
! Component: 150  -  total flux cleaned = 0.0791967 Jy
! Component: 200  -  total flux cleaned = 0.0784916 Jy
! Total flux subtracted in 200 components = 0.0784916 Jy
! Clean residual min=-0.024395 max=0.025509 Jy/beam
! Clean residual mean=0.000112 rms=0.006510 Jy/beam
! Combined flux in latest and established models = 1.06448 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 1.06448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210593Jy  sigma=2.117608
! Fit after  self-cal, rms=0.210141Jy  sigma=2.112611
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.683 x 10.59 at -7.206 degrees (North through East)
! Clean map  min=-0.025749  max=0.89856 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.0455
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        1.11     KP        0.87     
!   LA        0.99     MK        0.94     NL        0.83     OV        1.04     
!   PT        1.01     SC        0.79     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.998071
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.18     KP        0.97     
!   LA        1.07     MK        0.96     NL        0.88     OV        1.03     
!   PT        0.98     SC        0.83     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.039
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.04     KP        0.90     
!   LA        0.82     MK        0.89     NL        0.93     OV        0.90     
!   PT        1.18     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.992396
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.15     KP        0.95     
!   LA        0.88     MK        0.97     NL        0.98     OV        1.03     
!   PT        1.09     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.210141Jy  sigma=2.112611
! Fit after  self-cal, rms=0.162089Jy  sigma=1.678186
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162089Jy  sigma=1.678186
! Fit after  self-cal, rms=0.162088Jy  sigma=1.678084
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=10.13 mas, bpa=-6.254 degrees
! Estimated noise=1.2915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353301 Jy
! Component: 100  -  total flux cleaned = 0.0414035 Jy
! Component: 150  -  total flux cleaned = 0.0414836 Jy
! Component: 200  -  total flux cleaned = 0.0407124 Jy
! Total flux subtracted in 200 components = 0.0407124 Jy
! Clean residual min=-0.010948 max=0.012936 Jy/beam
! Clean residual mean=0.000266 rms=0.003352 Jy/beam
! Combined flux in latest and established models = 1.1052 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 1.1052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156783Jy  sigma=1.603733
! Fit after  self-cal, rms=0.156300Jy  sigma=1.599499
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156300Jy  sigma=1.599499
! Fit after  self-cal, rms=0.130042Jy  sigma=1.296540
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027155 Jy
! Component: 100  -  total flux cleaned = 0.00246919 Jy
! Component: 150  -  total flux cleaned = 0.00181135 Jy
! Component: 200  -  total flux cleaned = 0.00109028 Jy
! Total flux subtracted in 200 components = 0.00109028 Jy
! Clean residual min=-0.011092 max=0.012158 Jy/beam
! Clean residual mean=0.000283 rms=0.003135 Jy/beam
! Combined flux in latest and established models = 1.10629 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 1.10629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129095Jy  sigma=1.285664
! Fit after  self-cal, rms=0.128385Jy  sigma=1.272943
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.589 x 10.13 at -6.254 degrees (North through East)
! Clean map  min=-0.010727  max=0.92626 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128385Jy  sigma=1.272943
! Fit after  self-cal, rms=0.109420Jy  sigma=1.074950
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109420Jy  sigma=1.074950
! Fit after  self-cal, rms=0.109599Jy  sigma=1.074178
! Inverting map and beam 
! Estimated beam: bmin=3.591 mas, bmaj=10.11 mas, bpa=-6.003 degrees
! Estimated noise=1.2874 mJy/beam.
! Added new window around map position (5, 19).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.012227 Jy
! Component: 100  -  total flux cleaned = 0.0120766 Jy
! Component: 150  -  total flux cleaned = 0.0114227 Jy
! Component: 200  -  total flux cleaned = 0.0108736 Jy
! Total flux subtracted in 200 components = 0.0108736 Jy
! Clean residual min=-0.006682 max=0.006271 Jy/beam
! Clean residual mean=0.000061 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 1.11716 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 71 components and 1.11716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107823Jy  sigma=1.049325
! Fit after  self-cal, rms=0.107596Jy  sigma=1.046609
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107596Jy  sigma=1.046609
! Fit after  self-cal, rms=0.103728Jy  sigma=1.001836
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103728Jy  sigma=1.001836
! Fit after  self-cal, rms=0.103751Jy  sigma=1.001811
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=10.06 mas, bpa=-5.903 degrees
! Estimated noise=1.28719 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00523659 Jy
! Component: 100  -  total flux cleaned = 0.00539067 Jy
! Component: 150  -  total flux cleaned = 0.00527567 Jy
! Component: 200  -  total flux cleaned = 0.00527714 Jy
! Total flux subtracted in 200 components = 0.00527714 Jy
! Clean residual min=-0.006315 max=0.005214 Jy/beam
! Clean residual mean=-0.000011 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 1.12244 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 1.12244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103143Jy  sigma=0.994547
! Fit after  self-cal, rms=0.103032Jy  sigma=0.993436
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.655 mas, bmaj=16.28 mas, bpa=3.68 degrees
! Estimated noise=1.58724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.82646e-05 Jy
! Component: 100  -  total flux cleaned = 0.000531108 Jy
! Component: 150  -  total flux cleaned = 0.000998008 Jy
! Component: 200  -  total flux cleaned = 0.00124994 Jy
! Total flux subtracted in 200 components = 0.00124994 Jy
! Clean residual min=-0.006233 max=0.005509 Jy/beam
! Clean residual mean=-0.000036 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 1.12369 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 1.12369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102876Jy  sigma=0.992358
! Fit after  self-cal, rms=0.102800Jy  sigma=0.991053
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.797 mas, bmaj=8.221 mas, bpa=-5.143 degrees
! Estimated noise=2.13755 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.802844 Jy
! Component: 100  -  total flux cleaned = 0.994151 Jy
! Component: 150  -  total flux cleaned = 1.06203 Jy
! Component: 200  -  total flux cleaned = 1.09653 Jy
! Total flux subtracted in 200 components = 1.09653 Jy
! Clean residual min=-0.013720 max=0.013272 Jy/beam
! Clean residual mean=0.000030 rms=0.003465 Jy/beam
! Combined flux in latest and established models = 1.09653 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 1.09653 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=10.06 mas, bpa=-5.903 degrees
! Estimated noise=1.28719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225451 Jy
! Component: 100  -  total flux cleaned = 0.0272253 Jy
! Component: 150  -  total flux cleaned = 0.0280519 Jy
! Component: 200  -  total flux cleaned = 0.0290468 Jy
! Total flux subtracted in 200 components = 0.0290468 Jy
! Clean residual min=-0.006875 max=0.006678 Jy/beam
! Clean residual mean=-0.000032 rms=0.001863 Jy/beam
! Combined flux in latest and established models = 1.12557 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 75 components and 1.12557 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.655 mas, bmaj=16.28 mas, bpa=3.68 degrees
! Estimated noise=1.58724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000824801 Jy
! Component: 100  -  total flux cleaned = 0.000697013 Jy
! Component: 150  -  total flux cleaned = 0.000360083 Jy
! Component: 200  -  total flux cleaned = 0.000261089 Jy
! Total flux subtracted in 200 components = 0.000261089 Jy
! Clean residual min=-0.006133 max=0.005344 Jy/beam
! Clean residual mean=-0.000060 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 1.12583 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 1.12583 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=10.06 mas, bpa=-5.903 degrees
! Estimated noise=1.28719 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -3.13842e-05 Jy
! Component: 100  -  total flux cleaned = -2.40451e-05 Jy
! Component: 150  -  total flux cleaned = -2.64229e-05 Jy
! Component: 200  -  total flux cleaned = 0.000144909 Jy
! Total flux subtracted in 200 components = 0.000144909 Jy
! Clean residual min=-0.006614 max=0.005791 Jy/beam
! Clean residual mean=-0.000032 rms=0.001656 Jy/beam
! Combined flux in latest and established models = 1.12598 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 1.12598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103069Jy  sigma=0.996486
! Fit after  self-cal, rms=0.102871Jy  sigma=0.993592
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 7 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 3 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J0204-1701_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J0204-1701_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J0204-1701_S_1997_01_11_pus_uve.log closed on Sun Feb  5 16:57:43 2006