! Started logfile: J0116-1136_S_1997_01_11_pus_uve.log on Sun Feb  5 16:51:53 2006
obs J0116-1136_S_1997_01_11_pus_uva.fits
! Reading UV FITS file: J0116-1136_S_1997_01_11_pus_uva.fits
! AN table 1: 203 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.790148 visibilities/baseline/integration-bin.
! Found source: J0116-1136
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22049e+09        4e+06          1        4e+06
!  02        2  2.23236e+09        4e+06          1        4e+06
!  03        3  2.29236e+09        4e+06          1        4e+06
!  04        4  2.32236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 606 lines of history.
! 
! Reading 28872 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 5
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=7
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
! Applying 106 buffered edits.
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.781095 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 7 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.346137Jy  sigma=4.517685
! Fit after  self-cal, rms=0.341882Jy  sigma=4.466162
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.561 mas, bpa=-4.116 degrees
! Estimated noise=1.80042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.585506 Jy
! Component: 100  -  total flux cleaned = 0.700106 Jy
! Total flux subtracted in 100 components = 0.700106 Jy
! Clean residual min=-0.039401 max=0.075266 Jy/beam
! Clean residual mean=0.000414 rms=0.012186 Jy/beam
! Combined flux in latest and established models = 0.700106 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.700106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230126Jy  sigma=2.625497
! Fit after  self-cal, rms=0.229536Jy  sigma=2.617563
! Inverting map 
! Added new window around map position (-4.5, 5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0841449 Jy
! Component: 100  -  total flux cleaned = 0.126424 Jy
! Total flux subtracted in 100 components = 0.126424 Jy
! Clean residual min=-0.036418 max=0.047510 Jy/beam
! Clean residual mean=0.000353 rms=0.009799 Jy/beam
! Combined flux in latest and established models = 0.82653 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.82653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193303Jy  sigma=2.172467
! Fit after  self-cal, rms=0.190853Jy  sigma=2.128958
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.707 mas, bmaj=9.787 mas, bpa=-5.241 degrees
! Estimated noise=1.20764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434415 Jy
! Component: 100  -  total flux cleaned = 0.0637025 Jy
! Component: 150  -  total flux cleaned = 0.0684029 Jy
! Component: 200  -  total flux cleaned = 0.0701467 Jy
! Total flux subtracted in 200 components = 0.0701467 Jy
! Clean residual min=-0.022789 max=0.041982 Jy/beam
! Clean residual mean=0.000774 rms=0.008055 Jy/beam
! Combined flux in latest and established models = 0.896676 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 45 components and 0.896676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178803Jy  sigma=2.021501
! Fit after  self-cal, rms=0.178559Jy  sigma=2.016740
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.707 x 9.787 at -5.241 degrees (North through East)
! Clean map  min=-0.020324  max=0.68123 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.04077
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        1.07     KP        0.85     
!   LA        0.95     MK        0.93     NL        0.88     OV        1.06     
!   PT        1.00     SC        0.88     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.986228
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.13     HN        1.15     KP        0.96     
!   LA        1.05     MK        0.97     NL        0.97     OV        1.03     
!   PT        1.01     SC        0.90     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.0316
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.07     HN        1.01     KP        0.88     
!   LA        0.81     MK        0.85     NL        0.95     OV        0.91     
!   PT        1.17     SC        1.10     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.974985
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        1.14     KP        0.95     
!   LA        0.87     MK        0.98     NL        1.07     OV        1.02     
!   PT        1.08     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.178559Jy  sigma=2.016740
! Fit after  self-cal, rms=0.146966Jy  sigma=1.688331
selfcal false, false, phase_soltime
! Performing phase self-cal over 7 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146966Jy  sigma=1.688331
! Fit after  self-cal, rms=0.146943Jy  sigma=1.687631
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.657 mas, bmaj=9.619 mas, bpa=-5.642 degrees
! Estimated noise=1.21228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21, 26.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320764 Jy
! Component: 100  -  total flux cleaned = 0.0476803 Jy
! Component: 150  -  total flux cleaned = 0.0518027 Jy
! Component: 200  -  total flux cleaned = 0.0541599 Jy
! Total flux subtracted in 200 components = 0.0541598 Jy
! Clean residual min=-0.011859 max=0.017873 Jy/beam
! Clean residual mean=0.000292 rms=0.003558 Jy/beam
! Combined flux in latest and established models = 0.950836 Jy
! Performing phase self-cal over 7 minute time intervals
! Adding 45 model components to the UV plane model.
! The established model now contains 90 components and 0.950836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140940Jy  sigma=1.606822
! Fit after  self-cal, rms=0.140340Jy  sigma=1.600331
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140340Jy  sigma=1.600331
! Fit after  self-cal, rms=0.123907Jy  sigma=1.390879
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.5, -47).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.018726 Jy
! Component: 100  -  total flux cleaned = 0.0191794 Jy
! Component: 150  -  total flux cleaned = 0.0191719 Jy
! Component: 200  -  total flux cleaned = 0.0191798 Jy
! Total flux subtracted in 200 components = 0.0191798 Jy
! Clean residual min=-0.010882 max=0.013468 Jy/beam
! Clean residual mean=0.000209 rms=0.002978 Jy/beam
! Combined flux in latest and established models = 0.970016 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 121 components and 0.970016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120592Jy  sigma=1.347510
! Fit after  self-cal, rms=0.120017Jy  sigma=1.336464
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.657 x 9.619 at -5.642 degrees (North through East)
! Clean map  min=-0.010701  max=0.68136 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120017Jy  sigma=1.336464
! Fit after  self-cal, rms=0.093719Jy  sigma=1.023156
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093719Jy  sigma=1.023156
! Fit after  self-cal, rms=0.093806Jy  sigma=1.022187
! Inverting map and beam 
! Estimated beam: bmin=3.703 mas, bmaj=9.672 mas, bpa=-5.311 degrees
! Estimated noise=1.20616 mJy/beam.
! Added new window around map position (-12.5, 15.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417186 Jy
! Component: 100  -  total flux cleaned = 0.00563574 Jy
! Component: 150  -  total flux cleaned = 0.00656489 Jy
! Component: 200  -  total flux cleaned = 0.00694205 Jy
! Total flux subtracted in 200 components = 0.00694205 Jy
! Clean residual min=-0.006132 max=0.006800 Jy/beam
! Clean residual mean=0.000119 rms=0.001664 Jy/beam
! Combined flux in latest and established models = 0.976958 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 147 components and 0.976958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092701Jy  sigma=1.004573
! Fit after  self-cal, rms=0.092660Jy  sigma=1.003232
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092660Jy  sigma=1.003232
! Fit after  self-cal, rms=0.089832Jy  sigma=0.963673
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089832Jy  sigma=0.963673
! Fit after  self-cal, rms=0.089916Jy  sigma=0.963620
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=9.661 mas, bpa=-5.22 degrees
! Estimated noise=1.20439 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226289 Jy
! Component: 100  -  total flux cleaned = 0.00319894 Jy
! Component: 150  -  total flux cleaned = 0.00367366 Jy
! Component: 200  -  total flux cleaned = 0.00381383 Jy
! Total flux subtracted in 200 components = 0.00381383 Jy
! Clean residual min=-0.005787 max=0.006113 Jy/beam
! Clean residual mean=0.000134 rms=0.001509 Jy/beam
! Combined flux in latest and established models = 0.980772 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 166 components and 0.980772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089406Jy  sigma=0.955804
! Fit after  self-cal, rms=0.089414Jy  sigma=0.955203
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.574 mas, bmaj=14.65 mas, bpa=3.706 degrees
! Estimated noise=1.46961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634487 Jy
! Component: 100  -  total flux cleaned = 0.000876221 Jy
! Component: 150  -  total flux cleaned = 0.000973698 Jy
! Component: 200  -  total flux cleaned = 0.00106504 Jy
! Total flux subtracted in 200 components = 0.00106504 Jy
! Clean residual min=-0.006202 max=0.006788 Jy/beam
! Clean residual mean=0.000226 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 0.981837 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 191 components and 0.981837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089296Jy  sigma=0.953509
! Fit after  self-cal, rms=0.089339Jy  sigma=0.953394
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.943 mas, bmaj=7.552 mas, bpa=-3.994 degrees
! Estimated noise=1.83564 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.600966 Jy
! Component: 100  -  total flux cleaned = 0.73625 Jy
! Component: 150  -  total flux cleaned = 0.798695 Jy
! Component: 200  -  total flux cleaned = 0.836966 Jy
! Total flux subtracted in 200 components = 0.836966 Jy
! Clean residual min=-0.011348 max=0.016224 Jy/beam
! Clean residual mean=0.000302 rms=0.003925 Jy/beam
! Combined flux in latest and established models = 0.836966 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.836966 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=9.661 mas, bpa=-5.22 degrees
! Estimated noise=1.20439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0422617 Jy
! Component: 100  -  total flux cleaned = 0.0691971 Jy
! Component: 150  -  total flux cleaned = 0.0887807 Jy
! Component: 200  -  total flux cleaned = 0.103398 Jy
! Total flux subtracted in 200 components = 0.103398 Jy
! Clean residual min=-0.007119 max=0.008959 Jy/beam
! Clean residual mean=0.000395 rms=0.002467 Jy/beam
! Combined flux in latest and established models = 0.940364 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 115 components and 0.940364 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.574 mas, bmaj=14.65 mas, bpa=3.706 degrees
! Estimated noise=1.46961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162044 Jy
! Component: 100  -  total flux cleaned = 0.0257406 Jy
! Component: 150  -  total flux cleaned = 0.0300496 Jy
! Component: 200  -  total flux cleaned = 0.0328452 Jy
! Total flux subtracted in 200 components = 0.0328452 Jy
! Clean residual min=-0.006370 max=0.005653 Jy/beam
! Clean residual mean=0.000328 rms=0.001920 Jy/beam
! Combined flux in latest and established models = 0.973209 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 181 components and 0.97321 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.704 mas, bmaj=9.661 mas, bpa=-5.22 degrees
! Estimated noise=1.20439 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241783 Jy
! Component: 100  -  total flux cleaned = 0.00358828 Jy
! Component: 150  -  total flux cleaned = 0.00440997 Jy
! Component: 200  -  total flux cleaned = 0.00500326 Jy
! Total flux subtracted in 200 components = 0.00500326 Jy
! Clean residual min=-0.005133 max=0.005740 Jy/beam
! Clean residual mean=0.000145 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.978213 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 208 components and 0.978213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089708Jy  sigma=0.955302
! Fit after  self-cal, rms=0.089541Jy  sigma=0.952015
dev /xwindow
! Attempting to open device: '/xwindow'
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
tplot
! Using default options string ""
! Move the cursor into the plot window and press 'H' for help
rflags="m1-"
radplot
! Overriding default options with user defined rflags="m1-"
! Move the cursor into the plot window and press 'H' for help
! Applying 1 buffered edits.
vplot 3
! Using default options string "efbm3"
! For help move the cursor into the plot window and press 'H'.
rflags="m3"
radplot
! Overriding default options with user defined rflags="m3"
! Move the cursor into the plot window and press 'H' for help
uncal true,true
! uncal: All telescope phase corrections have been un-done.
! uncal: All telescope amplitude corrections have been un-done.
wobs "J0116-1136_S_1997_01_11_pus\_uve.fits"
! Writing UV FITS file: J0116-1136_S_1997_01_11_pus_uve.fits
print "* Congratulations, you are done!"
! * Congratulations, you are done! 
quit
! Quitting program
! Log file J0116-1136_S_1997_01_11_pus_uve.log closed on Sun Feb  5 16:52:42 2006