! Started logfile: J2358-1020_X_1997_01_10_pus_uvs.log on Mon Jan 30 11:23:57 2006
obs J2358-1020_X_1997_01_10_pus_uve.fits
! Reading UV FITS file: J2358-1020_X_1997_01_10_pus_uve.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.708333 visibilities/baseline/integration-bin.
! Found source: J2358-1020
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15049e+09        8e+06          1        8e+06
!  02        2  8.23424e+09        8e+06          1        8e+06
!  03        3  8.41424e+09        8e+06          1        8e+06
!  04        4  8.55424e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 497 lines of history.
! 
! Reading 3060 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.24791 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7791 mas, bmaj=1.921 mas, bpa=-5.253 degrees
! Estimated noise=1.33788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.940709 Jy
! Component: 100  -  total flux cleaned = 1.09782 Jy
! Total flux subtracted in 100 components = 1.09782 Jy
! Clean residual min=-0.084323 max=0.109505 Jy/beam
! Clean residual mean=0.000188 rms=0.022622 Jy/beam
! Combined flux in latest and established models = 1.09782 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.09782 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.607940Jy  sigma=8.302579
! Fit after  self-cal, rms=0.531454Jy  sigma=7.311991
! Inverting map and beam 
! Estimated beam: bmin=0.7778 mas, bmaj=1.925 mas, bpa=-5.349 degrees
! Estimated noise=1.32019 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9917 mas, bmaj=2.441 mas, bpa=-6.66 degrees
! Estimated noise=0.85523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.127869 Jy
! Component: 100  -  total flux cleaned = 0.149475 Jy
! Component: 150  -  total flux cleaned = 0.150776 Jy
! Component: 200  -  total flux cleaned = 0.152849 Jy
! Total flux subtracted in 200 components = 0.152849 Jy
! Clean residual min=-0.054189 max=0.066878 Jy/beam
! Clean residual mean=-0.000643 rms=0.014883 Jy/beam
! Combined flux in latest and established models = 1.25067 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 1.25067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.520914Jy  sigma=6.921429
! Fit after  self-cal, rms=0.519685Jy  sigma=6.898211
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9917 x 2.441 at -6.66 degrees (North through East)
! Clean map  min=-0.05128  max=1.1618 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.984569
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.90     HN        1.43     KP        0.91     
!   LA        0.95     MK        0.88     NL        1.16     OV        0.88     
!   PT        1.23     SC        0.91     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.980286
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.90     HN        1.37     KP        0.87     
!   LA        0.95     MK        0.86     NL        1.15     OV        0.91     
!   PT        1.24     SC        1.03     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.938731
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.91     HN        1.76     KP        0.89     
!   LA        0.95     MK        0.89     NL        1.16     OV        0.88     
!   PT        1.26     SC        1.04     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.952075
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.91     HN        1.53     KP        0.90     
!   LA        0.97     MK        0.88     NL        1.20     OV        0.88     
!   PT        1.27     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.519685Jy  sigma=6.898211
! Fit after  self-cal, rms=0.456678Jy  sigma=6.004378
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.456678Jy  sigma=6.004378
! Fit after  self-cal, rms=0.455521Jy  sigma=5.976374
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=2.422 mas, bpa=-6.714 degrees
! Estimated noise=0.770559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0761953 Jy
! Component: 100  -  total flux cleaned = -0.0921439 Jy
! Component: 150  -  total flux cleaned = -0.0930429 Jy
! Component: 200  -  total flux cleaned = -0.0934062 Jy
! Total flux subtracted in 200 components = -0.0934062 Jy
! Clean residual min=-0.017749 max=0.019200 Jy/beam
! Clean residual mean=0.000075 rms=0.004690 Jy/beam
! Combined flux in latest and established models = 1.15727 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 1.15727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.441640Jy  sigma=5.778604
! Fit after  self-cal, rms=0.440116Jy  sigma=5.753869
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.440116Jy  sigma=5.753869
! Fit after  self-cal, rms=0.170576Jy  sigma=2.183041
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295461 Jy
! Component: 100  -  total flux cleaned = 0.0280302 Jy
! Component: 150  -  total flux cleaned = 0.0268184 Jy
! Component: 200  -  total flux cleaned = 0.0258817 Jy
! Total flux subtracted in 200 components = 0.0258817 Jy
! Clean residual min=-0.012864 max=0.016551 Jy/beam
! Clean residual mean=0.000075 rms=0.003392 Jy/beam
! Combined flux in latest and established models = 1.18315 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 1.18315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162256Jy  sigma=2.011851
! Fit after  self-cal, rms=0.153849Jy  sigma=1.920806
! Inverting map 
! Added new window around map position (-9.8, 12.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108941 Jy
! Component: 100  -  total flux cleaned = 0.0121492 Jy
! Component: 150  -  total flux cleaned = 0.0121436 Jy
! Component: 200  -  total flux cleaned = 0.0118337 Jy
! Total flux subtracted in 200 components = 0.0118337 Jy
! Clean residual min=-0.012130 max=0.013394 Jy/beam
! Clean residual mean=0.000043 rms=0.003185 Jy/beam
! Combined flux in latest and established models = 1.19498 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 1.19498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151019Jy  sigma=1.878483
! Fit after  self-cal, rms=0.150129Jy  sigma=1.868400
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.004 x 2.422 at -6.714 degrees (North through East)
! Clean map  min=-0.011295  max=1.1209 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150129Jy  sigma=1.868400
! Fit after  self-cal, rms=0.089000Jy  sigma=1.052830
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089000Jy  sigma=1.052830
! Fit after  self-cal, rms=0.088810Jy  sigma=1.050956
! Inverting map and beam 
! Estimated beam: bmin=0.9964 mas, bmaj=2.414 mas, bpa=-6.282 degrees
! Estimated noise=0.766281 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00574348 Jy
! Component: 100  -  total flux cleaned = -0.00672544 Jy
! Component: 150  -  total flux cleaned = -0.00673214 Jy
! Component: 200  -  total flux cleaned = -0.00672893 Jy
! Total flux subtracted in 200 components = -0.00672893 Jy
! Clean residual min=-0.006226 max=0.005617 Jy/beam
! Clean residual mean=0.000002 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 1.18825 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 1.18825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087639Jy  sigma=1.027661
! Fit after  self-cal, rms=0.087441Jy  sigma=1.024381
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087441Jy  sigma=1.024381
! Fit after  self-cal, rms=0.078981Jy  sigma=0.921426
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078981Jy  sigma=0.921426
! Fit after  self-cal, rms=0.078951Jy  sigma=0.921328
! Inverting map and beam 
! Estimated beam: bmin=0.9968 mas, bmaj=2.408 mas, bpa=-6.135 degrees
! Estimated noise=0.766111 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00203552 Jy
! Component: 100  -  total flux cleaned = -0.00238736 Jy
! Component: 150  -  total flux cleaned = -0.0026629 Jy
! Component: 200  -  total flux cleaned = -0.00266392 Jy
! Total flux subtracted in 200 components = -0.00266392 Jy
! Clean residual min=-0.004970 max=0.004625 Jy/beam
! Clean residual mean=0.000006 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 1.18559 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 1.18559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078206Jy  sigma=0.909023
! Fit after  self-cal, rms=0.078130Jy  sigma=0.907410
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=3.815 mas, bpa=4.113 degrees
! Estimated noise=0.937401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585594 Jy
! Component: 100  -  total flux cleaned = 0.000401556 Jy
! Component: 150  -  total flux cleaned = 0.000324092 Jy
! Component: 200  -  total flux cleaned = 0.000324674 Jy
! Total flux subtracted in 200 components = 0.000324674 Jy
! Clean residual min=-0.003676 max=0.003795 Jy/beam
! Clean residual mean=0.000012 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 1.18591 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 71 components and 1.18591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077858Jy  sigma=0.904162
! Fit after  self-cal, rms=0.077827Jy  sigma=0.903091
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7693 mas, bmaj=1.904 mas, bpa=-4.93 degrees
! Estimated noise=1.22929 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.97057 Jy
! Component: 100  -  total flux cleaned = 1.12095 Jy
! Component: 150  -  total flux cleaned = 1.16329 Jy
! Component: 200  -  total flux cleaned = 1.1723 Jy
! Total flux subtracted in 200 components = 1.1723 Jy
! Clean residual min=-0.008192 max=0.009996 Jy/beam
! Clean residual mean=0.000030 rms=0.001899 Jy/beam
! Combined flux in latest and established models = 1.1723 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.1723 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9968 mas, bmaj=2.408 mas, bpa=-6.135 degrees
! Estimated noise=0.766111 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -1.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113074 Jy
! Component: 100  -  total flux cleaned = 0.0113139 Jy
! Component: 150  -  total flux cleaned = 0.0115348 Jy
! Component: 200  -  total flux cleaned = 0.0117258 Jy
! Total flux subtracted in 200 components = 0.0117258 Jy
! Clean residual min=-0.004671 max=0.004096 Jy/beam
! Clean residual mean=0.000012 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 1.18402 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 40 components and 1.18402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=3.815 mas, bpa=4.113 degrees
! Estimated noise=0.937401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147675 Jy
! Component: 100  -  total flux cleaned = 0.00184642 Jy
! Component: 150  -  total flux cleaned = 0.00192572 Jy
! Component: 200  -  total flux cleaned = 0.00192339 Jy
! Total flux subtracted in 200 components = 0.00192339 Jy
! Clean residual min=-0.003548 max=0.003281 Jy/beam
! Clean residual mean=0.000017 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 1.18595 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 1.18595 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9968 mas, bmaj=2.408 mas, bpa=-6.135 degrees
! Estimated noise=0.766111 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000743001 Jy
! Component: 100  -  total flux cleaned = -0.000999313 Jy
! Component: 150  -  total flux cleaned = -0.00134963 Jy
! Component: 200  -  total flux cleaned = -0.00156194 Jy
! Total flux subtracted in 200 components = -0.00156194 Jy
! Clean residual min=-0.004168 max=0.003667 Jy/beam
! Clean residual mean=0.000012 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 1.18439 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 1.18439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077229Jy  sigma=0.892311
! Fit after  self-cal, rms=0.077008Jy  sigma=0.888835
wmodel J2358-1020_X_1997_01_10_pus\_map.mod
! Writing 73 model components to file: J2358-1020_X_1997_01_10_pus_map.mod
wobs J2358-1020_X_1997_01_10_pus\_uvs.fits
! Writing UV FITS file: J2358-1020_X_1997_01_10_pus_uvs.fits
wwins J2358-1020_X_1997_01_10_pus\_map.win
! wwins: Wrote 3 windows to J2358-1020_X_1997_01_10_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000957815 Jy
! Component: 100  -  total flux cleaned = -0.00216452 Jy
! Component: 150  -  total flux cleaned = -0.00318245 Jy
! Component: 200  -  total flux cleaned = -0.00380667 Jy
! Component: 250  -  total flux cleaned = -0.00429536 Jy
! Component: 300  -  total flux cleaned = -0.00466068 Jy
! Component: 350  -  total flux cleaned = -0.00501333 Jy
! Component: 400  -  total flux cleaned = -0.00525709 Jy
! Component: 450  -  total flux cleaned = -0.00535163 Jy
! Component: 500  -  total flux cleaned = -0.00539762 Jy
! Component: 550  -  total flux cleaned = -0.00548794 Jy
! Component: 600  -  total flux cleaned = -0.00553219 Jy
! Component: 650  -  total flux cleaned = -0.00553173 Jy
! Component: 700  -  total flux cleaned = -0.00548973 Jy
! Component: 750  -  total flux cleaned = -0.00540699 Jy
! Component: 800  -  total flux cleaned = -0.0054481 Jy
! Component: 850  -  total flux cleaned = -0.00544801 Jy
! Component: 900  -  total flux cleaned = -0.0054477 Jy
! Component: 950  -  total flux cleaned = -0.00540903 Jy
! Component: 1000  -  total flux cleaned = -0.00548448 Jy
! Component: 1050  -  total flux cleaned = -0.00548416 Jy
! Component: 1100  -  total flux cleaned = -0.00552119 Jy
! Component: 1150  -  total flux cleaned = -0.00562924 Jy
! Component: 1200  -  total flux cleaned = -0.00545108 Jy
! Component: 1250  -  total flux cleaned = -0.00552195 Jy
! Component: 1300  -  total flux cleaned = -0.00559061 Jy
! Component: 1350  -  total flux cleaned = -0.00545323 Jy
! Component: 1400  -  total flux cleaned = -0.00552066 Jy
! Component: 1450  -  total flux cleaned = -0.00538779 Jy
! Component: 1500  -  total flux cleaned = -0.00542065 Jy
! Component: 1550  -  total flux cleaned = -0.00535542 Jy
! Component: 1600  -  total flux cleaned = -0.0052594 Jy
! Component: 1650  -  total flux cleaned = -0.00526018 Jy
! Component: 1700  -  total flux cleaned = -0.00529127 Jy
! Component: 1750  -  total flux cleaned = -0.00532277 Jy
! Component: 1800  -  total flux cleaned = -0.00523067 Jy
! Component: 1850  -  total flux cleaned = -0.00532142 Jy
! Component: 1900  -  total flux cleaned = -0.00520108 Jy
! Component: 1950  -  total flux cleaned = -0.00526073 Jy
! Component: 2000  -  total flux cleaned = -0.00523144 Jy
! Total flux subtracted in 2048 components = -0.00523113 Jy
! Clean residual min=-0.001750 max=0.001446 Jy/beam
! Clean residual mean=0.000015 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 1.17915 Jy
keep
! Adding 148 model components to the UV plane model.
! The established model now contains 221 components and 1.17916 Jy
wmap "J2358-1020_X_1997_01_10_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9968 x 2.408 at -6.135 degrees (North through East)
! Clean map  min=-0.0028245  max=1.117 Jy/beam
! Writing clean map to FITS file: J2358-1020_X_1997_01_10_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.11695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000550749 
device "J2358-1020_X_1997_01_10_pus\_map.eps/VPS"
! Attempting to open device: 'J2358-1020_X_1997_01_10_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.147925 0.147925 0.295849 0.591699 1.1834 2.36679 4.73359 9.46718 18.9344 37.8687 75.7374
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.116 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9968 x 2.408 at -6.135 degrees (North through East)
! Clean map  min=-0.0028245  max=1.117 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2358-1020_X_1997_01_10_pus\_map.gif/vgif"
! Attempting to open device: 'J2358-1020_X_1997_01_10_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J2358-1020_X_1997_01_10_pus_uvs.log closed on Mon Jan 30 11:24:31 2006