! Started logfile: J2246-1206_X_1997_01_10_pus_uvs.log on Mon Jan 30 11:20:40 2006 obs J2246-1206_X_1997_01_10_pus_uva.fits ! Reading UV FITS file: J2246-1206_X_1997_01_10_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764198 visibilities/baseline/integration-bin. ! Found source: J2246-1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 497 lines of history. ! ! Reading 2476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.71488 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7545 mas, bmaj=1.96 mas, bpa=-2.536 degrees ! Estimated noise=1.63373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.23261 Jy ! Component: 100 - total flux cleaned = 1.54438 Jy ! Total flux subtracted in 100 components = 1.54438 Jy ! Clean residual min=-0.141038 max=0.183991 Jy/beam ! Clean residual mean=0.000508 rms=0.035950 Jy/beam ! Combined flux in latest and established models = 1.54438 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.54438 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.780088Jy sigma=10.398183 ! Fit after self-cal, rms=0.679161Jy sigma=8.912299 ! Inverting map and beam ! Estimated beam: bmin=0.7544 mas, bmaj=1.961 mas, bpa=-2.556 degrees ! Estimated noise=1.63277 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9614 mas, bmaj=2.296 mas, bpa=1.232 degrees ! Estimated noise=1.0639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.244469 Jy ! Component: 100 - total flux cleaned = 0.345611 Jy ! Component: 150 - total flux cleaned = 0.379387 Jy ! Component: 200 - total flux cleaned = 0.387783 Jy ! Total flux subtracted in 200 components = 0.387783 Jy ! Clean residual min=-0.079202 max=0.095511 Jy/beam ! Clean residual mean=-0.000408 rms=0.023670 Jy/beam ! Combined flux in latest and established models = 1.93216 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 1.93216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.630889Jy sigma=7.921080 ! Fit after self-cal, rms=0.629509Jy sigma=7.899020 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9614 x 2.296 at 1.232 degrees (North through East) ! Clean map min=-0.077553 max=1.4883 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.977748 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 1.41 KP 0.92 ! LA 0.95 MK 0.83 NL 1.21 OV 0.86 ! PT 1.24 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980027 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 1.37 KP 0.90 ! LA 0.95 MK 0.83 NL 1.19 OV 0.90 ! PT 1.22 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.962784 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 1.43 KP 0.91 ! LA 0.96 MK 0.86 NL 1.21 OV 0.85 ! PT 1.24 SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.934967 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HN 1.71 KP 0.89 ! LA 0.97 MK 0.83 NL 1.22 OV 0.86 ! PT 1.25 SC 1.09 ! ! ! Fit before self-cal, rms=0.629509Jy sigma=7.899020 ! Fit after self-cal, rms=0.512693Jy sigma=6.723225 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512693Jy sigma=6.723225 ! Fit after self-cal, rms=0.511300Jy sigma=6.701587 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9504 mas, bmaj=2.286 mas, bpa=-1.282 degrees ! Estimated noise=0.972805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.104639 Jy ! Component: 100 - total flux cleaned = -0.115163 Jy ! Component: 150 - total flux cleaned = -0.122944 Jy ! Component: 200 - total flux cleaned = -0.127291 Jy ! Total flux subtracted in 200 components = -0.127291 Jy ! Clean residual min=-0.032441 max=0.040545 Jy/beam ! Clean residual mean=0.000066 rms=0.009172 Jy/beam ! Combined flux in latest and established models = 1.80487 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 1.80487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.490604Jy sigma=6.384893 ! Fit after self-cal, rms=0.489534Jy sigma=6.362722 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489534Jy sigma=6.362722 ! Fit after self-cal, rms=0.198277Jy sigma=2.541290 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 3.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439763 Jy ! Component: 100 - total flux cleaned = 0.0439655 Jy ! Component: 150 - total flux cleaned = 0.0448463 Jy ! Component: 200 - total flux cleaned = 0.0448754 Jy ! Total flux subtracted in 200 components = 0.0448754 Jy ! Clean residual min=-0.030779 max=0.027209 Jy/beam ! Clean residual mean=-0.000046 rms=0.006632 Jy/beam ! Combined flux in latest and established models = 1.84975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 1.84975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187618Jy sigma=2.310893 ! Fit after self-cal, rms=0.178551Jy sigma=2.204129 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9504 x 2.286 at -1.282 degrees (North through East) ! Clean map min=-0.030778 max=1.4369 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178551Jy sigma=2.204129 ! Fit after self-cal, rms=0.107001Jy sigma=1.456105 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107001Jy sigma=1.456105 ! Fit after self-cal, rms=0.105870Jy sigma=1.443497 ! Inverting map and beam ! Estimated beam: bmin=0.9401 mas, bmaj=2.26 mas, bpa=-1.247 degrees ! Estimated noise=0.963168 mJy/beam. ! Added new window around map position (5.2, 8.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310043 Jy ! Component: 100 - total flux cleaned = 0.0440563 Jy ! Component: 150 - total flux cleaned = 0.0471547 Jy ! Component: 200 - total flux cleaned = 0.048712 Jy ! Total flux subtracted in 200 components = 0.048712 Jy ! Clean residual min=-0.018565 max=0.015517 Jy/beam ! Clean residual mean=-0.000005 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 1.89846 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 1.89846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096052Jy sigma=1.268950 ! Fit after self-cal, rms=0.094335Jy sigma=1.246455 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094335Jy sigma=1.246455 ! Fit after self-cal, rms=0.091489Jy sigma=1.185189 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091489Jy sigma=1.185189 ! Fit after self-cal, rms=0.091420Jy sigma=1.184641 ! Inverting map and beam ! Estimated beam: bmin=0.9365 mas, bmaj=2.249 mas, bpa=-1.051 degrees ! Estimated noise=0.9615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122918 Jy ! Component: 100 - total flux cleaned = 0.0205212 Jy ! Component: 150 - total flux cleaned = 0.0234277 Jy ! Component: 200 - total flux cleaned = 0.025555 Jy ! Total flux subtracted in 200 components = 0.025555 Jy ! Clean residual min=-0.016476 max=0.013063 Jy/beam ! Clean residual mean=-0.000015 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 1.92401 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 1.92401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087194Jy sigma=1.105254 ! Fit after self-cal, rms=0.086306Jy sigma=1.094720 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=4.039 mas, bpa=10.08 degrees ! Estimated noise=1.22107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486916 Jy ! Component: 100 - total flux cleaned = 0.00368096 Jy ! Component: 150 - total flux cleaned = 0.00603256 Jy ! Component: 200 - total flux cleaned = 0.00660565 Jy ! Total flux subtracted in 200 components = 0.00660565 Jy ! Clean residual min=-0.017695 max=0.010750 Jy/beam ! Clean residual mean=-0.000011 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 1.93062 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 1.93062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085120Jy sigma=1.079225 ! Fit after self-cal, rms=0.084512Jy sigma=1.069173 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7442 mas, bmaj=1.945 mas, bpa=-3.182 degrees ! Estimated noise=1.51523 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.22991 Jy ! Component: 100 - total flux cleaned = 1.53997 Jy ! Component: 150 - total flux cleaned = 1.68512 Jy ! Component: 200 - total flux cleaned = 1.76773 Jy ! Total flux subtracted in 200 components = 1.76773 Jy ! Clean residual min=-0.023922 max=0.037800 Jy/beam ! Clean residual mean=0.000260 rms=0.006597 Jy/beam ! Combined flux in latest and established models = 1.76773 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.76773 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9365 mas, bmaj=2.249 mas, bpa=-1.051 degrees ! Estimated noise=0.9615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665883 Jy ! Component: 100 - total flux cleaned = 0.107356 Jy ! Component: 150 - total flux cleaned = 0.123678 Jy ! Component: 200 - total flux cleaned = 0.137062 Jy ! Total flux subtracted in 200 components = 0.137062 Jy ! Clean residual min=-0.018290 max=0.015042 Jy/beam ! Clean residual mean=0.000065 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 1.90479 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 48 components and 1.90479 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=4.039 mas, bpa=10.08 degrees ! Estimated noise=1.22107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191322 Jy ! Component: 100 - total flux cleaned = 0.0236936 Jy ! Component: 150 - total flux cleaned = 0.026903 Jy ! Component: 200 - total flux cleaned = 0.028851 Jy ! Total flux subtracted in 200 components = 0.028851 Jy ! Clean residual min=-0.016433 max=0.010529 Jy/beam ! Clean residual mean=-0.000010 rms=0.003126 Jy/beam ! Combined flux in latest and established models = 1.93364 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 74 components and 1.93364 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9365 mas, bmaj=2.249 mas, bpa=-1.051 degrees ! Estimated noise=0.9615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142476 Jy ! Component: 100 - total flux cleaned = 0.00142684 Jy ! Component: 150 - total flux cleaned = 0.00269386 Jy ! Component: 200 - total flux cleaned = 0.00305513 Jy ! Total flux subtracted in 200 components = 0.00305513 Jy ! Clean residual min=-0.016501 max=0.012764 Jy/beam ! Clean residual mean=-0.000003 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 1.9367 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 1.9367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084641Jy sigma=1.069048 ! Fit after self-cal, rms=0.083800Jy sigma=1.055575 wmodel J2246-1206_X_1997_01_10_pus\_map.mod ! Writing 91 model components to file: J2246-1206_X_1997_01_10_pus_map.mod wobs J2246-1206_X_1997_01_10_pus\_uvs.fits ! Writing UV FITS file: J2246-1206_X_1997_01_10_pus_uvs.fits wwins J2246-1206_X_1997_01_10_pus\_map.win ! wwins: Wrote 3 windows to J2246-1206_X_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00597375 Jy ! Component: 100 - total flux cleaned = -0.00558472 Jy ! Component: 150 - total flux cleaned = -0.00614432 Jy ! Component: 200 - total flux cleaned = -0.00649108 Jy ! Component: 250 - total flux cleaned = -0.00681991 Jy ! Component: 300 - total flux cleaned = -0.00620717 Jy ! Component: 350 - total flux cleaned = -0.00516912 Jy ! Component: 400 - total flux cleaned = -0.00402376 Jy ! Component: 450 - total flux cleaned = -0.00278538 Jy ! Component: 500 - total flux cleaned = -0.00185718 Jy ! Component: 550 - total flux cleaned = -0.000956398 Jy ! Component: 600 - total flux cleaned = -0.00033487 Jy ! Component: 650 - total flux cleaned = 0.000384168 Jy ! Component: 700 - total flux cleaned = 0.000966864 Jy ! Component: 750 - total flux cleaned = 0.00165183 Jy ! Component: 800 - total flux cleaned = 0.00253577 Jy ! Component: 850 - total flux cleaned = 0.0029626 Jy ! Component: 900 - total flux cleaned = 0.00348616 Jy ! Component: 950 - total flux cleaned = 0.00399458 Jy ! Component: 1000 - total flux cleaned = 0.00439316 Jy ! Component: 1050 - total flux cleaned = 0.00497406 Jy ! Component: 1100 - total flux cleaned = 0.00544776 Jy ! Component: 1150 - total flux cleaned = 0.00581869 Jy ! Component: 1200 - total flux cleaned = 0.00609092 Jy ! Component: 1250 - total flux cleaned = 0.00662566 Jy ! Component: 1300 - total flux cleaned = 0.0069711 Jy ! Component: 1350 - total flux cleaned = 0.00731156 Jy ! Component: 1400 - total flux cleaned = 0.00756142 Jy ! Component: 1450 - total flux cleaned = 0.00805245 Jy ! Component: 1500 - total flux cleaned = 0.00829232 Jy ! Component: 1550 - total flux cleaned = 0.00844907 Jy ! Component: 1600 - total flux cleaned = 0.00867846 Jy ! Component: 1650 - total flux cleaned = 0.00860369 Jy ! Component: 1700 - total flux cleaned = 0.00882687 Jy ! Component: 1750 - total flux cleaned = 0.00897263 Jy ! Component: 1800 - total flux cleaned = 0.00883108 Jy ! Component: 1850 - total flux cleaned = 0.00890118 Jy ! Component: 1900 - total flux cleaned = 0.00890118 Jy ! Component: 1950 - total flux cleaned = 0.00869857 Jy ! Component: 2000 - total flux cleaned = 0.0085662 Jy ! Total flux subtracted in 2048 components = 0.00837066 Jy ! Clean residual min=-0.003998 max=0.003440 Jy/beam ! Clean residual mean=-0.000020 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 1.94507 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 221 components and 1.94507 Jy wmap "J2246-1206_X_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9365 x 2.249 at -1.051 degrees (North through East) ! Clean map min=-0.008176 max=1.4448 Jy/beam ! Writing clean map to FITS file: J2246-1206_X_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.44478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00119401 device "J2246-1206_X_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J2246-1206_X_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.247929 0.247929 0.495858 0.991715 1.98343 3.96686 7.93372 15.8674 31.7349 63.4698 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.444 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9365 x 2.249 at -1.051 degrees (North through East) ! Clean map min=-0.008176 max=1.4448 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2246-1206_X_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J2246-1206_X_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2246-1206_X_1997_01_10_pus_uvs.log closed on Mon Jan 30 11:21:12 2006