! Started logfile: J1354-0206_X_1997_01_10_pus_uvs.log on Sun Jan 29 10:37:57 2006 obs J1354-0206_X_1997_01_10_pus_uva.fits ! Reading UV FITS file: J1354-0206_X_1997_01_10_pus_uva.fits ! AN table 1: 204 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.54793 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 493 lines of history. ! ! Reading 20120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.566847 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7915 mas, bmaj=1.84 mas, bpa=-2.758 degrees ! Estimated noise=945.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.430535 Jy ! Component: 100 - total flux cleaned = 0.500437 Jy ! Total flux subtracted in 100 components = 0.500437 Jy ! Clean residual min=-0.039890 max=0.046908 Jy/beam ! Clean residual mean=-0.001154 rms=0.012568 Jy/beam ! Combined flux in latest and established models = 0.500437 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.500438 Jy ! ! Correcting IF 1. ! A total of 533 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 533 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 533 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 533 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.283527Jy sigma=0.001882 ! Fit after self-cal, rms=0.267030Jy sigma=0.001760 ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=1.84 mas, bpa=-2.758 degrees ! Estimated noise=945.434 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9722 mas, bmaj=2.208 mas, bpa=-3.602 degrees ! Estimated noise=698.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.031332 Jy ! Component: 100 - total flux cleaned = 0.0342807 Jy ! Component: 150 - total flux cleaned = 0.0343034 Jy ! Component: 200 - total flux cleaned = 0.0347565 Jy ! Total flux subtracted in 200 components = 0.0347565 Jy ! Clean residual min=-0.042969 max=0.034331 Jy/beam ! Clean residual mean=-0.003346 rms=0.009842 Jy/beam ! Combined flux in latest and established models = 0.535194 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.535194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264913Jy sigma=0.001728 ! Fit after self-cal, rms=0.264675Jy sigma=0.001726 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9722 x 2.208 at -3.602 degrees (North through East) ! Clean map min=-0.040133 max=0.52046 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.964288 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 1.32 KP 1.00* ! LA 0.89 MK 0.94 NL 1.15 OV 0.84 ! PT 1.47 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.953143 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.85 HN 1.36 KP 1.00* ! LA 0.89 MK 0.93 NL 1.17 OV 0.87 ! PT 1.48 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.938532 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.87 HN 1.42 KP 1.00* ! LA 0.90 MK 0.95 NL 1.21 OV 0.84 ! PT 1.49 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.925518 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.87 HN 1.49 KP 1.00* ! LA 0.93 MK 0.96 NL 1.22 OV 0.84 ! PT 1.51 SC 1.03 ! ! ! Fit before self-cal, rms=0.264675Jy sigma=0.001726 ! Fit after self-cal, rms=0.251502Jy sigma=0.001546 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251502Jy sigma=0.001546 ! Fit after self-cal, rms=0.251428Jy sigma=0.001544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9785 mas, bmaj=2.189 mas, bpa=-3.553 degrees ! Estimated noise=602.573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0481446 Jy ! Component: 100 - total flux cleaned = -0.0532871 Jy ! Component: 150 - total flux cleaned = -0.0542002 Jy ! Component: 200 - total flux cleaned = -0.0535279 Jy ! Total flux subtracted in 200 components = -0.0535279 Jy ! Clean residual min=-0.006462 max=0.008090 Jy/beam ! Clean residual mean=0.000034 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.481666 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.481666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244941Jy sigma=0.001471 ! Fit after self-cal, rms=0.244821Jy sigma=0.001469 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244821Jy sigma=0.001469 ! Fit after self-cal, rms=0.227028Jy sigma=0.001255 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790822 Jy ! Component: 100 - total flux cleaned = 0.00869338 Jy ! Component: 150 - total flux cleaned = 0.00879009 Jy ! Component: 200 - total flux cleaned = 0.00887588 Jy ! Total flux subtracted in 200 components = 0.00887587 Jy ! Clean residual min=-0.005515 max=0.005219 Jy/beam ! Clean residual mean=-0.000049 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.490542 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.490542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226895Jy sigma=0.001253 ! Fit after self-cal, rms=0.225972Jy sigma=0.001244 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9785 x 2.189 at -3.553 degrees (North through East) ! Clean map min=-0.0053553 max=0.47166 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225972Jy sigma=0.001244 ! Fit after self-cal, rms=0.232618Jy sigma=0.001233 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232618Jy sigma=0.001233 ! Fit after self-cal, rms=0.232458Jy sigma=0.001231 ! Inverting map and beam ! Estimated beam: bmin=0.9762 mas, bmaj=2.168 mas, bpa=-3.062 degrees ! Estimated noise=600.857 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308903 Jy ! Component: 100 - total flux cleaned = 0.00340765 Jy ! Component: 150 - total flux cleaned = 0.00366167 Jy ! Component: 200 - total flux cleaned = 0.00380448 Jy ! Total flux subtracted in 200 components = 0.00380448 Jy ! Clean residual min=-0.004157 max=0.003805 Jy/beam ! Clean residual mean=0.000126 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.494347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.494347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232387Jy sigma=0.001231 ! Fit after self-cal, rms=0.232327Jy sigma=0.001230 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232327Jy sigma=0.001230 ! Fit after self-cal, rms=0.232733Jy sigma=0.001228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232733Jy sigma=0.001228 ! Fit after self-cal, rms=0.232716Jy sigma=0.001228 ! Inverting map and beam ! Estimated beam: bmin=0.9736 mas, bmaj=2.156 mas, bpa=-2.893 degrees ! Estimated noise=600.734 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263099 Jy ! Component: 100 - total flux cleaned = 0.00287349 Jy ! Component: 150 - total flux cleaned = 0.00300596 Jy ! Component: 200 - total flux cleaned = 0.00317834 Jy ! Total flux subtracted in 200 components = 0.00317834 Jy ! Clean residual min=-0.003733 max=0.003545 Jy/beam ! Clean residual mean=0.000142 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.497525 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.497525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232671Jy sigma=0.001227 ! Fit after self-cal, rms=0.232651Jy sigma=0.001227 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=3.579 mas, bpa=12.67 degrees ! Estimated noise=754.389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141057 Jy ! Component: 100 - total flux cleaned = 0.00141914 Jy ! Component: 150 - total flux cleaned = 0.00145021 Jy ! Component: 200 - total flux cleaned = 0.00150232 Jy ! Total flux subtracted in 200 components = 0.00150232 Jy ! Clean residual min=-0.003623 max=0.004021 Jy/beam ! Clean residual mean=0.000263 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.499027 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.499027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232648Jy sigma=0.001227 ! Fit after self-cal, rms=0.232622Jy sigma=0.001227 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7919 mas, bmaj=1.806 mas, bpa=-1.87 degrees ! Estimated noise=844.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.401417 Jy ! Component: 100 - total flux cleaned = 0.467268 Jy ! Component: 150 - total flux cleaned = 0.491423 Jy ! Component: 200 - total flux cleaned = 0.496543 Jy ! Total flux subtracted in 200 components = 0.496543 Jy ! Clean residual min=-0.006102 max=0.008550 Jy/beam ! Clean residual mean=0.000080 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.496543 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.496543 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9736 mas, bmaj=2.156 mas, bpa=-2.893 degrees ! Estimated noise=600.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549589 Jy ! Component: 100 - total flux cleaned = 0.00531768 Jy ! Component: 150 - total flux cleaned = 0.00530198 Jy ! Component: 200 - total flux cleaned = 0.00529815 Jy ! Total flux subtracted in 200 components = 0.00529815 Jy ! Clean residual min=-0.003958 max=0.003235 Jy/beam ! Clean residual mean=0.000109 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.501841 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.501841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=3.579 mas, bpa=12.67 degrees ! Estimated noise=754.389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701773 Jy ! Component: 100 - total flux cleaned = -0.000905878 Jy ! Component: 150 - total flux cleaned = -0.00114533 Jy ! Component: 200 - total flux cleaned = -0.00136459 Jy ! Total flux subtracted in 200 components = -0.00136459 Jy ! Clean residual min=-0.003320 max=0.003283 Jy/beam ! Clean residual mean=0.000259 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.500476 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.500476 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9736 mas, bmaj=2.156 mas, bpa=-2.893 degrees ! Estimated noise=600.734 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666711 Jy ! Component: 100 - total flux cleaned = 0.000583378 Jy ! Component: 150 - total flux cleaned = 0.000506152 Jy ! Component: 200 - total flux cleaned = 0.000359387 Jy ! Total flux subtracted in 200 components = 0.000359387 Jy ! Clean residual min=-0.003193 max=0.003124 Jy/beam ! Clean residual mean=0.000128 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.500835 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.500836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232648Jy sigma=0.001226 ! Fit after self-cal, rms=0.232650Jy sigma=0.001226 wmodel J1354-0206_X_1997_01_10_pus\_map.mod ! Writing 60 model components to file: J1354-0206_X_1997_01_10_pus_map.mod wobs J1354-0206_X_1997_01_10_pus\_uvs.fits ! Writing UV FITS file: J1354-0206_X_1997_01_10_pus_uvs.fits wwins J1354-0206_X_1997_01_10_pus\_map.win ! wwins: Wrote 2 windows to J1354-0206_X_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000525187 Jy ! Component: 100 - total flux cleaned = -0.000526962 Jy ! Component: 150 - total flux cleaned = -0.00026894 Jy ! Component: 200 - total flux cleaned = -7.0862e-05 Jy ! Component: 250 - total flux cleaned = 8.01844e-05 Jy ! Component: 300 - total flux cleaned = 0.000261948 Jy ! Component: 350 - total flux cleaned = 0.000437826 Jy ! Component: 400 - total flux cleaned = 0.000605986 Jy ! Component: 450 - total flux cleaned = 0.00086615 Jy ! Component: 500 - total flux cleaned = 0.0010239 Jy ! Component: 550 - total flux cleaned = 0.00123948 Jy ! Component: 600 - total flux cleaned = 0.00147999 Jy ! Component: 650 - total flux cleaned = 0.00180149 Jy ! Component: 700 - total flux cleaned = 0.00205719 Jy ! Component: 750 - total flux cleaned = 0.00233493 Jy ! Component: 800 - total flux cleaned = 0.00255264 Jy ! Component: 850 - total flux cleaned = 0.00276646 Jy ! Component: 900 - total flux cleaned = 0.00300163 Jy ! Component: 950 - total flux cleaned = 0.0032317 Jy ! Component: 1000 - total flux cleaned = 0.00345652 Jy ! Total flux subtracted in 1024 components = 0.00355491 Jy ! Clean residual min=-0.001407 max=0.001226 Jy/beam ! Clean residual mean=0.000093 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.504391 Jy keep ! Adding 58 model components to the UV plane model. ! The established model now contains 118 components and 0.50439 Jy wmap "J1354-0206_X_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9736 x 2.156 at -2.893 degrees (North through East) ! Clean map min=-0.0026776 max=0.46609 Jy/beam ! Writing clean map to FITS file: J1354-0206_X_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.466089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000485997 device "J1354-0206_X_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J1354-0206_X_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.312814 0.312814 0.625628 1.25126 2.50251 5.00503 10.0101 20.0201 40.0402 80.0804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.466 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9736 x 2.156 at -2.893 degrees (North through East) ! Clean map min=-0.0026776 max=0.46609 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1354-0206_X_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J1354-0206_X_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J1354-0206_X_1997_01_10_pus_uvs.log closed on Sun Jan 29 10:38:17 2006