! Started logfile: J0730-1141_S_1997_01_10_pus_uvs.log on Mon Jan 30 00:25:18 2006 obs J0730-1141_S_1997_01_10_pus_uva.fits ! Reading UV FITS file: J0730-1141_S_1997_01_10_pus_uva.fits ! AN table 1: 135 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974156 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 566 lines of history. ! ! Reading 23672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.25499 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=7.045 mas, bpa=-3.607 degrees ! Estimated noise=1273.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.79431 Jy ! Component: 100 - total flux cleaned = 2.15941 Jy ! Total flux subtracted in 100 components = 2.15941 Jy ! Clean residual min=-0.131893 max=0.178054 Jy/beam ! Clean residual mean=-0.000125 rms=0.033272 Jy/beam ! Combined flux in latest and established models = 2.15941 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.15941 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.731949Jy sigma=0.003838 ! Fit after self-cal, rms=0.659707Jy sigma=0.003388 ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=7.043 mas, bpa=-3.617 degrees ! Estimated noise=1273.08 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=8.689 mas, bpa=-5.556 degrees ! Estimated noise=840.922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.163212 Jy ! Component: 100 - total flux cleaned = 0.186808 Jy ! Component: 150 - total flux cleaned = 0.188465 Jy ! Component: 200 - total flux cleaned = 0.188323 Jy ! Total flux subtracted in 200 components = 0.188323 Jy ! Clean residual min=-0.057808 max=0.071266 Jy/beam ! Clean residual mean=-0.000681 rms=0.020624 Jy/beam ! Combined flux in latest and established models = 2.34773 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 2.34773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.629247Jy sigma=0.003217 ! Fit after self-cal, rms=0.627069Jy sigma=0.003205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 8.689 at -5.556 degrees (North through East) ! Clean map min=-0.056597 max=2.1282 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00853 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.14 KP 0.85 ! LA 0.98 MK 0.98 NL 1.00* OV 1.05 ! PT 1.08 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972074 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.09 HN 1.27 KP 0.97 ! LA 1.08 MK 1.02 NL 0.88 OV 1.00 ! PT 1.05 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03454 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.08 KP 0.85 ! LA 0.79 MK 0.88 NL 0.90 OV 0.92 ! PT 1.24 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972633 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.24 KP 0.92 ! LA 0.88 MK 1.02 NL 0.96 OV 1.08 ! PT 1.13 SC 1.01 ! ! ! Fit before self-cal, rms=0.627069Jy sigma=0.003205 ! Fit after self-cal, rms=0.533036Jy sigma=0.002716 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533036Jy sigma=0.002716 ! Fit after self-cal, rms=0.531297Jy sigma=0.002705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=8.434 mas, bpa=-4.932 degrees ! Estimated noise=825.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.054773 Jy ! Component: 100 - total flux cleaned = 0.0575335 Jy ! Component: 150 - total flux cleaned = 0.0595485 Jy ! Component: 200 - total flux cleaned = 0.0600626 Jy ! Total flux subtracted in 200 components = 0.0600626 Jy ! Clean residual min=-0.017731 max=0.026738 Jy/beam ! Clean residual mean=-0.000142 rms=0.005590 Jy/beam ! Combined flux in latest and established models = 2.40779 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 2.40779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526261Jy sigma=0.002675 ! Fit after self-cal, rms=0.524238Jy sigma=0.002661 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524238Jy sigma=0.002661 ! Fit after self-cal, rms=0.384421Jy sigma=0.001774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267895 Jy ! Component: 100 - total flux cleaned = 0.0317604 Jy ! Component: 150 - total flux cleaned = 0.0328111 Jy ! Component: 200 - total flux cleaned = 0.0332779 Jy ! Total flux subtracted in 200 components = 0.0332779 Jy ! Clean residual min=-0.017241 max=0.018247 Jy/beam ! Clean residual mean=-0.000292 rms=0.005049 Jy/beam ! Combined flux in latest and established models = 2.44107 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 2.44107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382663Jy sigma=0.001762 ! Fit after self-cal, rms=0.376174Jy sigma=0.001721 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.282 x 8.434 at -4.932 degrees (North through East) ! Clean map min=-0.018265 max=2.1425 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376174Jy sigma=0.001721 ! Fit after self-cal, rms=0.350062Jy sigma=0.001556 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350062Jy sigma=0.001556 ! Fit after self-cal, rms=0.348867Jy sigma=0.001548 ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.399 mas, bpa=-4.665 degrees ! Estimated noise=820.81 mJy/beam. ! Added new window around map position (5, 39.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192179 Jy ! Component: 100 - total flux cleaned = 0.0267702 Jy ! Component: 150 - total flux cleaned = 0.0290802 Jy ! Component: 200 - total flux cleaned = 0.0303518 Jy ! Total flux subtracted in 200 components = 0.0303518 Jy ! Clean residual min=-0.008959 max=0.009821 Jy/beam ! Clean residual mean=0.000090 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 2.47142 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 82 components and 2.47142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347667Jy sigma=0.001541 ! Fit after self-cal, rms=0.347296Jy sigma=0.001539 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347296Jy sigma=0.001539 ! Fit after self-cal, rms=0.346243Jy sigma=0.001524 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346243Jy sigma=0.001524 ! Fit after self-cal, rms=0.346164Jy sigma=0.001523 ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.384 mas, bpa=-4.617 degrees ! Estimated noise=820.536 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581652 Jy ! Component: 100 - total flux cleaned = 0.00643856 Jy ! Component: 150 - total flux cleaned = 0.00748912 Jy ! Component: 200 - total flux cleaned = 0.00772101 Jy ! Total flux subtracted in 200 components = 0.00772101 Jy ! Clean residual min=-0.008357 max=0.009275 Jy/beam ! Clean residual mean=0.000097 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 2.47914 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 2.47914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345727Jy sigma=0.001521 ! Fit after self-cal, rms=0.345672Jy sigma=0.001520 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=15.16 mas, bpa=6.292 degrees ! Estimated noise=1038.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525067 Jy ! Component: 100 - total flux cleaned = 0.00672895 Jy ! Component: 150 - total flux cleaned = 0.00718301 Jy ! Component: 200 - total flux cleaned = 0.00732166 Jy ! Total flux subtracted in 200 components = 0.00732166 Jy ! Clean residual min=-0.008691 max=0.009434 Jy/beam ! Clean residual mean=0.000127 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 2.48646 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 2.48646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345584Jy sigma=0.001520 ! Fit after self-cal, rms=0.345566Jy sigma=0.001520 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.949 mas, bpa=-2.889 degrees ! Estimated noise=1239.15 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.80505 Jy ! Component: 100 - total flux cleaned = 2.15208 Jy ! Component: 150 - total flux cleaned = 2.28962 Jy ! Component: 200 - total flux cleaned = 2.3606 Jy ! Total flux subtracted in 200 components = 2.3606 Jy ! Clean residual min=-0.019454 max=0.029221 Jy/beam ! Clean residual mean=0.000320 rms=0.005992 Jy/beam ! Combined flux in latest and established models = 2.3606 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.3606 Jy ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.384 mas, bpa=-4.617 degrees ! Estimated noise=820.536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0540493 Jy ! Component: 100 - total flux cleaned = 0.0856171 Jy ! Component: 150 - total flux cleaned = 0.0980625 Jy ! Component: 200 - total flux cleaned = 0.107275 Jy ! Total flux subtracted in 200 components = 0.107275 Jy ! Clean residual min=-0.013221 max=0.013688 Jy/beam ! Clean residual mean=0.000147 rms=0.003443 Jy/beam ! Combined flux in latest and established models = 2.46788 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 56 components and 2.46788 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=15.16 mas, bpa=6.292 degrees ! Estimated noise=1038.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139934 Jy ! Component: 100 - total flux cleaned = 0.0199811 Jy ! Component: 150 - total flux cleaned = 0.0229427 Jy ! Component: 200 - total flux cleaned = 0.0241239 Jy ! Total flux subtracted in 200 components = 0.0241239 Jy ! Clean residual min=-0.011516 max=0.010270 Jy/beam ! Clean residual mean=0.000120 rms=0.003479 Jy/beam ! Combined flux in latest and established models = 2.492 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 2.492 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.384 mas, bpa=-4.617 degrees ! Estimated noise=820.536 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106458 Jy ! Component: 100 - total flux cleaned = -0.0011062 Jy ! Component: 150 - total flux cleaned = -0.00147768 Jy ! Component: 200 - total flux cleaned = -0.00183241 Jy ! Total flux subtracted in 200 components = -0.00183241 Jy ! Clean residual min=-0.009863 max=0.010519 Jy/beam ! Clean residual mean=0.000060 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 2.49017 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 2.49017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346498Jy sigma=0.001524 ! Fit after self-cal, rms=0.346353Jy sigma=0.001523 wmodel J0730-1141_S_1997_01_10_pus\_map.mod ! Writing 106 model components to file: J0730-1141_S_1997_01_10_pus_map.mod wobs J0730-1141_S_1997_01_10_pus\_uvs.fits ! Writing UV FITS file: J0730-1141_S_1997_01_10_pus_uvs.fits wwins J0730-1141_S_1997_01_10_pus\_map.win ! wwins: Wrote 3 windows to J0730-1141_S_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178285 Jy ! Component: 100 - total flux cleaned = 0.00242606 Jy ! Component: 150 - total flux cleaned = 0.00301812 Jy ! Component: 200 - total flux cleaned = 0.00330144 Jy ! Component: 250 - total flux cleaned = 0.00316867 Jy ! Component: 300 - total flux cleaned = 0.00355439 Jy ! Component: 350 - total flux cleaned = 0.00405043 Jy ! Component: 400 - total flux cleaned = 0.00465638 Jy ! Component: 450 - total flux cleaned = 0.00547576 Jy ! Component: 500 - total flux cleaned = 0.00604191 Jy ! Component: 550 - total flux cleaned = 0.00681279 Jy ! Component: 600 - total flux cleaned = 0.00766543 Jy ! Component: 650 - total flux cleaned = 0.00839139 Jy ! Component: 700 - total flux cleaned = 0.00899795 Jy ! Component: 750 - total flux cleaned = 0.00929428 Jy ! Component: 800 - total flux cleaned = 0.00977763 Jy ! Component: 850 - total flux cleaned = 0.00996737 Jy ! Component: 900 - total flux cleaned = 0.0106193 Jy ! Component: 950 - total flux cleaned = 0.0109823 Jy ! Component: 1000 - total flux cleaned = 0.0115183 Jy ! Component: 1050 - total flux cleaned = 0.0119558 Jy ! Component: 1100 - total flux cleaned = 0.0122996 Jy ! Component: 1150 - total flux cleaned = 0.0128066 Jy ! Component: 1200 - total flux cleaned = 0.0132206 Jy ! Component: 1250 - total flux cleaned = 0.013787 Jy ! Component: 1300 - total flux cleaned = 0.0141843 Jy ! Component: 1350 - total flux cleaned = 0.0145746 Jy ! Component: 1400 - total flux cleaned = 0.0149577 Jy ! Component: 1450 - total flux cleaned = 0.0151844 Jy ! Component: 1500 - total flux cleaned = 0.0154806 Jy ! Component: 1550 - total flux cleaned = 0.015845 Jy ! Component: 1600 - total flux cleaned = 0.0161306 Jy ! Component: 1650 - total flux cleaned = 0.0166209 Jy ! Component: 1700 - total flux cleaned = 0.0168983 Jy ! Component: 1750 - total flux cleaned = 0.0172392 Jy ! Component: 1800 - total flux cleaned = 0.0177086 Jy ! Component: 1850 - total flux cleaned = 0.0179714 Jy ! Component: 1900 - total flux cleaned = 0.0181017 Jy ! Component: 1950 - total flux cleaned = 0.0186153 Jy ! Component: 2000 - total flux cleaned = 0.0189327 Jy ! Total flux subtracted in 2048 components = 0.0191827 Jy ! Clean residual min=-0.003290 max=0.003278 Jy/beam ! Clean residual mean=0.000012 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 2.50935 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 240 components and 2.50935 Jy wmap "J0730-1141_S_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 8.384 at -4.617 degrees (North through East) ! Clean map min=-0.0067612 max=2.1283 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.1283 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00126702 device "J0730-1141_S_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J0730-1141_S_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178596 0.178596 0.357192 0.714384 1.42877 2.85754 5.71508 11.4302 22.8603 45.7206 91.4412 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 8.384 at -4.617 degrees (North through East) ! Clean map min=-0.0067612 max=2.1283 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0730-1141_S_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J0730-1141_S_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0730-1141_S_1997_01_10_pus_uvs.log closed on Mon Jan 30 00:26:01 2006