! Started logfile: J0339-0146_X_1997_01_10_pus_uvs.log on Sat Jan 28 14:32:13 2006
obs J0339-0146_X_1997_01_10_pus_uva.fits
! Reading UV FITS file: J0339-0146_X_1997_01_10_pus_uva.fits
! AN table 1: 202 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.855006 visibilities/baseline/integration-bin.
! Found source: J0339-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15049e+09        8e+06          1        8e+06
!  02        2  8.23424e+09        8e+06          1        8e+06
!  03        3  8.41424e+09        8e+06          1        8e+06
!  04        4  8.55424e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 493 lines of history.
! 
! Reading 31088 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
float field_size
field_size = 256
float field_cell
field_cell = 0.2
float taper_size
taper_size = 70.
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 172 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 213 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 193 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.608134Jy  sigma=0.004114
! Fit after  self-cal, rms=0.480588Jy  sigma=0.003222
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7638 mas, bmaj=1.876 mas, bpa=-1.815 degrees
! Estimated noise=795.374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.727235 Jy
! Component: 100  -  total flux cleaned = 0.939596 Jy
! Total flux subtracted in 100 components = 0.939596 Jy
! Clean residual min=-0.074502 max=0.225865 Jy/beam
! Clean residual mean=0.001251 rms=0.030149 Jy/beam
! Combined flux in latest and established models = 0.939596 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.939596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.460003Jy  sigma=0.003168
! Fit after  self-cal, rms=0.459940Jy  sigma=0.003167
! Inverting map 
! Added new window around map position (1.4, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198601 Jy
! Component: 100  -  total flux cleaned = 0.30301 Jy
! Total flux subtracted in 100 components = 0.30301 Jy
! Clean residual min=-0.058731 max=0.135319 Jy/beam
! Clean residual mean=0.000050 rms=0.020213 Jy/beam
! Combined flux in latest and established models = 1.24261 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 1.24261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362034Jy  sigma=0.002307
! Fit after  self-cal, rms=0.347648Jy  sigma=0.002196
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9358 mas, bmaj=2.14 mas, bpa=-2.413 degrees
! Estimated noise=572.935 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106518 Jy
! Component: 100  -  total flux cleaned = 0.161836 Jy
! Component: 150  -  total flux cleaned = 0.195253 Jy
! Component: 200  -  total flux cleaned = 0.203758 Jy
! Total flux subtracted in 200 components = 0.203758 Jy
! Clean residual min=-0.044353 max=0.072952 Jy/beam
! Clean residual mean=-0.002551 rms=0.012401 Jy/beam
! Combined flux in latest and established models = 1.44636 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 1.44636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.319483Jy  sigma=0.001879
! Fit after  self-cal, rms=0.315965Jy  sigma=0.001849
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.91     HN        1.33     KP        0.90     
!   LA        0.96     MK        0.97     NL        1.15     OV        0.91     
!   PT        1.23     SC        0.92     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.90     HN        1.31     KP        0.89     
!   LA        0.94     MK        0.94     NL        1.13     OV        0.95     
!   PT        1.22     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.92     HN        1.37     KP        0.88     
!   LA        0.95     MK        0.93     NL        1.15     OV        0.90     
!   PT        1.23     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.91     HN        1.44     KP        0.89     
!   LA        0.97     MK        0.91     NL        1.15     OV        0.91     
!   PT        1.23     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.315965Jy  sigma=0.001849
! Fit after  self-cal, rms=0.269310Jy  sigma=0.001321
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9312 mas, bmaj=2.117 mas, bpa=-1.578 degrees
! Estimated noise=579.031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00741011 Jy
! Component: 100  -  total flux cleaned = -0.0104914 Jy
! Component: 150  -  total flux cleaned = -0.0127611 Jy
! Component: 200  -  total flux cleaned = -0.0141321 Jy
! Total flux subtracted in 200 components = -0.0141321 Jy
! Clean residual min=-0.017313 max=0.016412 Jy/beam
! Clean residual mean=0.000117 rms=0.004192 Jy/beam
! Combined flux in latest and established models = 1.43223 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 1.43223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.265284Jy  sigma=0.001284
! Fit after  self-cal, rms=0.265622Jy  sigma=0.001279
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.265622Jy  sigma=0.001279
! Fit after  self-cal, rms=0.265915Jy  sigma=0.001253
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9299 mas, bmaj=2.116 mas, bpa=-1.524 degrees
! Estimated noise=576.856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00303646 Jy
! Component: 100  -  total flux cleaned = -0.00349815 Jy
! Component: 150  -  total flux cleaned = -0.00384894 Jy
! Component: 200  -  total flux cleaned = -0.00415907 Jy
! Total flux subtracted in 200 components = -0.00415906 Jy
! Clean residual min=-0.011952 max=0.011824 Jy/beam
! Clean residual mean=0.000043 rms=0.003006 Jy/beam
! Combined flux in latest and established models = 1.42807 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 1.42807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264512Jy  sigma=0.001239
! Fit after  self-cal, rms=0.264445Jy  sigma=0.001237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740502 Jy
! Component: 100  -  total flux cleaned = 0.00935796 Jy
! Component: 150  -  total flux cleaned = 0.0100382 Jy
! Component: 200  -  total flux cleaned = 0.00975953 Jy
! Total flux subtracted in 200 components = 0.00975953 Jy
! Clean residual min=-0.010693 max=0.008833 Jy/beam
! Clean residual mean=-0.000033 rms=0.002445 Jy/beam
! Combined flux in latest and established models = 1.43783 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 1.43783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263435Jy  sigma=0.001225
! Fit after  self-cal, rms=0.263302Jy  sigma=0.001224
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263302Jy  sigma=0.001224
! Fit after  self-cal, rms=0.262358Jy  sigma=0.001222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9269 mas, bmaj=2.111 mas, bpa=-1.397 degrees
! Estimated noise=574.363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501155 Jy
! Component: 100  -  total flux cleaned = 0.00193783 Jy
! Component: 150  -  total flux cleaned = 0.00194008 Jy
! Component: 200  -  total flux cleaned = 0.00216385 Jy
! Total flux subtracted in 200 components = 0.00216385 Jy
! Clean residual min=-0.010558 max=0.007211 Jy/beam
! Clean residual mean=-0.000039 rms=0.002090 Jy/beam
! Combined flux in latest and established models = 1.44 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 1.44 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261734Jy  sigma=0.001217
! Fit after  self-cal, rms=0.261664Jy  sigma=0.001216
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116512 Jy
! Component: 100  -  total flux cleaned = 0.00201433 Jy
! Component: 150  -  total flux cleaned = 0.00219611 Jy
! Component: 200  -  total flux cleaned = 0.00219269 Jy
! Total flux subtracted in 200 components = 0.00219269 Jy
! Clean residual min=-0.009941 max=0.006475 Jy/beam
! Clean residual mean=-0.000059 rms=0.001890 Jy/beam
! Combined flux in latest and established models = 1.44219 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 1.44219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261344Jy  sigma=0.001213
! Fit after  self-cal, rms=0.261298Jy  sigma=0.001212
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261298Jy  sigma=0.001212
! Fit after  self-cal, rms=0.260508Jy  sigma=0.001211
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.251 mas, bmaj=3.373 mas, bpa=3.741 degrees
! Estimated noise=716.109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00163258 Jy
! Component: 100  -  total flux cleaned = -0.00101131 Jy
! Component: 150  -  total flux cleaned = -0.000507477 Jy
! Component: 200  -  total flux cleaned = -0.000446663 Jy
! Total flux subtracted in 200 components = -0.000446663 Jy
! Clean residual min=-0.004229 max=0.004369 Jy/beam
! Clean residual mean=-0.000082 rms=0.001385 Jy/beam
! Combined flux in latest and established models = 1.44174 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 1.44174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260352Jy  sigma=0.001211
! Fit after  self-cal, rms=0.260306Jy  sigma=0.001211
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226058 Jy
! Component: 100  -  total flux cleaned = 0.000422559 Jy
! Component: 150  -  total flux cleaned = 0.000776555 Jy
! Component: 200  -  total flux cleaned = 0.000890641 Jy
! Total flux subtracted in 200 components = 0.000890641 Jy
! Clean residual min=-0.004369 max=0.004263 Jy/beam
! Clean residual mean=-0.000097 rms=0.001388 Jy/beam
! Combined flux in latest and established models = 1.44263 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 1.44263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260210Jy  sigma=0.001210
! Fit after  self-cal, rms=0.260192Jy  sigma=0.001210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9258 mas, bmaj=2.107 mas, bpa=-1.278 degrees
! Estimated noise=573.05 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9258 x 2.107 at -1.278 degrees (North through East)
! Clean map  min=-0.0071006  max=0.87208 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260192Jy  sigma=0.001210
! Fit after  self-cal, rms=1.927373Jy  sigma=0.001113
! Inverting map and beam 
! Estimated beam: bmin=0.9261 mas, bmaj=2.108 mas, bpa=-1.185 degrees
! Estimated noise=573.66 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048314 Jy
! Component: 100  -  total flux cleaned = -0.00114321 Jy
! Component: 150  -  total flux cleaned = -0.00173326 Jy
! Component: 200  -  total flux cleaned = -0.00186904 Jy
! Total flux subtracted in 200 components = -0.00186904 Jy
! Clean residual min=-0.008725 max=0.005140 Jy/beam
! Clean residual mean=-0.000045 rms=0.001572 Jy/beam
! Combined flux in latest and established models = 1.44076 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 107 components and 1.44076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.927333Jy  sigma=0.001111
! Fit after  self-cal, rms=1.927321Jy  sigma=0.001111
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018294 Jy
! Component: 100  -  total flux cleaned = -0.000455784 Jy
! Component: 150  -  total flux cleaned = -0.000685565 Jy
! Component: 200  -  total flux cleaned = -0.000686555 Jy
! Total flux subtracted in 200 components = -0.000686555 Jy
! Clean residual min=-0.008144 max=0.004820 Jy/beam
! Clean residual mean=-0.000039 rms=0.001472 Jy/beam
! Combined flux in latest and established models = 1.44008 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 1.44008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.927284Jy  sigma=0.001109
! Fit after  self-cal, rms=1.927278Jy  sigma=0.001109
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.927278Jy  sigma=0.001109
! Fit after  self-cal, rms=1.836039Jy  sigma=0.001109
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7619 mas, bmaj=1.855 mas, bpa=-0.2912 degrees
! Estimated noise=785.72 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.720932 Jy
! Component: 100  -  total flux cleaned = 0.987925 Jy
! Component: 150  -  total flux cleaned = 1.13615 Jy
! Component: 200  -  total flux cleaned = 1.22268 Jy
! Total flux subtracted in 200 components = 1.22268 Jy
! Clean residual min=-0.019592 max=0.044707 Jy/beam
! Clean residual mean=0.000599 rms=0.008038 Jy/beam
! Combined flux in latest and established models = 1.22268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.22268 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9254 mas, bmaj=2.107 mas, bpa=-1.16 degrees
! Estimated noise=573.2 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0740655 Jy
! Component: 100  -  total flux cleaned = 0.119227 Jy
! Component: 150  -  total flux cleaned = 0.14911 Jy
! Component: 200  -  total flux cleaned = 0.169391 Jy
! Total flux subtracted in 200 components = 0.169391 Jy
! Clean residual min=-0.007671 max=0.017199 Jy/beam
! Clean residual mean=0.000382 rms=0.002933 Jy/beam
! Combined flux in latest and established models = 1.39207 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 61 components and 1.39207 Jy
! Inverting map 
! Added new window around map position (-1, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162896 Jy
! Component: 100  -  total flux cleaned = 0.0256022 Jy
! Component: 150  -  total flux cleaned = 0.0291731 Jy
! Component: 200  -  total flux cleaned = 0.0323634 Jy
! Total flux subtracted in 200 components = 0.0323634 Jy
! Clean residual min=-0.005678 max=0.005071 Jy/beam
! Clean residual mean=0.000094 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 1.42443 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 85 components and 1.42443 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=3.376 mas, bpa=3.8 degrees
! Estimated noise=716.303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760297 Jy
! Component: 100  -  total flux cleaned = 0.011617 Jy
! Component: 150  -  total flux cleaned = 0.0129987 Jy
! Component: 200  -  total flux cleaned = 0.0130851 Jy
! Total flux subtracted in 200 components = 0.0130851 Jy
! Clean residual min=-0.003544 max=0.004100 Jy/beam
! Clean residual mean=-0.000035 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 1.43752 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.96299e-05 Jy
! Component: 100  -  total flux cleaned = 0.000254206 Jy
! Component: 150  -  total flux cleaned = 0.000311846 Jy
! Component: 200  -  total flux cleaned = 0.000366072 Jy
! Total flux subtracted in 200 components = 0.000366072 Jy
! Clean residual min=-0.003459 max=0.003912 Jy/beam
! Clean residual mean=-0.000041 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 1.43788 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 125 components and 1.43788 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9254 mas, bmaj=2.107 mas, bpa=-1.16 degrees
! Estimated noise=573.2 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000449112 Jy
! Component: 100  -  total flux cleaned = -0.000175248 Jy
! Component: 150  -  total flux cleaned = 6.15031e-05 Jy
! Component: 200  -  total flux cleaned = 5.79007e-05 Jy
! Total flux subtracted in 200 components = 5.79007e-05 Jy
! Clean residual min=-0.004363 max=0.003795 Jy/beam
! Clean residual mean=-0.000018 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 1.43794 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 143 components and 1.43794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.835913Jy  sigma=0.001104
! Fit after  self-cal, rms=1.835863Jy  sigma=0.001104
wmodel J0339-0146_X_1997_01_10_pus_map.mod
! Writing 143 model components to file: J0339-0146_X_1997_01_10_pus_map.mod
wobs J0339-0146_X_1997_01_10_pus_uvs.fits
! Writing UV FITS file: J0339-0146_X_1997_01_10_pus_uvs.fits
wwins J0339-0146_X_1997_01_10_pus_map.win
! wwins: Wrote 4 windows to J0339-0146_X_1997_01_10_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198265 Jy
! Component: 100  -  total flux cleaned = -0.00311058 Jy
! Component: 150  -  total flux cleaned = -0.00371705 Jy
! Component: 200  -  total flux cleaned = -0.00411574 Jy
! Component: 250  -  total flux cleaned = -0.00422408 Jy
! Component: 300  -  total flux cleaned = -0.00427507 Jy
! Component: 350  -  total flux cleaned = -0.00422605 Jy
! Component: 400  -  total flux cleaned = -0.0040361 Jy
! Component: 450  -  total flux cleaned = -0.00385164 Jy
! Component: 500  -  total flux cleaned = -0.00362705 Jy
! Component: 550  -  total flux cleaned = -0.00353918 Jy
! Component: 600  -  total flux cleaned = -0.00332586 Jy
! Component: 650  -  total flux cleaned = -0.00328429 Jy
! Component: 700  -  total flux cleaned = -0.00316134 Jy
! Component: 750  -  total flux cleaned = -0.0030808 Jy
! Component: 800  -  total flux cleaned = -0.00300179 Jy
! Component: 850  -  total flux cleaned = -0.00284753 Jy
! Component: 900  -  total flux cleaned = -0.00284765 Jy
! Component: 950  -  total flux cleaned = -0.00273523 Jy
! Component: 1000  -  total flux cleaned = -0.00266182 Jy
! Total flux subtracted in 1024 components = -0.00262572 Jy
! Clean residual min=-0.002138 max=0.002868 Jy/beam
! Clean residual mean=0.000024 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 1.43531 Jy
keep
! Adding 71 model components to the UV plane model.
! The established model now contains 212 components and 1.43532 Jy
wmap "J0339-0146_X_1997_01_10_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9254 x 2.107 at -1.16 degrees (North through East)
! Clean map  min=-0.0070726  max=0.8727 Jy/beam
! Writing clean map to FITS file: J0339-0146_X_1997_01_10_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.872698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000769081 
device "J0339-0146_X_1997_01_10_pus\_map.eps/VPS"
! Attempting to open device: 'J0339-0146_X_1997_01_10_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.26438 0.26438 0.52876 1.05752 2.11504 4.23008 8.46017 16.9203 33.8407 67.6813
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0023 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.872 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9254 x 2.107 at -1.16 degrees (North through East)
! Clean map  min=-0.0070726  max=0.8727 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0339-0146_X_1997_01_10_pus\_map.gif/vgif"
! Attempting to open device: 'J0339-0146_X_1997_01_10_pus_map.gif/vgif'
mapplot cln
quit
! Quitting program
! Log file J0339-0146_X_1997_01_10_pus_uvs.log closed on Sat Jan 28 14:32:46 2006