! Started logfile: J0339-0146_S_1997_01_10_pus_uvs.log on Mon Jan 30 11:55:20 2006 obs J0339-0146_S_1997_01_10_pus_uve.fits ! Reading UV FITS file: J0339-0146_S_1997_01_10_pus_uve.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.941176 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 574 lines of history. ! ! Reading 2880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.0015 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=7.267 mas, bpa=-3.737 degrees ! Estimated noise=2.86101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.55305 Jy ! Component: 100 - total flux cleaned = 1.87812 Jy ! Total flux subtracted in 100 components = 1.87812 Jy ! Clean residual min=-0.101452 max=0.141931 Jy/beam ! Clean residual mean=0.000336 rms=0.033678 Jy/beam ! Combined flux in latest and established models = 1.87812 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.87812 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998866Jy sigma=11.883544 ! Fit after self-cal, rms=0.964412Jy sigma=6.842494 ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=7.266 mas, bpa=-3.727 degrees ! Estimated noise=2.86004 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.958 mas, bmaj=11.87 mas, bpa=-6.404 degrees ! Estimated noise=1.24194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00623496 Jy ! Component: 100 - total flux cleaned = -0.0162409 Jy ! Component: 150 - total flux cleaned = -0.0240536 Jy ! Component: 200 - total flux cleaned = -0.0287823 Jy ! Total flux subtracted in 200 components = -0.0287823 Jy ! Clean residual min=-0.065542 max=0.076286 Jy/beam ! Clean residual mean=-0.000411 rms=0.026274 Jy/beam ! Combined flux in latest and established models = 1.84934 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 19 components and 1.84934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.961356Jy sigma=6.721587 ! Fit after self-cal, rms=0.961824Jy sigma=6.721284 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.958 x 11.87 at -6.404 degrees (North through East) ! Clean map min=-0.06508 max=1.8326 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03678 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.03 KP 0.82 ! LA 0.99 MK 1.04 NL 1.00* OV 0.96 ! PT 1.05 SC 0.79 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01839 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.14 KP 0.96 ! LA 1.11 MK 0.92 NL 0.85 OV 0.95 ! PT 0.98 SC 0.85 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.06146 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.01 KP 0.83 ! LA 0.78 MK 0.94 NL 0.89 OV 0.88 ! PT 1.20 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00263 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.06 HN 1.12 KP 0.92 ! LA 0.88 MK 0.98 NL 0.95 OV 1.02 ! PT 1.10 SC 1.00 ! ! ! Fit before self-cal, rms=0.961824Jy sigma=6.721284 ! Fit after self-cal, rms=0.900255Jy sigma=6.394697 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.900255Jy sigma=6.394697 ! Fit after self-cal, rms=0.901020Jy sigma=6.393551 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.839 mas, bmaj=11.24 mas, bpa=-4.359 degrees ! Estimated noise=1.28543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832843 Jy ! Component: 100 - total flux cleaned = 0.0979154 Jy ! Component: 150 - total flux cleaned = 0.0979222 Jy ! Component: 200 - total flux cleaned = 0.0979541 Jy ! Total flux subtracted in 200 components = 0.0979541 Jy ! Clean residual min=-0.040029 max=0.051449 Jy/beam ! Clean residual mean=0.000289 rms=0.013083 Jy/beam ! Combined flux in latest and established models = 1.94729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 1.94729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.905372Jy sigma=6.310339 ! Fit after self-cal, rms=0.905706Jy sigma=6.310165 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.905706Jy sigma=6.310165 ! Fit after self-cal, rms=0.322340Jy sigma=2.169902 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650363 Jy ! Component: 100 - total flux cleaned = 0.0630633 Jy ! Component: 150 - total flux cleaned = 0.0598137 Jy ! Component: 200 - total flux cleaned = 0.0578402 Jy ! Total flux subtracted in 200 components = 0.0578402 Jy ! Clean residual min=-0.042301 max=0.038622 Jy/beam ! Clean residual mean=-0.000301 rms=0.017816 Jy/beam ! Combined flux in latest and established models = 2.00513 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 2.00513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313411Jy sigma=1.936425 ! Fit after self-cal, rms=0.252466Jy sigma=1.776047 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.839 x 11.24 at -4.359 degrees (North through East) ! Clean map min=-0.042017 max=1.9912 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252466Jy sigma=1.776047 ! Fit after self-cal, rms=0.209848Jy sigma=1.148095 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209848Jy sigma=1.148095 ! Fit after self-cal, rms=0.197272Jy sigma=1.111249 ! Inverting map and beam ! Estimated beam: bmin=5.602 mas, bmaj=11 mas, bpa=-5.54 degrees ! Estimated noise=1.27562 mJy/beam. ! Added new window around map position (0, -9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102306 Jy ! Component: 100 - total flux cleaned = 0.0131773 Jy ! Component: 150 - total flux cleaned = 0.0144253 Jy ! Component: 200 - total flux cleaned = 0.0151787 Jy ! Total flux subtracted in 200 components = 0.0151787 Jy ! Clean residual min=-0.010688 max=0.010151 Jy/beam ! Clean residual mean=-0.000191 rms=0.003499 Jy/beam ! Combined flux in latest and established models = 2.02031 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 2.02031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192570Jy sigma=1.072122 ! Fit after self-cal, rms=0.189409Jy sigma=1.060831 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189409Jy sigma=1.060831 ! Fit after self-cal, rms=0.175887Jy sigma=0.934411 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175887Jy sigma=0.934411 ! Fit after self-cal, rms=0.174858Jy sigma=0.930025 ! Inverting map and beam ! Estimated beam: bmin=5.559 mas, bmaj=10.95 mas, bpa=-5.716 degrees ! Estimated noise=1.27671 mJy/beam. ! Added new window around map position (1.5, 10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991926 Jy ! Component: 100 - total flux cleaned = 0.0103087 Jy ! Component: 150 - total flux cleaned = 0.0112186 Jy ! Component: 200 - total flux cleaned = 0.0120574 Jy ! Total flux subtracted in 200 components = 0.0120574 Jy ! Clean residual min=-0.008273 max=0.008745 Jy/beam ! Clean residual mean=-0.000107 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 2.03237 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 2.03237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172121Jy sigma=0.904806 ! Fit after self-cal, rms=0.171546Jy sigma=0.901718 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.57 mas, bmaj=15.57 mas, bpa=3.989 degrees ! Estimated noise=1.39021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148182 Jy ! Component: 100 - total flux cleaned = 0.00186804 Jy ! Component: 150 - total flux cleaned = 0.00236179 Jy ! Component: 200 - total flux cleaned = 0.00281073 Jy ! Total flux subtracted in 200 components = 0.00281073 Jy ! Clean residual min=-0.007751 max=0.008269 Jy/beam ! Clean residual mean=-0.000137 rms=0.002854 Jy/beam ! Combined flux in latest and established models = 2.03518 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 2.03518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170824Jy sigma=0.895916 ! Fit after self-cal, rms=0.170445Jy sigma=0.893762 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.147 mas, bpa=-3.251 degrees ! Estimated noise=2.74927 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.64878 Jy ! Component: 100 - total flux cleaned = 1.99134 Jy ! Component: 150 - total flux cleaned = 2.05479 Jy ! Component: 200 - total flux cleaned = 2.05483 Jy ! Total flux subtracted in 200 components = 2.05483 Jy ! Clean residual min=-0.025145 max=0.025590 Jy/beam ! Clean residual mean=-0.000060 rms=0.006508 Jy/beam ! Combined flux in latest and established models = 2.05483 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 2.05483 Jy ! Inverting map and beam ! Estimated beam: bmin=5.559 mas, bmaj=10.95 mas, bpa=-5.716 degrees ! Estimated noise=1.27671 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112142 Jy ! Component: 100 - total flux cleaned = -0.0147208 Jy ! Component: 150 - total flux cleaned = -0.0175559 Jy ! Component: 200 - total flux cleaned = -0.0188125 Jy ! Total flux subtracted in 200 components = -0.0188125 Jy ! Clean residual min=-0.011966 max=0.012097 Jy/beam ! Clean residual mean=-0.000147 rms=0.003825 Jy/beam ! Combined flux in latest and established models = 2.03602 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 2.03602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.57 mas, bmaj=15.57 mas, bpa=3.989 degrees ! Estimated noise=1.39021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196926 Jy ! Component: 100 - total flux cleaned = -0.002005 Jy ! Component: 150 - total flux cleaned = -0.00117479 Jy ! Component: 200 - total flux cleaned = -0.000646605 Jy ! Total flux subtracted in 200 components = -0.000646605 Jy ! Clean residual min=-0.010474 max=0.010147 Jy/beam ! Clean residual mean=-0.000159 rms=0.003487 Jy/beam ! Combined flux in latest and established models = 2.03537 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 2.03537 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.559 mas, bmaj=10.95 mas, bpa=-5.716 degrees ! Estimated noise=1.27671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146485 Jy ! Component: 100 - total flux cleaned = 0.00144611 Jy ! Component: 150 - total flux cleaned = 0.00105688 Jy ! Component: 200 - total flux cleaned = 0.000694976 Jy ! Total flux subtracted in 200 components = 0.000694976 Jy ! Clean residual min=-0.009537 max=0.010052 Jy/beam ! Clean residual mean=-0.000115 rms=0.002843 Jy/beam ! Combined flux in latest and established models = 2.03606 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 2.03606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170963Jy sigma=0.911291 ! Fit after self-cal, rms=0.170562Jy sigma=0.908239 wmodel J0339-0146_S_1997_01_10_pus\_map.mod ! Writing 100 model components to file: J0339-0146_S_1997_01_10_pus_map.mod wobs J0339-0146_S_1997_01_10_pus\_uvs.fits ! Writing UV FITS file: J0339-0146_S_1997_01_10_pus_uvs.fits wwins J0339-0146_S_1997_01_10_pus\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255488 Jy ! Component: 100 - total flux cleaned = 0.00299672 Jy ! Component: 150 - total flux cleaned = 0.00412383 Jy ! Component: 200 - total flux cleaned = 0.00589627 Jy ! Component: 250 - total flux cleaned = 0.00745528 Jy ! Component: 300 - total flux cleaned = 0.00872165 Jy ! Component: 350 - total flux cleaned = 0.00962589 Jy ! Component: 400 - total flux cleaned = 0.010011 Jy ! Component: 450 - total flux cleaned = 0.0102909 Jy ! Component: 500 - total flux cleaned = 0.0103808 Jy ! Component: 550 - total flux cleaned = 0.010825 Jy ! Component: 600 - total flux cleaned = 0.011172 Jy ! Component: 650 - total flux cleaned = 0.0110858 Jy ! Component: 700 - total flux cleaned = 0.0112537 Jy ! Component: 750 - total flux cleaned = 0.0115027 Jy ! Component: 800 - total flux cleaned = 0.0117485 Jy ! Component: 850 - total flux cleaned = 0.0119106 Jy ! Component: 900 - total flux cleaned = 0.0121517 Jy ! Component: 950 - total flux cleaned = 0.0124684 Jy ! Component: 1000 - total flux cleaned = 0.0129382 Jy ! Component: 1050 - total flux cleaned = 0.0133253 Jy ! Component: 1100 - total flux cleaned = 0.0136327 Jy ! Component: 1150 - total flux cleaned = 0.0140151 Jy ! Component: 1200 - total flux cleaned = 0.0143193 Jy ! Component: 1250 - total flux cleaned = 0.0143945 Jy ! Component: 1300 - total flux cleaned = 0.0142439 Jy ! Component: 1350 - total flux cleaned = 0.0136367 Jy ! Component: 1400 - total flux cleaned = 0.0131791 Jy ! Component: 1450 - total flux cleaned = 0.0124879 Jy ! Component: 1500 - total flux cleaned = 0.0117915 Jy ! Component: 1550 - total flux cleaned = 0.0112451 Jy ! Component: 1600 - total flux cleaned = 0.0106172 Jy ! Component: 1650 - total flux cleaned = 0.00990553 Jy ! Component: 1700 - total flux cleaned = 0.00926626 Jy ! Component: 1750 - total flux cleaned = 0.00853871 Jy ! Component: 1800 - total flux cleaned = 0.00796495 Jy ! Component: 1850 - total flux cleaned = 0.0074672 Jy ! Component: 1900 - total flux cleaned = 0.0068792 Jy ! Component: 1950 - total flux cleaned = 0.00636916 Jy ! Component: 2000 - total flux cleaned = 0.00559392 Jy ! Total flux subtracted in 2048 components = 0.00480642 Jy ! Clean residual min=-0.005463 max=0.004967 Jy/beam ! Clean residual mean=-0.000121 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 2.04087 Jy keep ! Adding 107 model components to the UV plane model. ! The established model now contains 205 components and 2.04087 Jy wmap "J0339-0146_S_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.559 x 10.95 at -5.716 degrees (North through East) ! Clean map min=-0.010579 max=1.9634 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.96339 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00167366 device "J0339-0146_S_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.25573 0.25573 0.51146 1.02292 2.04584 4.09168 8.18336 16.3667 32.7335 65.4669 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.963 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.559 x 10.95 at -5.716 degrees (North through East) ! Clean map min=-0.010579 max=1.9634 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J0339-0146_S_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_1997_01_10_pus_uvs.log closed on Mon Jan 30 11:55:53 2006