! Started logfile: J0239-0234_S_1997_01_10_pus_uvs.log on Mon Jan 23 15:42:10 2006 obs J0239-0234_S_1997_01_10_pus_uva.fits ! Reading UV FITS file: J0239-0234_S_1997_01_10_pus_uva.fits ! AN table 1: 203 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.896114 visibilities/baseline/integration-bin. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 566 lines of history. ! ! Reading 32744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 float field_size field_size = 512 float field_cell field_cell = 0.5 float taper_size taper_size = 20. integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900052Jy sigma=0.004395 ! Fit after self-cal, rms=0.793092Jy sigma=0.003894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=6.802 mas, bpa=-2.422 degrees ! Estimated noise=1334.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.25098 Jy ! Component: 100 - total flux cleaned = 0.305726 Jy ! Total flux subtracted in 100 components = 0.305726 Jy ! Clean residual min=-0.012965 max=0.015333 Jy/beam ! Clean residual mean=0.000085 rms=0.003017 Jy/beam ! Combined flux in latest and established models = 0.305726 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.305726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418371Jy sigma=0.001297 ! Fit after self-cal, rms=0.418366Jy sigma=0.001297 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=8.099 mas, bpa=-2.714 degrees ! Estimated noise=783.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103259 Jy ! Component: 100 - total flux cleaned = 0.0014022 Jy ! Component: 150 - total flux cleaned = 0.00167688 Jy ! Component: 200 - total flux cleaned = 0.00187781 Jy ! Total flux subtracted in 200 components = 0.00187781 Jy ! Clean residual min=-0.008001 max=0.010591 Jy/beam ! Clean residual mean=0.000180 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.307604 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.307604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417628Jy sigma=0.001293 ! Fit after self-cal, rms=0.417517Jy sigma=0.001293 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.13 KP 0.84 ! LA 0.99 MK 0.97 NL 1.00* OV 1.04 ! PT 1.10 SC 0.80 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.11 HN 1.17 KP 1.01 ! LA 1.09 MK 1.00 NL 0.87 OV 1.01 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.02 KP 0.90 ! LA 0.80 MK 0.87 NL 0.87 OV 0.91 ! PT 1.26 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.16 KP 0.94 ! LA 0.88 MK 1.04 NL 0.95 OV 1.01 ! PT 1.13 SC 0.98 ! ! ! Fit before self-cal, rms=0.417517Jy sigma=0.001293 ! Fit after self-cal, rms=0.394387Jy sigma=0.001272 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=7.969 mas, bpa=-1.912 degrees ! Estimated noise=778.748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496436 Jy ! Component: 100 - total flux cleaned = 0.00528528 Jy ! Component: 150 - total flux cleaned = 0.00519492 Jy ! Component: 200 - total flux cleaned = 0.00511344 Jy ! Total flux subtracted in 200 components = 0.00511344 Jy ! Clean residual min=-0.004730 max=0.004577 Jy/beam ! Clean residual mean=0.000132 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.312717 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.312717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394282Jy sigma=0.001271 ! Fit after self-cal, rms=0.394265Jy sigma=0.001270 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394265Jy sigma=0.001270 ! Fit after self-cal, rms=0.398226Jy sigma=0.001269 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=7.929 mas, bpa=-1.845 degrees ! Estimated noise=781.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338683 Jy ! Component: 100 - total flux cleaned = 0.0042666 Jy ! Component: 150 - total flux cleaned = 0.00421412 Jy ! Component: 200 - total flux cleaned = 0.00411595 Jy ! Total flux subtracted in 200 components = 0.00411595 Jy ! Clean residual min=-0.003987 max=0.004667 Jy/beam ! Clean residual mean=0.000079 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.316833 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.316833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398173Jy sigma=0.001268 ! Fit after self-cal, rms=0.398233Jy sigma=0.001268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135993 Jy ! Component: 100 - total flux cleaned = -0.000220239 Jy ! Component: 150 - total flux cleaned = -0.000338388 Jy ! Component: 200 - total flux cleaned = -0.000446778 Jy ! Total flux subtracted in 200 components = -0.000446778 Jy ! Clean residual min=-0.003988 max=0.004576 Jy/beam ! Clean residual mean=0.000082 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.316386 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.316386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398230Jy sigma=0.001268 ! Fit after self-cal, rms=0.398234Jy sigma=0.001268 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398234Jy sigma=0.001268 ! Fit after self-cal, rms=0.400002Jy sigma=0.001268 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=7.902 mas, bpa=-1.811 degrees ! Estimated noise=784.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213594 Jy ! Component: 100 - total flux cleaned = 0.00289099 Jy ! Component: 150 - total flux cleaned = 0.00292138 Jy ! Component: 200 - total flux cleaned = 0.00287445 Jy ! Total flux subtracted in 200 components = 0.00287445 Jy ! Clean residual min=-0.003927 max=0.004600 Jy/beam ! Clean residual mean=0.000084 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.319261 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.319261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399968Jy sigma=0.001268 ! Fit after self-cal, rms=0.399978Jy sigma=0.001268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.6959e-05 Jy ! Component: 100 - total flux cleaned = -7.2291e-05 Jy ! Component: 150 - total flux cleaned = -0.000153266 Jy ! Component: 200 - total flux cleaned = -0.000190804 Jy ! Total flux subtracted in 200 components = -0.000190804 Jy ! Clean residual min=-0.003919 max=0.004542 Jy/beam ! Clean residual mean=0.000085 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.31907 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.31907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399975Jy sigma=0.001268 ! Fit after self-cal, rms=0.399976Jy sigma=0.001268 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399976Jy sigma=0.001268 ! Fit after self-cal, rms=0.401698Jy sigma=0.001268 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=12 mas, bpa=3.398 degrees ! Estimated noise=980.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202243 Jy ! Component: 100 - total flux cleaned = 0.00269006 Jy ! Component: 150 - total flux cleaned = 0.00272457 Jy ! Component: 200 - total flux cleaned = 0.00275081 Jy ! Total flux subtracted in 200 components = 0.00275081 Jy ! Clean residual min=-0.003969 max=0.004795 Jy/beam ! Clean residual mean=0.000172 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.321821 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.321821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401674Jy sigma=0.001268 ! Fit after self-cal, rms=0.401676Jy sigma=0.001268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.65378e-05 Jy ! Component: 100 - total flux cleaned = 9.48206e-05 Jy ! Component: 150 - total flux cleaned = 9.34708e-05 Jy ! Component: 200 - total flux cleaned = 9.40018e-05 Jy ! Total flux subtracted in 200 components = 9.40018e-05 Jy ! Clean residual min=-0.003950 max=0.004786 Jy/beam ! Clean residual mean=0.000171 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.321915 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.321915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401680Jy sigma=0.001268 ! Fit after self-cal, rms=0.401678Jy sigma=0.001268 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=7.883 mas, bpa=-1.773 degrees ! Estimated noise=787.136 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 7.883 at -1.773 degrees (North through East) ! Clean map min=-0.0036447 max=0.31855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=6.659 mas, bpa=-1.493 degrees ! Estimated noise=1314.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247394 Jy ! Component: 100 - total flux cleaned = 0.301442 Jy ! Component: 150 - total flux cleaned = 0.315122 Jy ! Component: 200 - total flux cleaned = 0.317407 Jy ! Total flux subtracted in 200 components = 0.317407 Jy ! Clean residual min=-0.005722 max=0.005471 Jy/beam ! Clean residual mean=0.000034 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.317407 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.317407 Jy ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=7.883 mas, bpa=-1.773 degrees ! Estimated noise=787.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414898 Jy ! Component: 100 - total flux cleaned = 0.00512435 Jy ! Component: 150 - total flux cleaned = 0.00577545 Jy ! Component: 200 - total flux cleaned = 0.00621705 Jy ! Total flux subtracted in 200 components = 0.00621705 Jy ! Clean residual min=-0.003727 max=0.004328 Jy/beam ! Clean residual mean=0.000081 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.323624 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.323624 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=12 mas, bpa=3.398 degrees ! Estimated noise=980.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147206 Jy ! Component: 100 - total flux cleaned = 0.000329036 Jy ! Component: 150 - total flux cleaned = 0.000372748 Jy ! Component: 200 - total flux cleaned = 0.000331392 Jy ! Total flux subtracted in 200 components = 0.000331392 Jy ! Clean residual min=-0.003689 max=0.004721 Jy/beam ! Clean residual mean=0.000162 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.323956 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.53386e-05 Jy ! Component: 100 - total flux cleaned = -0.000100061 Jy ! Component: 150 - total flux cleaned = -0.000161086 Jy ! Component: 200 - total flux cleaned = -0.000217732 Jy ! Total flux subtracted in 200 components = -0.000217732 Jy ! Clean residual min=-0.003733 max=0.004634 Jy/beam ! Clean residual mean=0.000163 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.323738 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.323738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=7.883 mas, bpa=-1.773 degrees ! Estimated noise=787.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378978 Jy ! Component: 100 - total flux cleaned = 0.00031511 Jy ! Component: 150 - total flux cleaned = 0.00025667 Jy ! Component: 200 - total flux cleaned = 0.000200842 Jy ! Total flux subtracted in 200 components = 0.000200842 Jy ! Clean residual min=-0.003449 max=0.004079 Jy/beam ! Clean residual mean=0.000080 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.323939 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.323939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401656Jy sigma=0.001268 ! Fit after self-cal, rms=0.401643Jy sigma=0.001268 wmodel J0239-0234_S_1997_01_10_pus_map.mod ! Writing 86 model components to file: J0239-0234_S_1997_01_10_pus_map.mod wobs J0239-0234_S_1997_01_10_pus_uvs.fits ! Writing UV FITS file: J0239-0234_S_1997_01_10_pus_uvs.fits wwins J0239-0234_S_1997_01_10_pus_map.win ! wwins: Wrote 2 windows to J0239-0234_S_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137457 Jy ! Component: 100 - total flux cleaned = 0.00207503 Jy ! Component: 150 - total flux cleaned = 0.00255675 Jy ! Component: 200 - total flux cleaned = 0.002902 Jy ! Component: 250 - total flux cleaned = 0.00306811 Jy ! Component: 300 - total flux cleaned = 0.003388 Jy ! Component: 350 - total flux cleaned = 0.00354376 Jy ! Component: 400 - total flux cleaned = 0.00374445 Jy ! Component: 450 - total flux cleaned = 0.00389185 Jy ! Component: 500 - total flux cleaned = 0.00427297 Jy ! Component: 550 - total flux cleaned = 0.00450449 Jy ! Component: 600 - total flux cleaned = 0.00477717 Jy ! Component: 650 - total flux cleaned = 0.00508722 Jy ! Component: 700 - total flux cleaned = 0.00530483 Jy ! Component: 750 - total flux cleaned = 0.00560186 Jy ! Component: 800 - total flux cleaned = 0.0058508 Jy ! Component: 850 - total flux cleaned = 0.0059321 Jy ! Component: 900 - total flux cleaned = 0.00609315 Jy ! Component: 950 - total flux cleaned = 0.00629076 Jy ! Component: 1000 - total flux cleaned = 0.00640726 Jy ! Component: 1050 - total flux cleaned = 0.00656079 Jy ! Component: 1100 - total flux cleaned = 0.0067866 Jy ! Component: 1150 - total flux cleaned = 0.00704528 Jy ! Component: 1200 - total flux cleaned = 0.00719181 Jy ! Component: 1250 - total flux cleaned = 0.00747878 Jy ! Component: 1300 - total flux cleaned = 0.00762077 Jy ! Component: 1350 - total flux cleaned = 0.00779606 Jy ! Component: 1400 - total flux cleaned = 0.00800291 Jy ! Component: 1450 - total flux cleaned = 0.00820658 Jy ! Component: 1500 - total flux cleaned = 0.00847544 Jy ! Component: 1550 - total flux cleaned = 0.00877344 Jy ! Component: 1600 - total flux cleaned = 0.00890467 Jy ! Component: 1650 - total flux cleaned = 0.00916346 Jy ! Component: 1700 - total flux cleaned = 0.00935522 Jy ! Component: 1750 - total flux cleaned = 0.0095134 Jy ! Component: 1800 - total flux cleaned = 0.0096705 Jy ! Component: 1850 - total flux cleaned = 0.00988747 Jy ! Component: 1900 - total flux cleaned = 0.0100714 Jy ! Component: 1950 - total flux cleaned = 0.0102535 Jy ! Component: 2000 - total flux cleaned = 0.0104033 Jy ! Total flux subtracted in 2048 components = 0.0105517 Jy ! Clean residual min=-0.001809 max=0.002103 Jy/beam ! Clean residual mean=0.000043 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.334491 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 236 components and 0.33449 Jy wmap "J0239-0234_S_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 7.883 at -1.773 degrees (North through East) ! Clean map min=-0.0027092 max=0.31741 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.317412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00063475 device "J0239-0234_S_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J0239-0234_S_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.59993 0.59993 1.19986 2.39972 4.79944 9.59888 19.1978 38.3955 76.791 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.317 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 7.883 at -1.773 degrees (North through East) ! Clean map min=-0.0027092 max=0.31741 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0239-0234_S_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J0239-0234_S_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0239-0234_S_1997_01_10_pus_uvs.log closed on Mon Jan 23 15:43:03 2006