! Started logfile: J0050-0929_X_1997_01_10_pus_uvs.log on Sun Jan 29 10:24:06 2006 obs J0050-0929_X_1997_01_10_pus_uva.fits ! Reading UV FITS file: J0050-0929_X_1997_01_10_pus_uva.fits ! AN table 1: 202 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788559 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 493 lines of history. ! ! Reading 28672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.43001 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7471 mas, bmaj=1.835 mas, bpa=-6.685 degrees ! Estimated noise=869.898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.11496 Jy ! Component: 100 - total flux cleaned = 1.29237 Jy ! Total flux subtracted in 100 components = 1.29237 Jy ! Clean residual min=-0.100570 max=0.128938 Jy/beam ! Clean residual mean=0.000420 rms=0.028147 Jy/beam ! Combined flux in latest and established models = 1.29237 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.29237 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.632906Jy sigma=0.004108 ! Fit after self-cal, rms=0.586744Jy sigma=0.003807 ! Inverting map and beam ! Estimated beam: bmin=0.7471 mas, bmaj=1.835 mas, bpa=-6.686 degrees ! Estimated noise=869.904 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9228 mas, bmaj=2.251 mas, bpa=-4.761 degrees ! Estimated noise=619.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.098303 Jy ! Component: 100 - total flux cleaned = 0.114852 Jy ! Component: 150 - total flux cleaned = 0.113015 Jy ! Component: 200 - total flux cleaned = 0.112991 Jy ! Total flux subtracted in 200 components = 0.112991 Jy ! Clean residual min=-0.058027 max=0.076514 Jy/beam ! Clean residual mean=-0.002727 rms=0.018019 Jy/beam ! Combined flux in latest and established models = 1.40536 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 1.40536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.583984Jy sigma=0.003726 ! Fit after self-cal, rms=0.583257Jy sigma=0.003722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9228 x 2.251 at -4.761 degrees (North through East) ! Clean map min=-0.053687 max=1.3468 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.966395 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.40 KP 0.91 ! LA 0.96 MK 0.94 NL 1.22 OV 0.89 ! PT 1.23 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.948981 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.89 HN 1.49 KP 0.92 ! LA 0.95 MK 0.91 NL 1.21 OV 0.92 ! PT 1.22 SC 1.11 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.959311 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 1.46 KP 0.91 ! LA 0.96 MK 0.91 NL 1.24 OV 0.88 ! PT 1.24 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.950517 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.49 KP 0.90 ! LA 0.97 MK 0.93 NL 1.26 OV 0.88 ! PT 1.24 SC 1.02 ! ! ! Fit before self-cal, rms=0.583257Jy sigma=0.003722 ! Fit after self-cal, rms=0.522839Jy sigma=0.003408 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522839Jy sigma=0.003408 ! Fit after self-cal, rms=0.521998Jy sigma=0.003403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9302 mas, bmaj=2.238 mas, bpa=-4.804 degrees ! Estimated noise=554.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.100691 Jy ! Component: 100 - total flux cleaned = -0.118587 Jy ! Component: 150 - total flux cleaned = -0.119684 Jy ! Component: 200 - total flux cleaned = -0.120129 Jy ! Total flux subtracted in 200 components = -0.120129 Jy ! Clean residual min=-0.016023 max=0.020461 Jy/beam ! Clean residual mean=0.000504 rms=0.004860 Jy/beam ! Combined flux in latest and established models = 1.28523 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 1.28523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505979Jy sigma=0.003285 ! Fit after self-cal, rms=0.505226Jy sigma=0.003280 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505226Jy sigma=0.003280 ! Fit after self-cal, rms=0.339073Jy sigma=0.002058 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336365 Jy ! Component: 100 - total flux cleaned = 0.0312943 Jy ! Component: 150 - total flux cleaned = 0.0288968 Jy ! Component: 200 - total flux cleaned = 0.0272689 Jy ! Total flux subtracted in 200 components = 0.0272689 Jy ! Clean residual min=-0.011070 max=0.012900 Jy/beam ! Clean residual mean=0.000400 rms=0.003459 Jy/beam ! Combined flux in latest and established models = 1.3125 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 1.3125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335782Jy sigma=0.002028 ! Fit after self-cal, rms=0.321170Jy sigma=0.001910 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9302 x 2.238 at -4.804 degrees (North through East) ! Clean map min=-0.010216 max=1.2838 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321170Jy sigma=0.001910 ! Fit after self-cal, rms=0.313158Jy sigma=0.001860 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313158Jy sigma=0.001860 ! Fit after self-cal, rms=0.308107Jy sigma=0.001816 ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=2.239 mas, bpa=-4.114 degrees ! Estimated noise=550.653 mJy/beam. ! Added new window around map position (-1.4, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562064 Jy ! Component: 100 - total flux cleaned = 0.0068948 Jy ! Component: 150 - total flux cleaned = 0.00713866 Jy ! Component: 200 - total flux cleaned = 0.00757034 Jy ! Total flux subtracted in 200 components = 0.00757034 Jy ! Clean residual min=-0.003257 max=0.004206 Jy/beam ! Clean residual mean=0.000165 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 1.32007 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 1.32007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307988Jy sigma=0.001815 ! Fit after self-cal, rms=0.305277Jy sigma=0.001791 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305277Jy sigma=0.001791 ! Fit after self-cal, rms=0.302941Jy sigma=0.001776 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302941Jy sigma=0.001776 ! Fit after self-cal, rms=0.301395Jy sigma=0.001762 ! Inverting map and beam ! Estimated beam: bmin=0.9204 mas, bmaj=2.234 mas, bpa=-4.031 degrees ! Estimated noise=550.123 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032735 Jy ! Component: 100 - total flux cleaned = 0.0041426 Jy ! Component: 150 - total flux cleaned = 0.00446476 Jy ! Component: 200 - total flux cleaned = 0.00446371 Jy ! Total flux subtracted in 200 components = 0.00446371 Jy ! Clean residual min=-0.003057 max=0.003787 Jy/beam ! Clean residual mean=0.000161 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.32453 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 1.32453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301352Jy sigma=0.001761 ! Fit after self-cal, rms=0.300200Jy sigma=0.001751 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=3.735 mas, bpa=7.012 degrees ! Estimated noise=707.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215468 Jy ! Component: 100 - total flux cleaned = 0.00221673 Jy ! Component: 150 - total flux cleaned = 0.00237702 Jy ! Component: 200 - total flux cleaned = 0.0024699 Jy ! Total flux subtracted in 200 components = 0.0024699 Jy ! Clean residual min=-0.002904 max=0.004412 Jy/beam ! Clean residual mean=0.000248 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 1.327 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 1.327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300201Jy sigma=0.001751 ! Fit after self-cal, rms=0.299322Jy sigma=0.001743 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7484 mas, bmaj=1.831 mas, bpa=-6.065 degrees ! Estimated noise=796.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.09853 Jy ! Component: 100 - total flux cleaned = 1.25969 Jy ! Component: 150 - total flux cleaned = 1.30128 Jy ! Component: 200 - total flux cleaned = 1.31499 Jy ! Total flux subtracted in 200 components = 1.31499 Jy ! Clean residual min=-0.006655 max=0.009134 Jy/beam ! Clean residual mean=0.000170 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 1.31499 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.31499 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9204 mas, bmaj=2.234 mas, bpa=-4.031 degrees ! Estimated noise=550.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857963 Jy ! Component: 100 - total flux cleaned = 0.011248 Jy ! Component: 150 - total flux cleaned = 0.0121709 Jy ! Component: 200 - total flux cleaned = 0.0126436 Jy ! Total flux subtracted in 200 components = 0.0126436 Jy ! Clean residual min=-0.003694 max=0.004086 Jy/beam ! Clean residual mean=0.000119 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 1.32764 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 1.32764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=3.735 mas, bpa=7.012 degrees ! Estimated noise=707.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012046 Jy ! Component: 100 - total flux cleaned = 0.00151528 Jy ! Component: 150 - total flux cleaned = 0.00157606 Jy ! Component: 200 - total flux cleaned = 0.00162424 Jy ! Total flux subtracted in 200 components = 0.00162424 Jy ! Clean residual min=-0.002900 max=0.003686 Jy/beam ! Clean residual mean=0.000183 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 1.32926 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 1.32926 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9204 mas, bmaj=2.234 mas, bpa=-4.031 degrees ! Estimated noise=550.123 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310439 Jy ! Component: 100 - total flux cleaned = -0.000308064 Jy ! Component: 150 - total flux cleaned = -0.000210758 Jy ! Component: 200 - total flux cleaned = -3.24698e-05 Jy ! Total flux subtracted in 200 components = -3.24698e-05 Jy ! Clean residual min=-0.002631 max=0.003911 Jy/beam ! Clean residual mean=0.000098 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 1.32923 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 1.32923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299165Jy sigma=0.001742 ! Fit after self-cal, rms=0.298470Jy sigma=0.001736 wmodel J0050-0929_X_1997_01_10_pus\_map.mod ! Writing 61 model components to file: J0050-0929_X_1997_01_10_pus_map.mod wobs J0050-0929_X_1997_01_10_pus\_uvs.fits ! Writing UV FITS file: J0050-0929_X_1997_01_10_pus_uvs.fits wwins J0050-0929_X_1997_01_10_pus\_map.win ! wwins: Wrote 3 windows to J0050-0929_X_1997_01_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013748 Jy ! Component: 100 - total flux cleaned = 0.00143773 Jy ! Component: 150 - total flux cleaned = 0.00107779 Jy ! Component: 200 - total flux cleaned = 0.00082399 Jy ! Component: 250 - total flux cleaned = 0.00058272 Jy ! Component: 300 - total flux cleaned = 0.000468176 Jy ! Component: 350 - total flux cleaned = 0.000431549 Jy ! Component: 400 - total flux cleaned = 0.000326185 Jy ! Component: 450 - total flux cleaned = 0.000461842 Jy ! Component: 500 - total flux cleaned = 0.000560391 Jy ! Component: 550 - total flux cleaned = 0.000752595 Jy ! Component: 600 - total flux cleaned = 0.000908937 Jy ! Component: 650 - total flux cleaned = 0.00109116 Jy ! Component: 700 - total flux cleaned = 0.00123839 Jy ! Component: 750 - total flux cleaned = 0.00135347 Jy ! Component: 800 - total flux cleaned = 0.00149451 Jy ! Component: 850 - total flux cleaned = 0.00163256 Jy ! Component: 900 - total flux cleaned = 0.0017139 Jy ! Component: 950 - total flux cleaned = 0.0018734 Jy ! Component: 1000 - total flux cleaned = 0.00197768 Jy ! Total flux subtracted in 1024 components = 0.00205499 Jy ! Clean residual min=-0.001314 max=0.001677 Jy/beam ! Clean residual mean=0.000064 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 1.33128 Jy keep ! Adding 69 model components to the UV plane model. ! The established model now contains 130 components and 1.33128 Jy wmap "J0050-0929_X_1997_01_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9204 x 2.234 at -4.031 degrees (North through East) ! Clean map min=-0.0027016 max=1.2728 Jy/beam ! Writing clean map to FITS file: J0050-0929_X_1997_01_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.27276 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552376 device "J0050-0929_X_1997_01_10_pus\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_X_1997_01_10_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1302 0.1302 0.260399 0.520798 1.0416 2.08319 4.16639 8.33278 16.6656 33.3311 66.6622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.272 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9204 x 2.234 at -4.031 degrees (North through East) ! Clean map min=-0.0027016 max=1.2728 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_X_1997_01_10_pus\_map.gif/vgif" ! Attempting to open device: 'J0050-0929_X_1997_01_10_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0050-0929_X_1997_01_10_pus_uvs.log closed on Sun Jan 29 10:24:35 2006